飞机失速/螺旋模型自由飞试验总体方案构想中几个问题的分析

本文对制定飞机失速/螺旋模型自由飞试验总体方案时必然会遇到的一些重要问题进行了分析,其内容涉及模型缩尺比例数 K 的最佳选取、确定飞机进入螺旋特征模拟高度 H_A 的依据、模型投放高度 H_m 的变化范围和试验模型质量 M_m 的控制问题。本文所作的各种分析和提出的原则对各种模型自由飞失速/螺旋试验研究具有普遍意义。     

传输型光学遥感器斜模式采样新方法研究

文章介绍了实现超模式采样焦平面3种解决方案面临的技术难点，为避开器件问题提出了一种新的斜模式采样方法。以任意两维周期采样理论为基础分析了斜模式采样技术的物理原理，并通过实验手段验证了斜模式采样技术的可行性。试验结果表明：改变探测器推扫方向的采样间距符模式采样技术可以提高传输型光学遥感器图像的空间分辨率，该技术相对于超模式采样技术，工程实现上要简单。     

基于阵列流型分离的稳健自适应波束形成

在较少的采样数或期望信号指向存在误差的情况下,传统的自适应波束形成算法的性能会受到较大影响。基于阵列流型分离的思想,提出一种新的自适应波束形成方法,可以在较少的采样数或期望信号指向存在误差时获得较稳健的性能。数值仿真证明了方法的有效性。     

新型单元的频率选择表面

在传统十字单元基础上,提出一种新型单元的频率选择表面(FSS)。分析传统十字单元FSS和新型单元FSS在大角度入射时的极化稳定性,并研究TM波入射角度变化时,中心频率的漂移及传输系数的变化。结果表明,传统十字单元FSS在45°入射时中心频率的极化稳定性很差,漂移量为406MHz,TM波由0°到45°入射时,中心频率漂移为448MHz;而新型单元FSS具有中心频率的角度稳定性,TM波入射角度由0°变到45°时,中心频率漂移量仅为28MHz,并且在大角度入射时具有中心频率极化稳定性。     

某型号机襟翼机构摩擦磨损可靠性分析与计算(英文)

本文应用空间机构的建模方法建立了某型号机襟翼机构运动的数学模型。当给出输入参数时，可通过此数学模型求出襟翼机构的理论输出参数。输入参数相同时，通过引入摩擦磨损量至数学模型可获得襟翼机构的实际输出参数，并在此基础上求得襟翼机构的摩擦磨损可靠性。     

Optimization of beamforming and path planning for UAV-assisted wireless relay networks

Recently, unmanned aerial vehicles （UAVs） acting as relay platforms have attracted considerable attention due to the advantages of extending coverage and improving connectivity for long-range communications. Specifically, in the scenario where the access point （AP） is mobile, a UAV needs to find an efficient path to guarantee the connectivity of the relay link. Motivated by this fact, this paper proposes an optimal design for beamforming （BF） and UAV path planning. First of all, we study a dual-hop amplify-and-forward （AF） wireless relay network, in which a UAV is used as relay between a mobile AP and a fixed base station （BS）. In the network, both of the AP and the BS are equipped with multiple antennas, whereas the UAV has a single antenna. Then, we obtain the output signal~to-noise ratio （SNR） of the dual-hop relay network. Based on the criterion of maximizing the output SNR, we develop an optimal design to obtain the solution of the optimal BF weight vector and the UAV heading angle. Next, we derive the closed-form outage probability （OP） expression to investigate the performance of the dual-hop relay network conveniently. Finally, computer simulations show that the proposed approach can obtain nearly optimal flying path and OP performance, indicating the effectiveness of the proposed algorithm. Furthermore, we find that increasing the antenna number at the BS or the maximal heading angle can significantly improve the performance of the considered relay network.     

MPEG音频标准技术与发展

MPEG(Moving Pictures Experts Group)系列标准由ISO/IEC制订,是计算机多媒体应用最广泛的国际标准之一.MPEG音频作为标准的重要内容,其发展经历了内容表示、内容描述以及互操作应用框架等阶段.然而,作为支撑技术,更高效的编码方法和更精确的描述手段仍然是当前研究工作的重点.综合分析了MPEG系列标准中音频技术的现状,并提出和讨论了进一步研究中需要解决的若干技术问题.      

Multimodule parallel series-loaded resonant converters

The design and implementation of a multimodule parallel series-loaded resonant (SLR) converter system is presented. The SLR converter to be paralleled is operated in the n=2 discontinuous mode (DCM). Its dc analysis and dynamic modeling are made. In parallel operation, an average control technique is proposed to compensate the mismatch in current control characteristics of each parallel converter. Good dynamic and static current sharing characteristics are obtained. In addition, to obtain good output voltage regulating control performance, a design procedure is presented to find the parameters of feedback voltage controller according to the prescribed specifications     

Space motion sickness preflight adaptation training: preliminary studies with prototype trainers

Preflight training frequently has been proposed as a potential solution to the problem of space motion sickness. The paper considers successively the otolith reinterpretation, the concept for a preflight adaptation trainer and the research with the Miami University Seesaw, the Wright Patterson Air-Force Base Dynamic Environment Simulator and the Visually Coupled Airborne Systems Simulator prototype adaptation trainers.     

碳化硅颗粒增强铝基复合材料及其口盖的研制

采用一种新型的复合材料替代传统的材料应用于航天产品推进舱上的口盖。经过复合材料制备、预镦粗变形、热轧和冷轧、热处理、表面阳极氧化等工艺过程，成功地制备了ＳｉＣｐ／ＬＤ１０复合材料口盖。探讨了制备过程中的工艺选择和工艺参数，并对复合材料板材的性能进行了测试。