Lithium micro-battery development at the Jet Propulsion Laboratory

Recent successes in the effort to miniaturize spacecraft components using MEMS technology, integrated passive components, and low power electronics have driven the need for very low power, low profile, low mass micro-power sources for micro/nanospacecraft applications. Recent work at JPL has focused upon developing thin film/micro-batteries compatible with temperature sensitive substrates. A process to prepare crystalline LiCoO₂ films with RF sputtering and moderate (<700°C) annealing temperature has been developed. Thin film batteries with cathode films prepared with this process have specific capacities approaching the practical limit for LiCoO₂, with acceptable rate capabilities and discharge voltage profiles. Solid-state micro-scale batteries have also been fabricated with feature sizes on the order of 50 microns     

Effects of bioreactor retention time on aerobic microbial decomposition of CELSS crop residues.

The focus of resource recovery research at the KSC-CELSS Breadboard Project has been the evaluation of microbiologically mediated biodegradation of crop residues by manipulation of bioreactor process and environmental variables. We will present results from over 3 years of studies that used laboratory- and breadboard-scale (8 and 120 L working volumes, respectively) aerobic, fed-batch, continuous stirred tank reactors (CSTR) for recovery of carbon and minerals from breadboard grown wheat and white potato residues. The paper will focus on the effects of a key process variable--bioreactor retention time--on response variables indicative of bioreactor performance. The goal is to determine the shortest retention time that is feasible for processing CELSS crop residues, thereby reducing bioreactor volume and weight requirements. Pushing the lower limits of bioreactor retention times will provide useful data for engineers who need to compare biological and physicochemical components. Bioreactor retention times were manipulated to range between 0.25 and 48 days. Results indicate that increases in retention time lead to a 4-fold increase in crop residue biodegradation, as measured by both dry weight losses and CO2 production. A similar overall trend was also observed for crop residue fiber (cellulose and hemicellulose), with a noticeable jump in cellulose degradation between the 5.3 day and 10.7 day retention times. Water-soluble organic compounds (measured as soluble TOC) were appreciably reduced by more than 4-fold at all retention times tested. Results from a study of even shorter retention times (down to 0.25 days), in progress, will also be presented.     

Optimization of moisture content for wheat seedling germination in a cellulose acetate medium for a space flight experiment.

The Porous Tube Plant Nutrient Delivery System (PTPNDS), a hydrophilic, microporous ceramic tube hydroponic system designed for microgravity, will be tested in a middeck locker of the Space Shuttle. The flight experiment will focus on hardware operation and assess its ability to support seed germination and early seedling growth in microgravity. The water controlling system of the PTPNDS hardware has been successfully tested during the parabolic flight of the KC-135. One challenge to the development of the space flight experiment was to devise a method of holding seeds to the cylindrical porous tube. The seed-holder must provide water and air to the seed, absorb water from the porous tube, withstand sterilization, provide a clear path for shoots and roots to emerge, and be composed of flight qualified materials. In preparation for the flight experiment, a wheat seed-holder has been designed that utilizes a cellulose acetate plug to facilitate imbibition and to hold the wheat seeds in contact with the porous tube in the correct orientation during the vibration of launch and the microgravity environment of orbit. Germination and growth studies with wheat at a range of temperatures showed that optimal moisture was 78% (by weight) in the cellulose acetate seed holders. These and other design considerations are discussed.     

DNA double strand break production and rejoining in V79 cells irradiated with light ions.

Low energy protons and other densely ionizing light ions are known to have RBE>1 for cellular end points relevant for stochastic and deterministic effects. The occurrence of a close relationship between them and induction of DNA dsb is still a matter of debate. We studied the production of DNA dsb in V79 cells irradiated with low energy protons having LET values ranging from 11 to 31 keV/micrometer, i.e. in the energy range characteristic of the Bragg peak, using the sedimentation technique. We found that the initial yield of dsb is quite insensitive to proton LET and not significantly higher than that observed with X-rays, in agreement with recent data on V79 cells irradiated with alpha particles of various LET up to 120 keV/micrometer. By contrast, RBE for cell inactivation and for mutation induction rises with the proton LET. In experiments aimed at evaluating the rejoining of dsb after proton irradiation we found that the amount of dsb left unrepaired after 120 min incubation is higher for protons than for sparsely ionizing radiation. These results indicate that dsb are not homogeneous with respect to repair and give support to the hypothesis that increasing LET leads to an increase in the complexity of DNA lesions with a consequent decrease in their repairability.     

Printed circuit board diagnosis using artificial neural networksand circuit magnetic fields

Testing of electronic systems using conventional testing methods has become more difficult and costly as these systems have become more complex and compact. Conventional testing methods and systems often require lengthy analysis to define testing strategies. These test systems may require lengthy test periods, complex stimulus and measurement instrumentation as well as complicated fixturing. The results are often ambiguous and require further interpretation. This paper presents an exploration of a “non-intrusive” test method based on interpreting changes in the magnetic field close to a Printed Circuit Board (PCB). Currents moving between devices on the PCB produce these magnetic fields. Changes of the PCB operational status due to faults cause changes in the associated magnetic field pattern that can be interpreted by Artificial Neural Networks (ANNs) for fault identification. An apparatus to collect magnetic field measurements is described along with some problems of collecting data. Typical magnetic field patterns for “known-good” and faulted PCBs are presented. Possible extensions of the method are discussed. This paper resulted from internally funded work at Southwest Research Institute (SwRI) concerning non-intrusive diagnostic techniques     

Evaluation of EarthRadar unexploded ordnance testing at Fort A.P.Hill, Virginia

Previously, K. Bakhtar and E. Sagal [ibid. vol. 17, pp. 4-11, 2002] made remarkable claims for the performance of the Bakhtar Associates ground-penetrating radar (GPR) in detecting and classifying buried unexploded ordnance (UXO). In this article, we report the results of the series of blind tests on the EarthRadar carried out during the Fall of 2000 and Spring of 2001, which led to very different conclusions regarding the radar's performance. The contents of this article are excerpted from the final report on the testing, prepared by the Institute for Defense Analyses     

Estimation of risk based on multiple events in radiation carcinogenesis of rat skin.

In the multistage theory of carcinogenesis, cells progress to cancer through a series of discrete, irreversible, heritable genetic alterations or mutations. However data on radiation-induced cancer incidence in rat skin suggests that some part of an intermediate repairable alteration may occur. Data are presented on cancer induction in rat skin exposed to the following radiations: 1. an electron beam (LET=0.34 keV/um, 2. a neon ion beam (LET=25 keV/um and 3. an argon ion beam (LET=125 keV/um. The latter 2 beams were generated by the Bevalac at the Lawrence Berkeley Laboratory, Berkeley, CA. About 6.0 cm2 of skin was irradiated per rat. The rats were observed every 6 weeks for at least 78 weeks and tumors were scored at first occurrence. Several histological types of cancer, including squamous and basal cell carcinomas, were induced. The cancer yield versus radiation dose was fitted by the quadratic equation (Y(D)=CLD+BD2), and the parameters C and B were estimated for each type of radiation. Analysis of the DNA from the electron-induced carcinomas indicated that K-ras and/or c-myc oncogenes were activated in all tumors tested, although only a small proportion of neon-induced tumors showed similar activation. In situ hybridization indicated that the cancers contain subpopulations of cells with differing amounts of c-myc and H-ras amplification. The results are consistent with the idea that ionizing radiation produces carcinogenically relevant lesions via 2 repairable events at low LET and via a non-repairable, linked event pathway at high LET; either pathway may advance the cell by 1 stage in the multistage model. The model, if validated, permits the direct calculation of cancer risk in rat skin in a way that can be subjected to experimental testing.     

The development of a series hybrid electric vehicle for near-termapplications

The design of a feasible hybrid electric vehicle for use in near-term applications is presented. The challenge involved cost effectiveness, acceleration, range, safety, and emissions, which were incorporated into the vehicle design. The relationship of the design goals was studied, and compromises were made to provide near-optimal system design. This process resulted in the selection and design of the major vehicle components. The design decisions and the actual vehicle components are reviewed     

Possible contribution of different energy sources to the production of organics in Titan's atmosphere.

A quantitative comparison of the products arising from the irradiation of a Titan's simulated atmosphere is presented. The energy sources used represent some of the main events that occur in the satellite's atmosphere. All of the compounds identified are classified in the hydrocarbon and nitrile chemical families. Almost all of the detected compounds in Titan's atmosphere are produced by one or more energy sources. The compounds with the highest energy yields include the C2 hydrocarbons, methanonitrile and ethanonitrile. The possibility of using some of the produced organics as tracer compounds during the Huygens descend to identify the leading energy form in the different atmospheric levels remains open.