Determination of optimal samples for robot calibration based on error similarity

Industrial robots are used for automatic drilling and riveting.The absolute position accuracy of an industrial robot is one of the key performance indexes in aircraft assembly,and can be improved through error compensation to meet aircraft assembly requirements.The achievable accuracy and the difficulty of accuracy compensation implementation are closely related to the choice of sampling points.Therefore,based on the error similarity error compensation method,a method for choosing sampling points on a uniform grid is proposed.A simulation is conducted to analyze the influence of the sample point locations on error compensation.In addition,the grid steps of the sampling points are optimized using a statistical analysis method.The method is used to generate grids and optimize the grid steps of a Kuka KR-210 robot.The experimental results show that the method for planning sampling data can be used to effectively optimize the sampling grid.After error compensation,the position accuracy of the robot meets the position accuracy requirements.     

JPEG有损压缩图像保留格式加密研究

本文针对JPEG格式有损压缩图像加解密过程中图像数据损失较大的问题,提出了基于码流方式的保留格式加解密算法,并对JPEG图像加密算法的处理效果、效率及安全性进行了测试。通过实验发现,本文算法能够获得较好的JPEG有损压缩图像的保留格式加密效果。     

基于左手材料的翼面隐身结构设计及优化

翼面隐身结构能同时满足飞行器机翼气动、结构和隐身的要求,但在空间有限的机翼中应用时,由于结构特点使其隐身效果受到限制。为了解决该问题,在传统隐身结构中加入左手材料(LHM)进行改进。首先选取一种典型的LHM,从隐身设计角度出发,利用其雷达散射截面(RCS)计算不同入射角度下的后向吸收率,对其电磁特性进行研究。然后根据LHM的电磁特性,将其应用于翼面隐身结构,在相同的RCS减缩效果下,应用LHM可有效降低隐身结构体积。最后,为了进一步提高隐身效果,提出一种夹芯型LHM翼面隐身结构,并对该隐身结构中的结构参数利用代理模型进行优化。研究结果表明,相较金属翼面段RCS降低了15dB以上,较相同结构的翼面隐身结构RCS降低了10dB以上。     

A closed-form solution for moving source localization using LBI changing rate of phase difference only

Due to the deficiencies in the conventional multiple-receiver localization systems based on direction of arrival(DOA) such as system complexity of interferometer or array and amplitude/phase unbalance between multiple receiving channels and constraint on antenna configuration,a new radiated source localization method using the changing rate of phase difference(CRPD)measured by a long baseline interferometer(LBI) only is studied. To solve the strictly nonlinear problem, a two-stage closed-form solution is proposed. In the first stage, the DOA and its changing rate are estimated from the CRPD of each observer by the pseudolinear least square(PLS) method,and then in the second stage, the source position and velocity are found by another PLS minimization. The bias of the algorithm caused by the correlation between the measurement matrix and the noise in the second stage is analyzed. To reduce this bias, an instrumental variable(IV) method is derived. A weighted IV estimator is given in order to reduce the estimation variance. The proposed method does not need any initial guess and the computation is small. The Cramer–Rao lower bound(CRLB) and mean square error(MSE) are also analyzed. Simulation results show that the proposed method can be close to the CRLB with moderate Gaussian measurement noise.     

Application in prestiction friction compensation for angular velocity loop of inertially stabilized platforms

To overcome the influence of the nonlinear friction on the gimbaled servo-system of an inertial stabilized platforms(ISPs) with DC motor direct-drive, the methods of modeling and compensation of the nonlinear friction are proposed. Firstly, the inapplicability of LuGre model when trying to interpret the backward angular displacement in the prestiction regime is observed experimentally and the reason is deduced theoretically. Then, based on the dynamic model of direct-drive ISPs, a modified LuGre model is proposed to describe the characteristic of the friction in the prestiction regime. Furthermore, the state switch condition of the three friction regimes including presliding, gross sliding and prestiction is presented. Finally, a composite compensation controller including a nonlinear friction observer and a feedforward compensator based on the novel LuGre model is designed to restrain the nonlinear friction and to improve the control precision. Experimental results indicate that compared with those of the conventional proportion–integration–differentiation(PID) control method and the PID plus LuGre model-based friction compensation method, the dwell-time has decreased from 0.2 s to almost 0 s, the position error decreased to 86.7%and the peak-to-peak value of position error decreased to 80% after the novel compensation controller is added. It concludes that the composite compensation controller can greatly improve the control precision of the dynamic sealed ISPs.     

飞机液压管路支撑的有限元建模方式对应力分析的影响

在飞机典型液压导管不同构型和负载模式下,做了应力试验测量,得到应力试验的数据,并在有限元环境MSC.PATRAN中,针对导管的不同构型建立有限元分析模型,对每种构型下支架与卡箍采用八种不同的简化方式,得到仿真结果。然后将不同简化方式的仿真结果与试验结果作对比分析,考虑不同因素(如支架刚度、卡箍橡胶刚度、导管与橡胶间的摩擦与滑动等)对分析结果的影响,找到了在工程上简单易行,精度上可以接受的支撑简化方法。     

民用飞机综合模块化航电系统分区和资源分配的研究

对比航电传统系统架构,分析了综合模块化航电系统(Integrated Modular Avionics,简称IMA)架构的优点;针对IMA系统功能的高集成度带来的资源分配难度和安全性要求,提出了IMA系统分区和资源分配策略,并给出了具体方法,对民用飞机IMA系统设计具有一定的指导意义和实用价值。     

Sensor alignment with Earth-centered Earth-fixed (ECEF) coordinatesystem

In this work, we formulate the multiple sensor alignment problem in an Earth-centered Earth-fixed (ECEF) coordinate system. The alignment algorithm maps the sensor measurements to the ECEF coordinates using a geodetic transformation, and attributes the discrepancies in the Earth-referenced system reported by each sensor to the sensor biases. Sensor biases are then estimated using the least squares (LS) technique. Simulated and real-life radar data are used to evaluate the performance of the proposed algorithm. Comparisons are made to those algorithms based on the standard stereographic projection     

Structural health management technologies for inflatable/deployable structures: Integrating sensing and self-healing

Inflatable/deployable structures are under consideration as habitats for future Lunar surface science operations. The use of non-traditional structural materials combined with the need to maintain a safe working environment for extended periods in a harsh environment has led to the consideration of an integrated structural health management system for future habitats, to ensure their integrity. This article describes recent efforts to develop prototype sensing technologies and new self-healing materials that address the unique requirements of habitats comprised mainly of soft goods. A new approach to detecting impact damage is discussed, using addressable flexible capacitive sensing elements and thin film electronics in a matrixed array. Also, the use of passive wireless sensor tags for distributed sensing is discussed, wherein the need for on-board power through batteries or hardwired interconnects is eliminated. Finally, the development of a novel, microencapuslated self-healing elastomer with applications for inflatable/deployable habitats is reviewed.     

赴美国、加拿大考察报告

介绍了赴美国国家标准与技术研究院。加拿大国家研究院等单位对化学计量进行考察的情况，浅谈了几点体会。