CFD predictions of LBO limits for aero-engine combustors using fuel iterative approximation

Lean blow-out (LBO) is critical to operational performance of combustion systems in propulsion and power generation. Current predictive tools for LBO limits are based on decadesold empirical correlations that have limited applicability for modern combustor designs. According to the Lefebvre’s model for LBO and classical perfect stirred reactor (PSR) concept, a load parameter (LP) is proposed for LBO analysis of aero-engine combustors in this paper. The parameters contained in load parameter are all estimated from the non-reacting flow field of a combustor that is obtained by numerical simulation. Additionally, based on the load parameter, a method of fuel iterative approximation (FIA) is proposed to predict the LBO limit of the combustor. Compared with experimental data for 19 combustors, it is found that load parameter can represent the actual combustion load of the combustor near LBO and have good relativity with LBO fuel/air ratio (FAR). The LBO FAR obtained by FIA shows good agreement with experimental data, the maximum prediction uncertainty of FIA is about ±17.5%. Because only the non-reacting flow is simulated, the time cost of the LBO limit prediction using FIA is relatively low (about 6 h for one combustor with computer equipment of CPU 2.66 GHz · 4 and 4 GB memory), showing that FIA is reliable and efficient to be used for practical applications.     

诚信建设的系统工程

诚信已成为一个涉及方方面面的社会系统工程,其建设可通过多级（递阶）控制和分解协调法,采用政府推动与监督,市场规范运作,社会广泛参与的运行模式,从诚信系统各子系统的目标任务出发,建立信用政策法规体系、信用服务市场体系、信用监管与奖惩体系和信用文化体系,从而推进全社会诚信系统工程建设。     

High-temperature tribological behaviors of a Cr-Si co-alloyed layer on TA15 alloy

A Cr-Si co-alloyed layer was successfully deposited on TA15 alloy by the double glow plasma surface technology to improve its poor wear resistance at elevated temperature.The microstructure,composition,and phase structure of the layer were investigated by SEM,EDS,and XRD.The tribological behaviors of the Cr-Si co-alloyed layer at 20 ℃ and 500 ℃ were analyzed in details.The results indicated that the friction coefficient and wear rate of the Cr-Si coalloyed layer at 20 ℃ and 500 ℃ were much lower than those of the substrate,which was due to higher hardness and superior elastic modulus.This layer may become an approach to effectively improving the wear resistance of TA15 alloy at elevated temperature.     

Performance simulation of high altitude scientific balloons

The design and operation of a high altitude scientific balloon requires adequate knowledge of the thermal characteristics of the balloon to make it safe and reliable. The thermal models and dynamic models of altitude scientific balloons are established in this paper. Based on the models, a simulation program is developed. The thermal performances of a super pressure balloon are simulated. The influence of film radiation property and clouds on balloon thermal behaviors is discussed in detail. The results are helpful for the design and operate of safe and reliable high altitude scientific balloons.     

隐式Runge-Kutta方法在非定常化学非平衡流动中的应用

推导了求解NS方程组的隐式龙格-库塔方法,并从稳定性、精度和效率三方面展开讨论。通过定常和非定常算例对该方法进行验算,分析表明该方法计算结果正确、稳定性好、精度高、效率高,适合求解大型复杂非定常化学非平衡流动。     

Start-up current adaptive control for sensorless high-speed brushless DC motors based on inverse system method and internal mode controller

The start-up current control of the high-speed brushless DC (HS-BLDC) motor is a chal-lenging research topic. To effectively control the start-up current of the sensorless HS-BLDC motor, an adaptive control method is proposed based on the adaptive neural network (ANN) inverse system and the two degrees of freedom (2-DOF) internal model controller (IMC). The HS-BLDC motor is identified by the online least squares support vector machine (OLS-SVM) algo-rithm to regulate the ANN inverse controller parameters in real time. A pseudo linear system is developed by introducing the constructed real-time inverse system into the original HS-BLDC motor system. Based on the characteristics of the pseudo linear system, an extra closed-loop feed-back control strategy based on the 2-DOF IMC is proposed to improve the transient response per-formance and enhance the stability of the control system. The simulation and experimental results show that the proposed control method is effective and perfect start-up current tracking perfor-mance is achieved.     

工业 S型热电偶1100℃以上温度点校准方法

越来越多的单位要求对工业S型热电偶1100℃以上温度点进行校准，但目前没有任何技术规范可供参考。本文就这一需求提供了三种解决方案，并对这三个方案的校准结果及不确定度进行对比分析，为计量机构根据客户的需求制定科学合理的校准方案提供参考。     

Effect of turbulence on NO formation in swirling combustion

Turbulence affects both combustion and NO formation. Fluctuation correlations are ideally used for quantitative analysis. From the instantaneous chemical reaction rate expression,ignoring the third-order correlation terms, the averaged reaction rate will have four terms, including the term of averaged-variable product, a concentration fluctuation correlation term, and temperature-concentration fluctuation correlation term. If the reaction-rate coefficient is denoted as K, the temperature fluctuation would be included in the K fluctuation. In order to quantitatively study the effect of turbulence on NO formation in methane-air swirling combustion, various turbulencechemistry models are tested. The magnitudes of various correlations and their effects on the time-averaged reaction rate are calculated and analyzed, and the simulation results are compared with the experimental measurement data. The results show that among various correlation moments, the correlation between the reaction-rate coefficient K fluctuation with the concentration fluctuation is most important and is a strong nonlinear term.     

A study on turbulence transportation and modification of Spalart–Allmaras model for shock-wave/turbulent boundary layer interaction flow

It is of great significance to improve the accuracy of turbulence models in shock-wave/ boundary layer interaction flow. The relationship between the pressure gradient, as well as the shear layer, and the development of turbulent kinetic energy in impinging shock-wave/turbulent boundary layer interaction flow at Mach 2.25 is analyzed based on the data of direct numerical simulation(DNS). It is found that the turbulent kinetic energy is amplified by strong shear in the separation zone and the adverse pressure gradient near the separation point. The pressure gradient was non-dimensionalised with local density, velocity, and viscosity. Spalart–Allmaras(S–A) model is modified by introducing the non-dimensional pressure gradient into the production term of the eddy viscosity transportation equation. Simulation results show that the production and dissipation of eddy viscosity are strongly enhanced by the modification of S–A model. Compared with DNS and experimental data, the wall pressure and the wall skin friction coefficient as well as the velocity profile of the modified S–A model are obviously improved. Thus it can be concluded that the modification of S–A model with the pressure gradient can improve the predictive accuracy for simulating the shock-wave/turbulent boundary layer interaction.     

基于多指标非线性控制的永磁同步电动机转速控制

应用精确线性化方法研究了永磁同步电动机的非线性控制问题.根据精确线性化理论,设计了永磁同步电动机状态反馈线性化控制器和相对阶为1的多指标输入输出反馈线性化控制器.多指标非线性控制器选择全状态量线性组合形式为输出函数,根据系统特征根配置方法,整定了输出函数中各状态量的反馈系数.比较2种控制器仿真结果发现,多指标非线性控制器可以实现对电动机转速的有效控制,且控制器结构简单,设计方便,动静态性能良好.