Simple solutions for hyperbolic and related position fixes

Navigation fixed from range differences to three stations and an additional piece of information are investigated. It is shown that if the additional information is the navigator altitude, or the range difference to a fourth station, the computation of the navigation fix is reduced to finding the roots of a quadratic. If the additional information is the range to another station, or that the navigator is on the Earth ellipsoid, the fix can be obtained by solving a quartic. By emphasizing the underlying geometric interpretations, these fixes and their simple solutions are made clear. The derivations also show that the same solution algorithms are applicable if the basic navigation measurements are range sums instead of range differences     

战斗机扭转敏捷性计算分析

介绍了战斗机扭转敏捷性概念及其尺度。为计算扭转敏捷性指标,提出了确定T_(RC90)指标的仿真计算方法。通过对某战斗机的实例计算,反映出该机的扭转敏捷性与机动性,操纵性之间的关系,其变化规律类似于国外飞机的试飞结果。但由于在仿真计算中作了某些假设,特别是未考虑驾驶员动力学特性和操纵系统动力学特性,故所得结果有待于今后在固基模拟器上验证、改进。     

一个扩压叶栅角区流向涡的物理模式

 本文采用烟显示和三维流场测量的方法,研究扩压叶栅角涡的物理模式。试验结果揭示了角涡发生、发展程中的流动形态和结构特点,以及角涡与叶面附面层相互作用的物理过程。在这个物理模式的基础上讨论了角涡引起高流动损失的物理机制。     

液氢液氧发动机喷管化学反应流数值模拟

用时间相关的半隐格式求解液氢液氧发动机喷管中的化学反应流动，考虑了６种燃烧产物，８个基元反应，得到了流动参数和产物的质量分数在流场中的分布，为发动机化学动力学损失计算和喷管热结构设计提供了必要数据。计算结果表明，采用半隐格式解决组分连续方程刚性引起的数值不稳定是有效的。     

二维等熵喷管流场计算

本文介绍了用于计算超音速火箭喷管特性线方法.从基本原理、几个问题的处理到计算结果的分析和处理,得到某些有益的结果,可供喷管设计和喷管受热分析参考.     

轴流压缩机粘性尾迹噪声研究

本文研究了微弯机翼在正弦阵风作用下的脉动升力,并导出计算公式,分析了动、静叶栅几何及气动参数对转子脉动升力及噪声级的影响。     

多孔喷管降低引射喷管噪声的实验研究

以多孔喷管代替普通收缩喷管或收-扩喷管作为引射喷管系统的主喷管,进行模型实验,结果表明,这种构型引射喷管不仅能显著降低噪声,而且具有良好的气动性能。     

含能工质激光烧蚀推进效率分析

为了分析在高能脉冲激光作用下,含能工质化学能对推进性能的影响,在实验的基础上,对固体含能工质激光烧蚀推进过程中的能量效率进行了初步分析。结果表明:含能工质自身化学能在激光推进中具有重要的作用;与火箭推进方式相比,固体含能材料激光烧蚀推进方式的能量利用效率更高。     

PBO纤维及其复合材料工艺性能研究

介绍了PBO纤维的结构特点及部分物理性能，研究了影响PBO纤维NOL环干法缠绕成型的几种主要工参数，对干法及湿法两种成型方法的Ф150mm压力容器性能进行了试验研究，对其破坏界面进行了电镜分析。结果表明：干法缠绕成型的Ф150mln压力容器的PV／W值最高可达47．55km，湿法缠绕成型的可以达到60．42km。     

Investigations of Stability & Dynamic Performances of a Current-Injected Regulator

The stability and dynamic performances of a buck/boost regulator employing a current-injected control are examined. Small-signal models for the power state, the multiloop error processor, and the duty-cycle pulse modulator are developed. The error-processor model which incorporates the current-injected loop, the dc loop, and the compensation network permits evaluation of the effects of each individual control loop and their combined efforts toward shaping the performance characteristics of the closed-loop system. Comparisons are made between this modeling approach and earlier approaches. Some important yet subtle dissimilarities are discussed. This model predicts the constant-frequency 50-percent duty-cycle instability which is inherent to the current-injected control.