Improvement in the GERB short wave flux estimations over snow covered surfaces

Because space-borne radiometers do not measure the Earth’s outgoing fluxes directly, angular distribution models (ADMs) are required to relate actual radiance measurement to flux at given solar angle, satellite-viewing geometries, surface, and atmospheric conditions. The conversion of one footprint broad-band radiance into the corresponding flux requires therefore one to first characterize each footprint in terms of surface type and cloud cover properties to properly select the adequate ADM.

A snow (and sea-ice) retrieval technique based on spectral measurements from the Spinning Enhanced Visible and Infrared Imager (SEVIRI) on board Meteosat 8 is presented. It has been developed to improve the scene identification and thus the ADM selection in the near-real time processing of the Geostationary Earth Radiation Budget (GERB) data at the Royal Meteorological Institute of Belgium. The improvement in the GERB short wave flux estimations over snow covered scene types resulting from angular conversion using dedicated snow ADMs (e.g., empirical snow ADMs and/or pre-computed theoretical snow ADM) instead of empirical snow-free ADMs is discussed.     

Cosmic ray anisotropy based on Yakutsk station in real time

The method has been developed to calculate galactic cosmic ray anisotropy parameters by using on-line data of the neutron monitor 24-NM-64 and muon telescope at the Yakutsk station. The preliminary analysis shows that characteristic changes in the anisotropy parameters caused by the first spherical harmonics of cosmic ray angular distribution are observed 1–2 days before the onset of the most part of large-scale geophysical disturbances on the Earth. There is reason to believe that the attraction of data of geophysical observations of other kinds will allow to develop the forecast methods for the arrival of large-scale interplanetary disturbances at the Earth.     

Modeling Pulsar Wind Nebulae

In the last few years, new observations by CHANDRA and XMM have shown that Pulsar Wind Nebulae present complex but similar inner features, with the presence of axisymmetric rings and jets, which are generally referred to as a jet-torus structure. Due to the rapid growth in accuracy and robustness of numerical schemes for relativistic fluid-dynamics, it is now possible to model the flow and magnetic structure of the relativistic plasma responsible for the emission. Recent results have clarified how the jet and rings are formed, suggesting that the morphology is strongly related to the wind properties, so that, in principle, it is possible to infer the conditions in the unshocked wind from the nebular emission. I will review here the current status in the modeling of Pulsar Wind Nebulae, and, in particular, how numerical simulations have increased our understanding of the flow structure, observed emission, polarization and spectral properties. I will also point to possible future developments of the present models.     

On bandwidth of solar subsecond bursts in cm-range

The goal is to study parameters of drifting type III bursts, and find out the emission mechanism of these bursts and understand what factors affect instantaneous spectral bandwidth of these bursts.     

Sulfur “concrete” for lunar applications – Sublimation concerns

Melting sulfur and mixing it with an aggregate to form “concrete” is commercially well established and constitutes a material that is particularly well-suited for use in corrosive environments. Discovery of the mineral troilite (FeS) on the moon poses the question of extracting the sulfur for use as a lunar construction material. This would be an attractive alternative to conventional concrete as it does not require water. However, the viability of sulfur concrete in a lunar environment, which is characterized by lack of an atmosphere and extreme temperatures, is not well understood. Here it is assumed that the lunar ore can be mined, refined, and the raw sulfur melded with appropriate lunar regolith to form, for example, bricks. This study evaluates pure sulfur and two sets of small sulfur concrete samples that have been prepared using JSC-1 lunar stimulant and SiO₂ powder as aggregate additions. Each set was subjected to extended periods in a vacuum environment to evaluate sublimation issues. Results from these experiments are presented and discussed within the context of the lunar environment.     

Simultaneous investigation of magnetospheric plasma and spacecraft charging

The results of magnetospheric plasma fluxes measurement in geosynchronous orbit are presented. The measurements were done onboard the geosynchronous Russian “Electro” spacecraft (SC) in 1995–1997 years. The diurnal variations of the plasma density and temperature were observed at various levels of geomagnetic activity.     

Intermittency of solar wind density fluctuations and its relation to sharp density changes

The paper presents the study of turbulent properties of the solar wind plasma, namely, the intermittency of fluctuations of the solar wind ion flux in the earlier unexplored region of comparatively high frequencies (0.01–1 Hz). Special attention is given to a comparison of intermittency for solar wind observation intervals containing sharp (shorter than 10 min) and high-amplitude (greater than 20%) changes of the ion flux to intervals without such changes. The solar wind observation intervals containing sharp changes of the flux are found to be essentially more intermittent than the intervals of quiet solar wind. Such a comparison allows one to reveal the fundamental difference in turbulent properties of the solar wind depending on the presence or absence of sharp boundaries in plasma structures.     

Classification of Gas-Dust Structures in the Upper Atmosphere Associated with the Exhausts of Rocket-Engine Combustion Products

This paper presents the results of investigating optical phenomena in the upper atmosphere that accompany rocket launches and are associated with specific features of the structure and dynamics of gas-dust formations in the upper atmosphere. The most intense, large-scale, and dynamic phenomena are induced by specific operation modes of rocket engines, in particular, by the staging and thrust cutoff in solid-propellant rocket engines, as well as by physical conditions in the upper atmosphere.     

Four-peak longitudinal distribution of the equatorial plasma bubbles observed in the topside ionosphere: Possible troposphere tide influence

In this paper we consider an idea of the troposphere tide influence on the character of the longitudinal variations in the distribution of the equatorial plasma bubbles (EPBs) observed in the topside ionosphere. For this purpose, the obtained EPB longitudinal patterns were compared with the thermosphere and ionosphere characteristics having the prominent “wave-like” longitudinal structures with wave number 4, which are uniquely associated with the influence of the troposphere DE3 tides. The characteristics of the equatorial mass density anomaly (EMA), equatorial ionization anomaly (EIA), zonal wind and pre-reversal E?×?B drift enhancement (PRE) were used for comparison. The equinox seasons during high solar activity were under consideration. It was obtained that the longitudinal patterns of the EMA and zonal wind show the surprising similarity with the EPB distributions (R???0.8, R???0.72). On the other hand, the resemblance with the ionosphere characteristics (EIA, PRE) is rather faint (R???0.37, R???0.12). It was shown that the thermosphere zonal winds are the most possible transfer mediator of the troposphere DE3 tide influence. The most successful moment for the transfer of the troposphere DE3 tide energy takes place in the beginning of the EPB production, namely, during the seed perturbation development.