新型封严涂层高温高速磨耗试验机的研制

为模拟航空涡轮发动机气路封严配副在工作状态下的磨损磨耗现象,研究封严涂层的可磨耗性能,研制了1套新型的可磨耗性能评价试验器。该试验器采用叶片-涂层刮削式磨耗副,使用模拟轮盘带动叶片高速旋转实现叶尖的切线速度;采用封严涂层试样径向进给以模拟叶片刮削切入;使用压电石英晶体3向测力仪定量测量瞬态刮削力;采用高速高温火焰加热试样。考核结果表明:试验器能够完成叶尖切线速度为0~300 m/s、进给速率为1.5~2025μm/s、加热温度为20~800℃条件下的磨耗试验,试验效果良好,数据稳定可靠。     

光纤陀螺标度因数及零偏温度误差补偿研究

首先分析了光纤陀螺产生温度误差的机理,在此基础上分别指出标度因数与零偏的误差补偿模型,提出了一种利用一组数据同时补偿标度因数及零偏的方法,直接表示输入与标度因数零偏补偿后的关系。最后通过实验验证了该方法不仅能够有效地补偿陀螺的温度误差,且其补偿精度优于原单独补偿的方法,同时该方法仅需一次温度实验,节省实验成本,具有较大的现实意义。     

Understanding Interplanetary Coronal Mass Ejection Signatures

While interplanetary coronal mass ejections (ICMEs) are understood to be the heliospheric counterparts of CMEs, with signatures undeniably linked to the CME process, the variability of these signatures and questions about mapping to observed CME features raise issues that remain on the cutting edge of ICME research. These issues are discussed in the context of traditional understanding, and recent results using innovative analysis techniques are reviewed.     

Observations of the Sun at Vacuum- Ultraviolet Wavelengths from Space. Part I: Concepts and Instrumentation

Space Science Reviews - Studies of the high-temperature solar atmosphere are to a large extent based on spectroscopic observations of emission lines and continuum radiation in the...     

Reduction in clamping force due to applied longitudinal load to aerospace structural bolted plates

The main purpose of the present work is to experimentally and numerically study why and how the magnitude of the bolt clamping force reduces in the aerospace structural bolted plates when they are subjected to a longitudinal tensile load. In the experimental method, a holed plate of aluminium alloy 7075-T6 was clamped using a single bolt fastener, and then tested under an increasing static longitudinal tensile load. The bolt clamping magnitude was determined by using the measured axial compressive strains of a steel bush placed between the nut and plate. Two clamped specimens with different initial clamping forces were studied. In each specimen the actual clamping forces were determined during the longitudinal loading on the plate. In the numerical method, a three-dimensional (3D) finite element model was generated in order to simulate and quantify the bolt clamping force in the plate model loaded in tension. Both experimental and numerical results showed that the clamping force reduces considerably in the aluminium bolted plates under the longitudinal tensile loading. This is because of the transverse contraction of the plate material that causes the clamped material to release from the initial compression, and as a result, the clamping force to relax.     

The Galactic Environment of the Sun: Interstellar Material Inside and Outside of the Heliosphere

Interstellar material (ISMa) is observed both inside and outside of the heliosphere. Relating these diverse sets of ISMa data provides a richer understanding of both the interstellar medium and the heliosphere. The galactic environment of the Sun is dominated by warm, low-density, partially ionized interstellar material consisting of atoms and dust grains. The properties of the heliosphere are dependent on the pressure, composition, radiation field, ionization, and magnetic field of ambient ISMa. The very low-density interior of the Local Bubble, combined with an expanding superbubble shell associated with star formation in the Scorpius-Centaurus Association, dominate the properties of the local interstellar medium (LISM). Once the heliosphere boundaries and interaction mechanisms are understood, interstellar gas, dust, pickup ions, and anomalous cosmic rays inside of the heliosphere can be directly compared to ISMa outside of the heliosphere. Our understanding of ISMa at the Sun is further enriched when the circumheliospheric interstellar material is compared to observations of other nearby ISMa and the overall context of our galactic environment. The IBEX mission will map the interaction region between the heliosphere and ISMa, and improve the accuracy of comparisons between ISMa inside and outside the heliosphere.     

The Solar Wind Around Pluto (SWAP) Instrument Aboard New Horizons

The Solar Wind Around Pluto (SWAP) instrument on New Horizons will measure the interaction between the solar wind and ions created by atmospheric loss from Pluto. These measurements provide a characterization of the total loss rate and allow us to examine the complex plasma interactions at Pluto for the first time. Constrained to fit within minimal resources, SWAP is optimized to make plasma-ion measurements at all rotation angles as the New Horizons spacecraft scans to image Pluto and Charon during the flyby. To meet these unique requirements, we combined a cylindrically symmetric retarding potential analyzer with small deflectors, a top-hat analyzer, and a redundant/coincidence detection scheme. This configuration allows for highly sensitive measurements and a controllable energy passband at all scan angles of the spacecraft.     

The Galileo Heavy element monitor

The Heavy Ion Counter on the Galileo spacecraft will monitor energetic heavy nuclei of the elements from C to Ni, with energies from 6 to 200 MeV nucl^-1. The instrument will provide measurements of trapped heavy ions in the Jovian magnetosphere, including those high-energy heavy ions with the potential for affecting the operation of the spacecraft electronic circuitry. We describe the instrument, which is a modified version of the Voyager CRS instrument.     

Pickup protons in the heliosphere

We calculate the conditions of pickup protons inside the termination shock. Outside 50 AU the partial pressure of pickup protons is greater than the magnetic pressure by a factor of > 10, and greater than the partial pressure of solar wind protons by a factor of > 100. Thus, pickup protons have a significant dynamical influence on the structures of the solar wind in the outer heliosphere.