The applications of lower power satellites for direct television broadcasting

The use of 12 GHz satellites for TV broadcasting directly to individual homes and small communities has been the subject of analysis and design study by groups in many countries. Implementation of the concept has been slow to follow because of the high satellite transmitter powers of from 100 to 450 W that have usually been determined to be necessary. Accumulated experience in Canada with 12 GHz operation and the evolution of technology are leading to changes in the concept of direct broadcasting such that lower power satellites may be capable of meeting the requirements.

Hermes, the Canadian/U.S. 12/14 GHz Communications Technology Satellite, has been in use for over 3 years in a program of experiments and measurements. This program has included an extensive six month experiment in direct broadcasting to 7 small communities. Experience with Hermes has shown that the signal strength is stable over long periods of time and that in Canada, significant precipitation attenuation at 12 GHz is of relatively short duration and typically occurs only during certain seasons. Operation with low propagation margins is feasible if some picture degradation and some outages at these times are acceptable. The frequency and duration of occurrence of outages can be controlled by the Earth station G/T which is cost sensitive. An individual may choose to use a low cost system with a small antenna and accept a degraded picture and outages at some times. A small community may choose to pay more for a larger antenna and lower noise receiver to achieve better performance.

Developments in technology are reducing the noise figure of mass-producible receivers from more than 6 dB to as low as 4 dB. Another technology contribution is the use of reduced bandwidth and other signal processing techniques in low-cost receivers. While use of such techniques may introduce distortions that would be unacceptable in rebroadcasting systems, there is little impact for individual and community reception. Use of both technologies reduce the required satellite EIRP or ground terminal G/T.

A field trial was begun in April 1979 to test these concepts for use in television program delivery. One hundred Earth stations capable of being tuned across a 500 MHz band and having antennas with diameters of either 1.2 m or 1.8 m are being installed for a test in Canada to receive TV signals from the 20 W transponders of ANIK-B (peak EIRP of 51 dBw) on an experimental basis. The acceptability of the video signals and the technical performance of the low-cost terminals in the bands of non-technical users are being evaluated.

The paper will summarize the concept of TV broadcasting with lower power satellites and describe the results to date of the ANIK-B field trials.     

Low-velocity detonations in cast and pressed high explosives

A model of low velocity detonations in charges of cast and pressed high explosives confined in metal tubes with thin walls is suggested. An analytical solution is obtained and velocities and pressures of stationary LVD waves are calculated as functions of the parameters of the wall confinement. The fraction of the total chemical energy transferred to maintain the shock wave and the average rate of reaction in the wave are estimated and the dynamics of transient predetonation processes are analysed. An explanation of the causes of the secondary shock wave formation in the transition from deflagration to normal detonations is suggested and the delay of this secondary wave is calculated and compared with experimental data.     

Transport Characteristics of Macroparticles in Dusty Plasma Induced by Solar Radiation under Microgravity Conditions

The transport characteristics of macroparticles, charged by the solar radiation under microgravity conditions, were investigated by analyzing the videorecords of experiments carried out onboard the Mirorbital station. The temperature, distributions of velocities, charge, friction coefficient, and diffusion coefficient were obtained for bronze particles.     

Numerical Simulation of Impact Loading on Solid Propellant Within an Orthotropic Shell

The strain–stress state of the solid propellant rocket engines (SPREs) is simulated under impact. The effect of orientation of elastic and strength properties of orthotropic organoplastic shell material on the strain–stress state of the solid propellant is investigated. Normal and oblique impact of single steel cylinder projectiles, both simultaneous and at different times of multiple, converging steel spheric particles with SPRE are investigated in this study. The investigation is conducted numerically. The numerical modeling was carried out in a three-dimensional formulation by the method of finite elements for the continuous approach of the mechanics of a deformable solid. The destruction of the anisotropic material is described by the tensor-polynomial criterion of the fourth degree, which takes into account the influence of hydrostatic pressure.     

On the dynamics of a novel manipulator with slewing and deployable links

Using a novel space platform-based manipulator with slewing and deployable links, the paper addresses two issues of considerable importance: (a) How important is it to model flexibility of the system? (b) How many modes are needed to adequately represent the elastic character? Results suggest that the fundamental mode is able to capture physics of the response quite accurately. Due to its massive character, the platform dynamics is virtually unaffected, even by severe maneuvers of the manipulator. Hence, treating the platform as rigid would save the computational cost without affecting the accuracy. Although the link flexibility does affect the manipulator's tip vibration, the joint and platform vibrations remain negligible. The revolute joint flexibility appears to be an important parameter affecting both the joint as well as tip responses. The information should prove useful in the design of this new class of manipulators.     

Influence of Trapped Plasma on the Structure of Collisionless Thin Current Sheets

Using both analytical and numerical models of the collisionless anisotropic current sheet generated by the impinging flows of transient ions, we have studied the self-consistent solutions taking the plasma trapped in the sheet into account. It is demonstrated that there exists a limited window in the space of system parameters where self-consistent solutions can exist. When the density of the quasi-trapped plasma is sufficiently large, a redistribution of the total current can be a cause of the sheet decay, when the local current of the trapped particles compensate (totally or in part) the main current in the center and at the edges of the sheet, while the total current generated by ions on the trapped trajectories vanishes.     

Using the PROGRESS transport spacecraft in structure of the International Space Station for realization of scientific experiments under microgravity conditions

The problem is considered of using the PROGRESS transport spacecraft, which will deliver the payload on the ISS, as a free flying platform for realization of space experiments. For maintenance of the ISS 5-6 PROGRESS flights per year are planned. Usually after delivery of the payload the PROGRESS undocks from the ISS and burns down in the Earth atmosphere. However, the operating conditions of its onboard systems allow to prolong operation and to make free flight near to the station and repeatedly to be docked to it. It is offered to use this possibility for performing experiments on Material Science.     

Bubble detector characterization for space radiation

In light of the importance of the neutron contribution to the dose equivalent received by space workers in the near-Earth radiation environment, there is an increasing need for a personal dosimeter that is passive in nature and able to respond to this neutron field in real time. Recent Canadian technology has led to the development of a bubble detector, which is sensitive to neutrons, but insensitive to low linear energy transfer (LET) radiation. By changing the composition of the bubble detector fluid (or “superheat”), the detectors can be fabricated to respond to different types of radiation. This paper describes a preliminary ground-based research effort to better characterize the bubble detectors of different compositions at various charged-particle accelerator facilities, which are capable of simulating the space radiation field.     

Optimum Number of Stages in a Staged Vehicle

The problem of optimum partitioning of a staged vehicle (SV) and determination of the minimal number of stages to provide for a maximum velocity in the vertical SV motion in a homogeneous gravity field is considered at a given value of payload mass.     

Thrust modulation of solid propellant rockets by a fluidic vortex valve with secondary combustion

An analytical model for calculation of the thrust and pressure modulation of a solid propellant rocket by means of a fluidic vortex valve with secondary combustion has been developed. Thrust control by the vortex valve method was found superior to the axial injection of control flow. Addition of oxygen in the injected flow improves the energetic performance of the system as well as the thrust modulation capability. Experiments have been conducted using a mixture of nitrogen and oxygen as the injection gas. The two main parameters investigated in a series of experiments were the oxygen percentage in the injection gas and the ratio between the mass flow rates of the control gas and the solid propellant combustion products. The results show an increase of thrust by a factor of 2 for a 25% addition in mass flow rate by secondary injection at optimal conditions.