A point-wise least squares spectral analysis (LSSA) of the Caspian Sea level fluctuations,using TOPEX/Poseidon and Jason-1 observations

The Caspian Sea has displayed considerable fluctuations in its water level during the past century. Knowledge of such fluctuation is vital for understanding the local hydrological cycles, climate of the region, and construction activities within the sea and along its shorelines. This study established a point-wise satellite altimetry approach to monitor the fluctuations of the Caspian Sea using a complete dataset of TOPEX/Poseidon for the period 1993 to the middle of 2002, and its follow-on Jason-1 for the period 2002 to August 2009. Therefore, 280 virtual time-series were constructed to monitor the fluctuations. The least squares spectral analysis (LSSA) method is, then employed to find the most significant frequencies of the time-series, while the statistical method of principle component analysis (PCA) is applied to extract the dominant variability of level variations. The study also used the observations of TOPEX/Poseidon and Jason-1 over the Volga River along with 5 years of Volga’s water discharge to study its influence on the Caspian Sea level changes. The LSSA results indicate that the lunar semidiurnal (M2) and the Sun semidiurnal (S2) frequencies are the main tidal frequencies of the Caspian Sea with the mean amplitude of 4.2 and 2.8 cm, respectively. A statistically significant long-term frequency (12.5-years period) is also found from altimetry and tide gauge observations. A phase lag, related to the inter-annual frequencies of the Volga River was detected from the point-wise time-series showing level propagation from the northwest to the southeast of the sea. The cross-correlation between the power spectrum of Volga and that of the northern-most, middle, and southern-most points within the Caspian Sea were respectively 0.63, 0.51 and 0.4 of zero-lag correlation, corroborating the influence of the Volga River. The result of PCA also shows that different parts of the Caspian Sea exhibit different amplitudes of level variations, indicating that the point-wise approach, when employing all available satellite measurements could be a suitable method for a preliminary monitoring of this inland water resource as it gives accurate local fluctuations.     

Dynamic orbit propagation in a gravitational field of an inhomogeneous attractive body using the Lagrange coefficients

The analytical methods have nearly been replaced by the numerical methods due to their higher accuracy and accessibility of computation facilities. The semi-analytical Lagrange method of orbit propagation using f and g series is a competitive alternative to the numerical integration technique if the Lagrange coefficients are derived in a full gravitational field. In this paper, a generalization of the Lagrange method of orbit propagation is introduced. In other words, we introduce a complete form of the Lagrange coefficients in all force fields developed in the spherical harmonics for example full gravitational field of the Earth. The method is numerically compared with the numerical integration technique. In order to show the numerical performance of the method, it has been implemented for orbit propagation of a GPS-like MEO and CHAMP-like LEO satellites. Discrepancy at centimeter level for CHAMP-like and sub-millimeter accuracy for GPS-like satellites shows relatively high performance of the developed algorithm. Compared to integration method, the proposed Lagrange method is nearly faster by a factor two for small Nmax and four for large Nmax.     

Experimental investigation of hot and cold side jet interaction with a supersonic cross-flow

This paper reports on experimental aerodynamic investigations on a high-speed missile with side jet control especially with regard to the interaction of cold and hot side jets with supersonic cross-flow. The hot jets were generated with solid propellants. To analyze the effect of the hot jet in relation to side jet control, wall pressure distributions were measured in the area of jet interaction. As a test parameter, the jet pressure ratio was varied and schlieren images were taken to visualize the shocks. In addition, the development of large-scale vortex structures on hot gas jets was detected with high-speed videos. The frame sequences show periodical turbulent jet structures and permit the manual evaluation of their spatial distribution. Analyzing the images, the convection velocities of the large-scale structures and their convection angles were determined. The convection velocities reach the magnitude of cross-flow velocity shortly behind the hot jet exit.     

Automatic detection of geomagnetic sudden commencement via time–frequency clusters

One of global processes in ionosphere–thermosphere–magnetosphere system is the geomagnetic storms. It is of great importance to develop an algorithm that auto-detects sudden commencement because it could be an indicator of onset of the geomagnetic storm. Automatic detection of geomagnetic sudden commencement is based on time–frequency clusters generated by spectrogram. Proposed algorithm is tested on data set collected from stations belong to the international real-time magnetic observatory network (INTERMAGNET). Maximum standard deviation of algorithm detection times is observed to be one minute of the corresponding arrival times published by National Geophysical Data Center (NGDC).     

Investigation of the role of aziridine bonding agents on the aging of the composite solid rocket propellant(CSRP)

The role of bonding agents on the aging characteristics is one of the important research topics.Aging program of the prepared propellant samples was conducting as follows:Five samples,two free of bonding agents,and three containing an aziridine based bonding agents(MAPO,HX-752,MAT4),four samples based on different bonding and curing agents all were aged at 70 ℃.The prepared bonding agent "MAT4" gave remarkable improvements and resulted in highly stable mechanical properties comparing with HX-752 or MAPO.The selected bonding agents family inhibited the rate of decomposition of the propellants during the aging periods and supported the propellant matrix against decomposition at the elevated temperatures.      

Systematic examination of the geomagnetic storm sudden commencement using multi resolution analysis

Geomagnetic storm sudden commencements (SSC) contain a wealth of information which is useful in many applications. It is important to point out that the SSCs used in this study are sampled at the rate of one sample per second in order get use of such high resolution data. In this paper, two studies are made on the geomagnetic SSC and an SSC onset automatic detection algorithm is introduced. The first study is about finding the relationship between the SSC rise time and its amplitude. Where it is found that there is a positive correlation between the amplitude and the amplitude gradient which is the amplitude divided by rise time. The second study is checking the spectrum of the SSC, starting from its onset until the end of the SSC rise time. This check had proved that the SSC contains both low and high frequency regions. This led us to introduce a new term, namely the SSC variation rate (VR). This VR is defined as the maximum rate of change of the field in the higher-frequency region of the SSC. These two studies were the guide to build an SSC automatic detector of one sample per second data using multi resolution analysis (MRA) of the discrete wavelet transform (DWT). The data set contains 134 SSCs with different VRs that were collected from the Circum-pan Pacific Magnetometer Network (CPMN). It is found that the standard deviation of the detection error is 41 s and that the average error is 9 s. From the calculated error distribution function, it is found that the detection error is within the range of −1.5 to 3 min. The detection process, as will be shown in the article, takes 70 s for one station and 3 min if the decision is related to the detection(s) of other stations. These results demonstrate the superiority of the proposed algorithm over other algorithms in which the detection error ranges between −8 and 5 min and the detection process takes 2–10 min. In addition to being faster and more accurate than the other algorithms, the proposed algorithm is the first algorithm that automatically detects the SSC onset times from high-resolution data unlike previous studies that focused on determining the SSC times automatically using one-minute resolution data.     

含中央分层缺陷层合板的压缩性能研究

通过考察层合板厚度(含铺层形式)、分层位置与大小等因素对压缩强度的影响,并采用局部屈曲、分层扩展以及软化夹杂等3种模型对含分层层合板的压缩强度进行了计算和破坏机理分析。得出如下结果:厚板对分层缺陷不敏感,中等厚度和薄层合板比较敏感;缺陷的位置和大小对层合板压缩强度的影响没有明显的规律可循;3种模型中软化夹杂模型效果较好,说明大部分含缺陷层合板的压缩过程具有分层扩展、基体开裂等损伤交杂在一起的特点,这导致了试件的破坏。     

大型壁板数控钻铆的三点快速调平算法

 针对传统机翼壁板铆接过程中托架调平所存在的问题，提出一种基于有限曲面加工区域的三点调平算法。利用机翼表面上待钻铆点附近三点的坐标来表征该铆接区域的空间姿态，通过钻铆系统的几何结构模型所确定的坐标变化矩阵，逆解出调平所需的各运动副位移增量。在钻铆系统结构模型和机翼曲面方程的基础上建立三点选取的优化模型，并利用外点罚函数法确定其优化解。西安飞机工业(集团)责任有限公司ARJ21新支线飞机的机翼壁板试验件数控钻铆结果表明，该算法能够实现较高的加工精度和调平效率。     

Multidisciplinary Design and Optimization of Multistage Ground-launched Boost Phase Interceptor Using Hybrid Search Algorithm

This article proposes a multidisciplinary design and optimization (MDO) strategy for the conceptual design of a multistage ground-based interceptor (GBI) using hybrid optimization algorithm, which associates genetic algorithm (GA) as a global optimizer with sequential quadratic programming (SQP) as a local optimizer. The interceptor is comprised of a three-stage solid propulsion system for an exoatmospheric boost phase intercept (BPI). The interceptor's duty is to deliver a kinetic kill vehicle (KKV) to the optimal position in space to accomplish the mission of intercept. The modules for propulsion, aerodynamics, mass properties and flight dynamics are integrated to produce a high fidelity model of the entire vehicle. The propulsion module comprises of solid rocket motor (SRM) grain design, nozzle geometry design and performance prediction analysis. Internal ballistics and performance prediction parameters are calculated by using lumped parameter method. The design objective is to minimize the gross lift off mass (GLOM) of the interceptor under the mission constraints and performance objectives. The proposed design and optimization methodology provide designers with an efficient and powerful approach in computation during designing interceptor systems.     

Aircraft robust multidisciplinary design optimization methodology based on fuzzy preference function

This paper presents a Fuzzy Preference Function-based Robust Multidisciplinary Design Optimization (FPF-RMDO) methodology. This method is an effective approach to multidisciplinary systems, which can be used to designer experiences during the design optimization process by fuzzy preference functions. In this study, two optimizations are done for Predator MQ-1 Unmanned Aerial Vehicle (UAV): (A) deterministic optimization and (B) robust optimization. In both problems, minimization of takeoff weight and drag is considered as objective functions, which have been optimized using Non-dominated Sorting Genetic Algorithm (NSGA). In the robust design optimization, cruise altitude and velocity are considered as uncertainties that are modeled by the Monte Carlo Simulation (MCS) method. Aerodynamics, stability and control, mass properties, performance, and center of gravity are used for multidisciplinary analysis. Robust design optimization results show 46% and 42% robustness improvement for takeoff weight and cruise drag relative to optimal design respectively.