Interactivity in map learning: The effect of cognitive load

The hypothesis that active learning is beneficial relative to passive observation was assessed in the context of spatial knowledge derived from maps. Active and passive participants studied a map either while performing a simultaneous spatial tapping task (high cognitive load) or in the absence of this task (low cognitive load). Active participants controlled how the map was learned, with passive participants observing map learning without exercising control. Spatial recall was assessed in two tests, directional judgements and map drawing. Map drawing and directional judgments showed a similar pattern of results, with performance detrimentally affected by a high load for active participants, but not for passive participants. The results indicate that activity and cognitive load interact, suggesting that active learning can be detrimental to spatial learning in cognitively demanding tasks.     

液氧/甲烷同轴喷雾及火焰稳定的试验

介绍了液氧和气态甲烷的低温同轴喷雾燃烧试验,试验使用了光学诊断方法如阴影法和火焰分光光谱法记录了试验中的喷雾和火焰信息,讨论了不同燃烧室压力和喷注无量纲数如韦伯数(We)和气液动量流率比下的雾化和火焰稳定情况。试验结果表明,燃烧室压力对射流雾化和火焰稳定有显著影响,增加燃烧室压力有利于火焰稳定于靠近喷注器面的地方,研究中没有发现火焰吹离距离和韦伯数之间有明显的关系式。液氧射流核心长度随气液动量流率比的增大而下降。雾化质量对液氧/甲烷同轴喷雾的火焰稳定性有明显的影响。     

故障预测与健康管理(PHM)技术的现状与发展

 结合故障预测与健康管理(PHM)的技术发展过程,阐述了PHM的应用价值。论述了PHM技术系统级应用问题,提出了故障诊断与预测的人-机-环完整性认知模型,并依此对蓬勃发展的故障诊断与故障预测技术进行了分类与综合分析,给出了PHM技术的发展图像。针对故障诊断与预测的不确定性特征,对故障诊断与预测技术的性能要求、定量评价与验证方法进行了分析。最后,以PHM技术的工程应用为线索,提出了PHM技术发展中的几个问题。     

The Thermal Emission Imaging System (THEMIS) for the Mars 2001 Odyssey Mission

The Thermal Emission Imaging System (THEMIS) on 2001 Mars Odyssey will investigate the surface mineralogy and physical properties of Mars using multi-spectral thermal-infrared images in nine wavelengths centered from 6.8 to 14.9 μm, and visible/near-infrared images in five bands centered from 0.42 to 0.86 μm. THEMIS will map the entire planet in both day and night multi-spectral infrared images at 100-m per pixel resolution, 60% of the planet in one-band visible images at 18-m per pixel, and several percent of the planet in 5-band visible color. Most geologic materials, including carbonates, silicates, sulfates, phosphates, and hydroxides have strong fundamental vibrational absorption bands in the thermal-infrared spectral region that provide diagnostic information on mineral composition. The ability to identify a wide range of minerals allows key aqueous minerals, such as carbonates and hydrothermal silica, to be placed into their proper geologic context. The specific objectives of this investigation are to: (1) determine the mineralogy and petrology of localized deposits associated with hydrothermal or sub-aqueous environments, and to identify future landing sites likely to represent these environments; (2) search for thermal anomalies associated with active sub-surface hydrothermal systems; (3) study small-scale geologic processes and landing site characteristics using morphologic and thermophysical properties; and (4) investigate polar cap processes at all seasons. THEMIS follows the Mars Global Surveyor Thermal Emission Spectrometer (TES) and Mars Orbiter Camera (MOC) experiments, providing substantially higher spatial resolution IR multi-spectral images to complement TES hyperspectral (143-band) global mapping, and regional visible imaging at scales intermediate between the Viking and MOC cameras. The THEMIS uses an uncooled microbolometer detector array for the IR focal plane. The optics consists of all-reflective, three-mirror anastigmat telescope with a 12-cm effective aperture and a speed of f/1.6. The IR and visible cameras share the optics and housing, but have independent power and data interfaces to the spacecraft. The IR focal plane has 320 cross-track pixels and 240 down-track pixels covered by 10 ～1-μm-bandwidth strip filters in nine different wavelengths. The visible camera has a 1024×1024 pixel array with 5 filters. The instrument weighs 11.2 kg, is 29 cm by 37 cm by 55 cm in size, and consumes an orbital average power of 14 W.     

A small mission for in situ exploration of a primitive binary near-Earth asteroid

We present a concept for a challenging in situ science mission to a primitive, binary near-Earth asteroid. A sub-400-kg spacecraft would use solar electric propulsion to rendezvous with the C-class binary asteroid (175706) 1996 FG3. A campaign of remote observations of both worlds would be followed by landing on the ∼1 km diameter primary to perform in situ measurements. The total available payload mass would be around 34 kg, allowing a wide range of measurement objectives to be addressed. This mission arose during 2004 from the activities of the ad-hoc Small Bodies Group of the DLR-led Planetary Lander Initiative. Although the particular mission scenario proposed here was not studied further per se, the experience was carried over to subsequent European asteroid mission studies, including first LEONARD and now the Marco Polo near-Earth asteroid sample return proposal for ESA’s Cosmic Vision programme. This paper may thus be of interest as much for insight into the life cycle of mission proposals as for the concept itself.     

Development of a GNSS water vapour tomography system using algebraic reconstruction techniques

A GNSS water vapour tomography system developed to reconstruct spatially resolved humidity fields in the troposphere is described. The tomography system was designed to process the slant path delays of about 270 German GNSS stations in near real-time with a temporal resolution of 30 min, a horizontal resolution of 40 km and a vertical resolution of 500 m or better. After a short introduction to the GPS slant delay processing the framework of the GNSS tomography is described in detail. Different implementations of the iterative algebraic reconstruction techniques (ART) used to invert the linear inverse problem are discussed. It was found that the multiplicative techniques (MART) provide the best results with least processing time, i.e., a tomographic reconstruction of about 26,000 slant delays on a 8280 cell grid can be obtained in less than 10 min. Different iterative reconstruction techniques are compared with respect to their convergence behaviour and some numerical parameters. The inversion can be considerably stabilized by using additional non-GNSS observations and implementing various constraints. Different strategies for initialising the tomography and utilizing extra information are discussed. At last an example of a reconstructed field of the wet refractivity is presented and compared to the corresponding distribution of the integrated water vapour, an analysis of a numerical weather model (COSMO-DE) and some radiosonde profiles.     

Crustal Magnetic Fields of Terrestrial Planets

Magnetic field measurements are very valuable, as they provide constraints on the interior of the telluric planets and Moon. The Earth possesses a planetary scale magnetic field, generated in the conductive and convective outer core. This global magnetic field is superimposed on the magnetic field generated by the rocks of the crust, of induced (i.e. aligned on the current main field) or remanent (i.e. aligned on the past magnetic field). The crustal magnetic field on the Earth is very small scale, reflecting the processes (internal or external) that shaped the Earth. At spacecraft altitude, it reaches an amplitude of about 20 nT. Mars, on the contrary, lacks today a magnetic field of core origin. Instead, there is only a remanent magnetic field, which is one to two orders of magnitude larger than the terrestrial one at spacecraft altitude. The heterogeneous distribution of the Martian magnetic anomalies reflects the processes that built the Martian crust, dominated by igneous and cratering processes. These latter processes seem to be the driving ones in building the lunar magnetic field. As Mars, the Moon has no core-generated magnetic field. Crustal magnetic features are very weak, reaching only 30 nT at 30-km altitude. Their distribution is heterogeneous too, but the most intense anomalies are located at the antipodes of the largest impact basins. The picture is completed with Mercury, which seems to possess an Earth-like, global magnetic field, which however is weaker than expected. Magnetic exploration of Mercury is underway, and will possibly allow the Hermean crustal field to be characterized. This paper presents recent advances in our understanding and interpretation of the crustal magnetic field of the telluric planets and Moon.     

The COMPLEIK subroutine of the IONORT-ISP system for calculating the non-deviative absorption: A comparison with the ICEPAC formula

The present paper proposes to discuss the ionospheric absorption, assuming a quasi-flat layered ionospheric medium, with small horizontal gradients. A recent complex eikonal model (Settimi et al., 2013b) is applied, useful to calculate the absorption due to the ionospheric D-layer, which can be approximately characterized by a linearized analytical profile of complex refractive index, covering a short range of heights between h₁ = 50 km and h₂ = 90 km. Moreover, Settimi et al. (2013c) have already compared the complex eikonal model for the D-layer with the analytical Chapman’s profile of ionospheric electron density; the corresponding absorption coefficient is more accurate than Rawer’s theory (1976) in the range of middle critical frequencies. Finally, in this paper, the simple complex eikonal equations, in quasi-longitudinal (QL) approximation, for calculating the non-deviative absorption coefficient due to the propagation across the D-layer are encoded into a so called COMPLEIK (COMPLex EIKonal) subroutine of the IONORT (IONOspheric Ray-Tracing) program ( Azzarone et al., 2012). The IONORT program, which simulates the three-dimensional (3-D) ray-tracing for high frequencies (HF) waves in the ionosphere, runs on the assimilative ISP (IRI-SIRMUP-P) discrete model over the Mediterranean area ( Pezzopane et al., 2011). As main outcome of the paper, the simple COMPLEIK algorithm is compared to the more elaborate semi-empirical ICEPAC formula (Stewart, undated), which refers to various phenomenological parameters such as the critical frequency of E-layer. COMPLEIK is reliable just like the ICEPAC, with the advantage of being implemented more directly. Indeed, the complex eikonal model depends just on some parameters of the electron density profile, which are numerically calculable, such as the maximum height.     

Heading south with a north-up map: A choice processing analysis of map alignment effects

This study employed an information accumulation model of choice reaction times to investigate alignment effects in mental representations of maps. University students studied a map from a single orientation (with north at the top). In a subsequent two-choice reaction time task, the students’ spatial knowledge of the map was assessed employing spatial left/right judgments, which were made from imagined perspectives that were either north-aligned or south-aligned. Data showed a standard alignment effect, favoring north- over south-aligned trials. To examine the locus of this effect, data were fit using the Linear Ballistic Accumulator (LBA) model of speeded decisions (Brown & Heathcote, 2008). Of interest were three model parameters: drift rate, the speed at which evidence accumulates toward a response; response threshold, the amount of evidence demanded from the decision maker before selecting a response; and non-decision time, the time consumed by pre- and postdecisional processes. The best-fitting model suggested that non-decision time accounted for the alignment effect. The difference in non-decision time between north and south-aligned judgments suggests a mental alignment stage on south-aligned trials, accounting for the longer reaction times for judgements misaligned with the presented north orientation of the map.