BAS—The project of an earth-atmosphere spectrophotometer for basic research

The earth-atmosphere spectrophotometer BAS is intended to be used for basic research in the field of remote sensing. The main advantages of BAS are the possibility of a high-accuracy calibration in absolute units utilizing the extraterrestrial spectral solar energy distribution and its simultaneous use for radiance and for irradiance measurements, e.g. the same spectrophotometer BAS to measure immediately one after the other the high irradiances of the sun (transmission measurement) and very low radiances of water surfaces.Data evaluation will be made immediately by the BAS-linked computer for field measurements.Further important technical parameters of BAS are the scanning of the spectral range 0.38 to 1.12 μm in 40 steps within 3 s, low mass of about 4 kg, power supply by rechargeable battery pack. BAS is also suited for measurements to be made from airborne and shipborne platforms.Different applications are shown by some examples.     

Vehicular Positioning System

There is a US Army vehicular positioning program under way called MAFIS (Mobile Automated Field Instrumentation System). Though its use is intended for full scale battlefield operational testing of mobile ground units and aircraft systems, the implications for extending this technology toward commercial aplications are the thrust of this paper.     

Meteors do not break exogenous organic molecules into high yields of diatomics

Meteoroids that dominate the Earth's extraterrestrial mass influx (50-300 microm size range) may have contributed a unique blend of exogenous organic molecules at the time of the origin of life. Such meteoroids are so large that most of their mass is ablated in the Earth's atmosphere. In the process, organic molecules are decomposed and chemically altered to molecules differently from those delivered to the Earth's surface by smaller (<50 microm) micrometeorites and larger (>10 cm) meteorites. The question addressed here is whether the organic matter in these meteoroids is fully decomposed into atoms or diatomic compounds during ablation. If not, then the ablation products made available for prebiotic organic chemistry, and perhaps early biology, might have retained some memory of their astrophysical nature. To test this hypothesis we searched for CN emission in meteor spectra in an airborne experiment during the 2001 Leonid meteor storm. We found that the meteor's light-emitting air plasma, which included products of meteor ablation, contained less than 1 CN molecule for every 30 meteoric iron atoms. This contrasts sharply with the nitrogen/iron ratio of 1:1.2 in the solid matter of comet 1P/Halley. Unless the nitrogen content or the abundance of complex organic matter in the Leonid parent body, comet 55P/Tempel-Tuttle, differs from that in comet 1P/Halley, it appears that very little of that organic nitrogen decomposes into CN molecules during meteor ablation in the rarefied flow conditions that characterize the atmospheric entry of meteoroids approximately 50 microm-10 cm in size. We propose that the organics of such meteoroids survive instead as larger compounds.     

A critique of reliability prediction techniques for avionics applications

Avionics (aeronautics and aerospace) industries must rely on components and systems of demonstrated high reliability. For this, handbook-based methods have been traditionally used to design for reliability, develop test plans, and define maintenance requirements and sustainment logistics. However, these methods have been criticized as flawed and leading to inaccurate and misleading results. In its recent report on enhancing defense system reliability, the U.S. National Academy of Sciences has recently discredited these methods, judging the Military Handbook (MIL-HDBK-217) and its progeny as invalid and inaccurate. This paper discusses the issues that arise with the use of handbook-based methods in commercial and military avionics applications. Alternative approaches to reliability design (and its demonstration) are also discussed, including similarity analysis, testing, physics-of-failure, and data analytics for prognostics and systems health management.     

Human and robotic repair of a solar array wing during ISS assembly mission 10A

With the installation of a new module and the relocation of three other modules, including multiple hand-offs from the station arm (SSRMS) to the shuttle arm (SRMS), International Space Station (ISS) assembly mission 10A/STS-120 was anticipated to be one of the most complicated ISS assembly missions ever attempted. The assembly operations became even more complex when a solar array wing (SAW) on the relocated Port-6 (P6) truss segment ripped while being extended. Repairing the torn SAW became the single most important objective for the remainder of STS-120, with future ISS assembly missions threatened by reduced power generation capacity if the SAW could not be repaired. Precise coordination between the space shuttle and ISS robotics teams led to an operational concept that combined the capabilities of the SRMS and SSRMS robotic systems in ways far beyond their original design capacities. Benefits of consistent standards for ISS robotic interfaces have been previously identified, but the advantages of having two such versatile and compatible robotic systems have never been quite so spectacular. This paper describes the role of robotics in the emergency SAW repair and highlights how versatility within space robotics systems can allow operations far beyond the intended design scenarios.     

巴西航空工业公司瞄准军用运输机市场

巴西航空工业公司希望于今年底前决定是否开始研制一种军用运输机,以拓展其防务业务。     

Spacecraft Design-for-Demise implementation strategy & decision-making methodology for low earth orbit missions

Space missions designed to completely ablate upon an uncontrolled Earth atmosphere reentry are likely to be simpler and cheaper than those designed to execute controlled reentry. This is because mission risk (unavailability) stemming from controlled reentry subsystem failure(s) is essentially eliminated. NASA has not customarily implemented Design-for-Demise meticulously. NASA has rather approached Design-for-Demise in an ad hoc manner that fails to entrench Design-for-Demise as a mission design driver. Thus, enormous demisability challenges at later formulation stages of missions aspired to be demisable are evident due to these perpetuated oversights in entrenching Design-for-Demise practices. The investigators hence propose a strategy for a consistent integration of Design-for-Demise practices in all phases of a space mission lifecycle. Secondly, an all-inclusive risk-informed, decision-making methodology referred to as Analytic Deliberative Process is proposed. This criterion facilitates in making a choice between an uncontrolled reentry demisable or controlled reentry. The authors finally conceive and synthesize Objectives Hierarchy, Attributes, and Quantitative Performance Measures of the Analytical Deliberative Process for a Design-for-Demise risk-informed decision-making process.