上随体Maxwell(UCM)流体热毛细液层弹性失稳的理论分析

通过对上随体Maxwell（UCM）流体热毛细液层线性稳定性的研究分析,发现流场会发生弹性失稳.扰动的增长速率随波数的增加而增加.与牛顿流体不同,UCM流体不存在临界Marangoni数,当波数达到某一临界值时会出现不稳定的弹性扰动波.该临界波数随弹性数和Marangoni数的增加而减小,当弹性数趋近于0时,流体即变为牛顿流体,而相应的临界波数趋于无穷.不同波数及传播方向上,弹性波的波速相同,而其增长速率在特定方向上达到最大.能量分析表明弹性波的扰动能量来自扰动应力做功.      

动态过程的飞艇排气特性分析

在体积可变的情况下,针对一次排气过程中压差和艇囊体积的动态变化,利用伯努利方程和气体状态方程,揭示了飞艇的排气特性,即压差的平方根随时间线性下降。进而提出一种排气阀效率和艇体变形的实验方法,可在飞艇集成测试中同步完成。试验校验了飞艇的排气特性,且飞艇体积变形率与压差成正比,排气阀效率与标定结果一致。本文的结果可为飞艇总体设计、压力和浮力控制提供参考。     

系列嵌套圆环系统的能量吸收特性

能量吸收结构的性能对航空、航天等领域的人员和结构防护非常重要。针对一种系列嵌套圆环系统的能量吸收特性进行了理论、数值和实验研究。首先建立了考虑应变强化效应的系列嵌套圆环系统受刚性平板横向准静态压缩时的刚塑性理论模型;然后对双环和三环嵌套圆环系统进行了准静态压缩实验及有限元数值模拟,理论预测、数值模拟和实验测得的系列嵌套圆环系统的载荷-挠度曲线吻合很好;最后对将系列嵌套圆环系统应用到航空领域进行了探讨,以应用至航空座椅为例,建立了人体、座椅、能量吸收结构的数学模型,参照美国航空联邦局航空座椅动态实验标准,基于该模型计算得到了人体所受的腰椎负荷,并与不装备能量吸收结构时的腰椎负荷进行了比较,结果表明应用系列嵌套圆环系统可以有效地对人体进行防护。     

薄壁管壳高速正撞击穿孔特性的数值研究

受径向曲率的影响,薄壁管壳遭受高速弹丸撞击产生的局部穿孔毁伤与薄板结构并不相同。本文利用LS-DYNA3D动力学程序,采用光滑粒子流体动力学和有限元法相耦合的方法(SPH-FEM),对球形弹丸高速正撞击不同直径薄壁钢管的穿孔毁伤特性进行数值研究。根据小弹丸高速撞击薄板的物理力学性质,可把穿孔过程简化为初始流动扩孔和随后的惯性扩孔两个阶段,提出一种圆柱管壳高速正撞击穿孔的简化物理模型,并分析圆管直径对轴向孔径和径向孔径尺寸差值比的影响。数值模拟结果表明,撞击速度为2~3 km/s时,薄壁钢管的正撞击穿孔略呈椭圆状,其轴向孔径尺寸稍大于径向孔径尺寸;随着薄壁钢管直径的增加,两个方向的孔径尺寸差值比减小。另外,薄壁钢管遭受小弹丸撞击穿孔后产生碎片云的分布形态受径向直径影响明显,相同撞击条件时,钢管直径越大,则产生碎片云的膨胀角和残余速度也较大。     

A new approach based on crater detection and matching for visual navigation in planetary landing

This paper provides an approach of crater detection and matching to visual navigation in planetary landing missions. The approach aims to detect craters on the planetary surface and match them to a landmark database during the descent phase of a planetary landing mission. Firstly an image region pairing method is proposed to detect the crater by using an image region feature detector. Then a WTA-rule is adopted to match the detected crater to the crater in database. To further reduce the false matching rate, an efficient method for reducing false matches using parameters of crater in 3-D database is proposed. Real images of planetary terrain and a semi-physical planetary landing simulation platform are utilized to test the performance of the approach, simulation results show the proposed approach is able to match the required number of craters to the database for pin-point planetary landing with a low rate of false detection and false matching, which will lead to an improved planetary landing precision.     

Coordinated control of tethered space robot using mobile tether attachment point in approaching phase

Tethered space robots (TSRs) have wide applications in future on-orbit service owing to its flexibility and great workspace. However, the control problem is quite complex and difficult in the phase of approaching target, and the fuel consumption must also be taken into account. Hence, we present a novel scheme of achieving coordinated orbit and attitude control simultaneously for the TSR. Space tether, which can provide greater force compared with the thruster force, is used in the design of the orbit and attitude coordinated controller. A coordinated control mechanism is designed to provide attitude control torques of the pitch and yaw motions by adjusting the position of the mobile tether attachment point, while the roll motion is stabilized by the thruster. In order to guarantee this mechanism to work properly, constant tether tension strategies are utilized to plan an optimal approaching trajectory which is tracked by the coordinated controller of tether force and thruster force. Numerical simulation validates the feasibility of our proposed coordinated control scheme for TSR in the approaching phase. Furthermore, fuel consumption of the orbit and attitude control are both significantly reduced compared with traditional thruster control.     

Design and performances of laser retro-reflector arrays for Beidou navigation satellites and SLR observations

Beidou is the regional satellite navigation system in China, consisting of three kinds of orbiting satellites, MEO, GEO and IGSO, with the orbital altitudes of 21500–36000 km. For improving the accuracy of satellites orbit determination, calibrating microwave measuring techniques and providing better navigation service, all Beidou satellites are equipped with laser retro-reflector arrays (LRAs) to implement high precision laser ranging. The paper presents the design of LRAs for Beidou navigation satellites and the method of inclined installation of LRAs for GEO satellites to increase the effective reflective areas for the regional ground stations. By using the SLR system, the observations for Beidou satellites demonstrated a precision of centimeters. The performances of these LRAs on Beidou satellites are very excellent.     

有限振幅扰动下高超声速钝楔绕流感受性

为了研究自由流脉冲波作用下高超音速流动感受性特征,采用高阶有限差分方法模拟钝楔超高音速绕流中来流慢声脉冲波作用下的非定常流场,并应用傅里叶频谱分析了边界层扰动模态的演化.结果显示,自由流脉冲扰动下,边界层不同模态波沿流线呈现不同变化规律.球头区边界层感受到的主要是基频波,在球头向非球头区过渡段,主导模态迅速向高频迁移;在非球头区,主导模态频率缓慢向高频迁移.总的来说,沿流向总扰动模态中的低频模态成分变小,高频,特别是二阶谐频附近模态成分显著地增大.沿流线发展,边界层不同扰动模态之间存在伴随能量迁移的模态竞争物理现象,主导模态的发展对其他模态有很强的抑制作用.      

Theoretical and Experimental Investigation of Laser Milling Assisted with Jet Electrochemical Machining

In laser milling assisted with jet electrochemical machining （LMAJECM）, the source of energy is a pulsed laser beam aligned coaxially with a jet of electrolyte, which focuses optical energy on the surface of work- piece. The impact of jet of electrolyte develops a state-of-art work to perform operations such as electrolytic etch- ing, effective cooling, and transportation of debris. Therefore, a special jet cell is designed to obtain stable jet as to be a kind of noneontact tool, i. e. , electrode. According to the theoretical model of on-off pulse time process, laser machining and electrolytic anodization are simulated by finite element analysis （FEA） method. Grooves on a 0.5 mm thick 321 stainless steel sheet produced by LMAJECM is performed with pulsed Nd：YAG laser at the second harmonic wavelength. Compared with laser milling under ambient atmosphere conditions, the recast layer and burrs are effectively diminished. And the accuracy of depth is dedicated to laser milling, whilst that of width is dominated by jet electrochemical machining. It is demonstrated that LMAJECM can be a highly potential approach for fabricating 3-D micro components.     

冬季桃仙机场持续大雾天气成因分析与应急服务

利用常规观测资料,对2011年11月26-28日沈阳桃仙机场出现持续大雾天气进行客观分析与应急服务总结。结果表明:此次大雾的天气过程具有混合型的特点,雾的性质随着时空变化而转变,由锋面雾、辐射雾和平流雾交替转换。其中,冬季桃仙机场"口袋型"地势与地面风配合有利于大雾的形成与维持;850-700hPa之间弱的正散度区,促进了上升运动区与下沉运动区的界面中的逆温层的维持;后续925 hPa低空湍流的发展对大雾消散起到了关键作用。