重根特征向量导数计算的特殊迭代法

在重根特征向量导数计算方法的发展中，为了从无限个特解中确定出唯一的通解，提出过不同定解条件，但正确定解条件是唯一的。员后公认的定解条件为Z^TMZ Z^TMZ=-Z^TMZ,这里认为Z^TMZ≠Z^TMZ，由此便引出物理短阵(刚度阵和质量阵)的二阶导数。为了避免物理阵二阶导数的计算，本文在满足前述定解条件的前提下，利用一种特殊的迭代格式回避了物理阵二阶导数的引入。同时该迭代过程可直接获得通解，不同于目前流行的做法：先由一个不定支配方程求其特解，然后才由定解条件确定通解。另外，数值表明，动柔度迭代式的精度可与直接迭代式相匹敌，可是动柔度迭代式用于许多特征向量导数计算时，却省时得多。     

高焓风洞中钝体近尾流红外辐射测试技术

介绍在JF-10氢氧爆轰驱动高焓激波风洞中开展再人流场红外辐射测量的实验技术。风洞试验状态的驻室总压为19．6MPa，驻室总温为7920K。实验以球头钝锥体为试验模型，测量其近尾流红外辐射能量通量的横向分布。测量采用插入式锑化铟多元红外成像系统，波段范围为2．27-6．0μm。试验数据呈现明显的规律性。试验结果表明：利用这一测量技术能够提供高焓条件下有较高空间分辨率的、较为准确的红外实验数据。     

Models of P/Borrelly: Activity and dust mantle formation

Comet 19P/Borrelly was observed by Deep Space One spacecraft on September 22, 2001 (Soderblom et al., 2002).The DS1 images show a very dark and elongate nucleus with a complex topography; the IR spectra show a strong red-ward slope consistent with a very hot and dry surface (345K to 300K). During DS1 encounter the comet coma was dominated by a prominent jet but most of the comet was inactive, confirming the Earth-based observations that <10% of the surface is actively sublimating. We have developed a thermal evolution model of comet PBorrelly, using a numerical code that is able to solve the heat conduction and gas diffusion equations at the same time across an idealized spherical nucleus ( De Sanctis et al., 1999, 2000; Capria et al., 2000; Coradini et al., 1997a,b). The comet nucleus is composed by water, volatiles ices and dust in different proportions. The refractory component is made by grains that are embedded in the icy matrix. The code is able to account for the dust release, contributing to the dust flux, and the formation of dust mantles on the comet surface. The model was applied to a cometary nucleus with the estimated physical and dynamical characteristics of P/Borrelly in order to infer the status and activity level of a body on such an orbit during the DS1 observation. The comet gas flux, differentiation and thermal behavior were simulated and reproduced. The model results are in good agreement with the DS1 flyby results and the ground based observations, in terms of activity, dust coverage and temperatures of the surface.     

基于试验气动力的纵向机动飞行载荷分析

提出了一种基于非线性风洞试验数据(简称试验气动力)同步进行纵向机动飞行过程和飞行载荷的计算分析方法.通过曲面样条插值将试验气动力的升力系数和俯仰力矩系数引入纵向机动飞行过程的计算,同时基于试验气动力的压力分布进行全机飞行载荷的静气动弹性修正.弹性载荷的计算采用线性气动力影响系数矩阵处理.采用偶极子格网法提供气动力(简称理论气动力).将基于这两种气动力的计算结果进行了对比.结果表明:基于试验气动力的机动飞行过程更为合理;基于理论气动力的载荷随机动飞行过程的变化趋势有可能与基于试验气动力的载荷变化趋势不一致.      

Countermeasure Against Regenerative and Forced Chatter of Flexible Workpieces in Milling Processs Using Bi-directional Excitation

A novel extended methodology for chatter suppression in milling process by applying external forced vibrations to the workpiece in two orthogonal directions which are the feed and cross-feed directions.Both the regenerative and forced chatter suppression during the milling process of flexible workpieces are investigated.Here,the workpiece is subject to a sinusoidal periodic force in the feed direction to disrupt the regenerative effect.Additionally,to minimize the forced chatter,the workpiece is subject to the periodic excitation force in cross-feed direction.This force is proportional to the magnitude of the estimated cutting force in cross-feed direction and has a phase opposite to the cutting force to minimize the vibration amplitudes.The effectiveness of the proposed method is evaluated numerically and experimentally,for the spindle speed located in both the local minima and local maxima of the stability lobe diagram.The numerical simulations indicate significant suppression effect in terms of vibration amplitudes,resulting in suppression of both the regenerative chatter and the forced chatter.Experiments were conducted by using a workpiece-mounted active stage composed of flexure hinges and driven by piezoelectric actuators.The experimental results agree qualitatively with the numerical simulations.The proposed method indicates a remarkable vibration reduction effect for both regenerative and forced chatters.     

天基监视雷达的距离游走和距离重叠补偿研究

为了实现天基雷达杂波消除、高分辨率的角度估计和广域监视功能,采用三通道相位中心偏置天线（DPCA）/monopulse（单脉冲）信号处理系统。天基雷达的运动和地球自转,使得地球上每一点的杂波都产生了附加的多普勒成分——距离游走效应。距离游走与距离重叠效应相结合,显著地降低DPCA处理算法的杂波抑制性能。针对距离游走效应在相干处理阶段进行反向补偿、在非相干积累阶段采用线性内插的方法进行校正,针对距离重叠效应采用基于普罗米修斯结构的波形分集技术进行校正。实验结果显示,提出的距离游走和距离重叠综合补偿方案显著提高杂波抑制效果。
     

Deorbiting with electrodynamic tethers: comparison between different tether configurations

Electrodynamic tethers have been recently proposed for satellite and rocket upper stage deorbiting to mitigate the debris problem at Low Earth Orbits (LEOs). The deorbiting performance of several electrodynamic tethers, where the electron collection from the ionosphere is obtained with either simple bare wires or bare wires terminated with conducting spherical collectors, was analyzed and compared. Our results indicate that the use of the spherical collectors at the positive termination of the system significantly enhances the deorbiting capabilities of the electrodynamic bare tethers.     

束丝SiC纤维增强铝复合材料界面TEM研究

利用透射电镜 (TEM )对由几种不同方法制备的束丝SiC纤维增强铝复合材料 (包括超声液相浸渗法制备的复合丝、由复合丝热压得到的板材以及由真空液相压渗法制备的板材等 )的界面微观特征进行了研究 ,结果显示 ,制造态及 5 5 0℃× 1h热暴露条件下复合材料没有发生界面反应 ,在 6 5 0℃× 1h热暴露条件下有厚度 10 0～2 0 0nm的界面反应区。该研究表明 ,SiC/Al复合材料在制备工艺条件下具有有良好的界面化学相容性     

航空结构动力分析系统HAJIF-Ⅱ

HAJIF-Ⅱ是中国航空研究院领导研制的航空结构动力分析系统。它可以进行结构的固有动力特性计算,以及带主动控制系统的飞机颤振计算和突风响应计算。它具有31条固定流程、2600条FORTRAN语句。允许使用99个原级子结构,每个子结构的自由度数可达7000。颤振计算和突风响应计算中,可以使用50个形态。非定常空气动力计算的分块数可达300个。在刚度矩阵和质量矩阵的管理上,采用超元矩阵方法做“宏观处理”,并用有效列方法做“微观处理”,发展了新的同时迭代算法,以提高实特征值计算的效率。设计了比较完整的形态综合法计算程序,除固定界面法和自由界面法之外,还发展了分级综合和逐步综合的新方法。非定常空气动力计算方面,引入了用曲线拟合方法把谐振荡空气动力转入拉氏平面的技术。用本系统计算了一批典型的结构,取得了良好结果。     

缩尺模拟板相关性研究

介绍了模拟板由小模型到大模型的研制过程，着重讨论了模拟板小模型与大模型在流场总压恢复系数、周向不均匀度、低压区范围等方面的相关性问题。研究结果表明由小模型到大模型的研制方案是正确可行的。