表贴塑封器件的老炼方法初步研究

目前在高可靠性应用领域里已开始有限地选用工业级表贴塑封器件。为提高整机的可靠性,需要对表贴塑封器件进行可靠性筛选,而老炼是其中至关重要的环节。相比比较成熟的直插器件的老炼方法而言,表贴塑封器件老炼尚有一些问题需要进一步研究与探讨。文章对表贴塑封器件与直插器件老炼过程中的结温控制方法进行了比较与分析,指出了两者结温控制的主要区别。基于此,提出基于等效热阻估算及结合器件壳温控制结温的表贴塑封器件老炼试验方法,对包括SC-75、UCSP等封装的元器件进行了老炼试验和测试。筛选后的元器件已应用于工程实践,并通过了一系列的试验考核。     

TiAl金属间化合物缺口断裂性能

 TiAl合金作为准脆性材料,在其服役过程中由于缺口的存在使得断裂对缺口非常敏感,严重降低了其使用性能,因此需要研究TiAl合金在缺口作用下的断裂性能。采用带缺口的组合拉伸试样研究了温度和拉伸速率对具有近全片层组织Ti-48Al-2Cr-2Nb合金缺口断裂性能的影响。结果表明,室温下TiAl合金对缺口非常敏感,随着温度的升高,TiAl合金对缺口敏感性降低,当温度为800 ℃时,TiAl合金对缺口不敏感。TiAl合金在低温区塑性变形是通过位错滑移和变形孪晶引起的,高温下是由扩散控制的位错攀移作用引起的。研究还表明,200 ℃下拉伸速率较低时TiAl合金对缺口不敏感,当拉伸速率增加到较高时,TiAl合金对缺口很敏感。     

试样几何形状和尺寸对C/C复合材料拉伸强度的影响

为了确定C/C复合材料的高温拉伸试样的尺寸和形状,对7种C/C复合材料拉伸试样的室温拉伸强度进行研究。结果表明,为悬挂引伸计传感器而加工的凸台的形状对材料的拉伸强度有明显影响。方形、三角形凸台试样的几何应力集中因子分别为2.41和1.01。拉伸强度与凸台形状密切相关,拉伸强度随着标距宽度和长度的增加呈下降趋势,符合尺寸效应规律,标距长度在30~40 mm变化时,拉伸强度基本不变。     

7A04铝合金壳体阳极氧化表面黑斑成因分析

7A04壳体零件表面阳极氧化处理后,模锻表面存在黑斑现象。本文采用S-3700N扫描电子显微镜(SEM)、能谱分析仪(EDS)等对表面黑斑进行成因分析。结果表明:模锻表面粗糙,存在大量凹坑,模锻过程中的润滑剂或氧化皮等外来物残留于凹坑处,影响阳极氧化膜层的生成而形成表面黑斑;黑斑底部阳极氧化膜层均连续,厚度比正常区域薄,仍可以起到一定的防护作用。在系统分析基础上,提出通过严格控制表面质量和模锻工艺,可以避免此类问题的产生。     

技术成熟度评价方法及其在交会对接任务中的应用

介绍了技术成熟度等级和评价的概念,简述了技术成熟度评价在国外航天工程中的应用情况,提出了航天工程技术成熟度评价标准,包括开展技术成熟度评价的目的、技术成熟度的详细定义及其内涵,并以技术成熟度等级五级为例,给出了具有可操作性的评价细则以及实施要点,通过交会对接任务中运载火箭评价应用实例对技术成熟度评价的应用进行了说明。     

民用飞机应急处理分析流程研究

民用飞机在飞行过程中必然会遇到一些难以预料的情况,如何使空中和地面的工作人员能快速有效地处理飞机在飞行过程中出现的突发事件,已成为世界各国航空运输业关注的重点。为了在突发事件发生后能最大限度地保障乘客和飞机的安全,介绍了空乘及地面工作人员在突发事件发生后的应急处理流程。     

Demonstration of a high sensitivity GNSS software receiver for indoor positioning

Advances in signal processing techniques contributed to the significant improvements of GNSS receiver performance in dense multipath environments and created the opportunities for a new category of high-sensitivity GNSS (HS-GNSS) receivers that can provide GNSS location services in indoor environments. The difficulties in improving the availability, reliability, and accuracy of these indoor capable GNSS receivers exceed those of the receivers designed for the most hostile urban canyon environments. The authors of this paper identified the vector tracking schemes, signal propagation statistics, and parallel processing techniques that are critical to a robust HS-GNSS receiver for indoor environments and successfully incorporated them into a fully functional high-sensitivity software receiver. A flexible vector-based receiver architecture is introduced to combine these key indoor signal processing technologies into GSNRx-hs™ – the high sensitivity software navigation receiver developed at the University of Calgary. The resulting receiver can perform multi-mode vector tracking in indoor environment at various levels of location and timing uncertainties. In addition to the obvious improvements in time-to-first-fix (TTFF) and signal sensitivity, the field test results in indoor environments surrounded by wood, glass, and concrete showed that the new techniques effectively improved the performance of indoor GNSS positioning. With fine GNSS timing, the proposed receiver can consistently deliver indoor navigation solution with the horizontal accuracy of 2–15 m depending on the satellite geometry and the indoor environments. If only the coarse GNSS timing is available, the horizontal accuracy of the indoor navigation solution from the proposed receiver is around 30 m depending on the coarse timing accuracy, the satellite geometry, and the indoor environments. From the preliminary field test results, it has been observed that the signal processing sensitivity is the dominant factor on the availability of the indoor navigation solution, while the GNSS timing accuracy is the dominant factor on the accuracy of the indoor navigation solution.     

利用CFD技术计算飞行器动导数

利用非定常流场数值计算方法模拟飞行器强迫俯仰振荡仅能得到俯仰力矩系数对迎角变化率和俯仰角速度的动导数之和,而动稳定性分析需要单独的动导数数值.为解决这个问题,利用滑移网格模拟强迫振荡运动,得到俯仰力矩系数对迎角变化率和俯仰角速度的动导数之和.利用旋转参考坐标系模拟定常拉升,得到俯仰力矩系数对俯仰角速度的动导数.利用旋转参考坐标系模拟匀速滚转,得到滚转力矩系数对滚转角速度的动导数.对有翼导弹和水上飞机进行了纵向和横向动导数的计算.计算结果与试验数据、文献数据以及其他方法得到的结果具有较好的一致性,表明提出的方法可用于复杂外形飞行器动导数计算.     

Recent Developments on Damage and Fracture of Thin-Walled Complex Components Produced by Spinning

The spinning technique has been widely used in the manufacture of aerospace thin-walled axisymmetric components because of its excellent formability. Damage and fracture, as the important defects that often occur and must be avoided in the forming and service stages of components, have attracted much attention of researchers. In this paper, the fracture behavior and laws of spinning components such as conical parts, tubular parts, and components with inner ribs are summarized, the typical coupled and uncoupled ductile fracture models are introduced, and their applications in spinning are analyzed. Meanwhile, the recent developments on the modified ductile fracture model in analyzing damage and fracture mechanisms of spinning are emphatically introduced. The results could provide guidance for the selection and establishment of appropriate ductile fracture models in the finite element simulation for the accurate prediction and analysis of fracture moment, location, form, damage mechanism, and evolution law, and help the development of precision spinning techniques for high-performance thin-walled complex components.     

高速气流场燃油雾化液滴分布数值研究

针对亚燃冲压发动机燃烧室内部流动特点,结合二元稳定器试验台高速气流场燃油雾化特性试验,建立试验件三维模型并对其喷雾两相流动进行数值模拟。主要研究了来流马赫数以及喷嘴条件变化时燃油雾化液滴与油气比的分布。分析认为,来流马赫数的增加使得雾化特征角缩小,可同时改善燃油蒸发并获得更加均匀的油气比分布。随着供油压力的提高,离心式与直流式喷嘴雾化特征角均增大,但供油压力不是影响直流喷嘴雾化锥角的主要因素。计算结果与试验结果对比定性符合良好,定量误差范围可以接受,验证了计算模型与计算方法的正确性,所得到的结果可应用于工程设计。