Ariane transfer vehicle in service of man in orbit

The Ariane transfer vehicle (ATV), an Ariane 5 borne, unmanned propulsion vehicle, is designed to transport the logistics needed to resupply the International Space Station (ISS) and the man tended free flyer (MTFF) step 2 with pressurized and unpressurized cargo and to dispose the waste. The ATV is an expendable vehicle and is disposed of by a safe atmospheric burn up. In accordance with the AR5 schedule it should be operational in 1996 for missions toward ISS and beyond the year 2000 for MTFF 2 missions. The main constituents of the proposed ATV are the modified AR5 third stage L5, an upgraded VEB steering the launcher as well as the ATV and the P/L-adaptor providing mechanical and umbilical links to the payload. The mechanical part of the RVD-kit will be placed on the payload-module, the main RVD sensors are located on the adaptor and the needed computer intelligence will be integrated on the VEB. To minimize the development, and recurring costs, the ATV concept fully complies to the idea of maximum use of existing hardware and software, mainly from the AR5, Hermes and Columbus programs thus minimizing development and recurring costs. The ATV is compatible to ISS, MTFF and OMV and is able to transport logistic modules compatible with NSTS and U.S.-expendable launchers.     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.     

按降低轨迹灵敏度综合最优设计飞行控制系统

本文提出了一个按降低轨迹灵敏度综合最优设计飞行控制系统的方法。它能使系统具有满意的动态品质,同时对系统参数的变化及非线性产生的影响具有较强的鲁棒性。该设计方法具有通用性和程序化,系统实现简单。     

空间机械臂非完整运动规划的遗传算法研究

带空间机械臂航天器系统在无外力矩作用时，系统相对于总质心的动量矩守恒而变为非完整系统。由于非完整约束的不可积性，非完整系统的运动规划与控制比一般系统要困难得多。现利用非完整特性研究了自由漂浮空间机械臂的三维姿态运动控制问题。首先导出带空间机械臂的航天器三维姿态运动数学模型，并将系统的控制问题转化为无漂移系统的非完整运动规划问题。在运动规划中，根据最优控制原理和优化理论，提出基于遗传算法的最优运动规划数值算法。通过数值仿真，表明该方法对空间机械臂及航天器三维姿态运动的非完整运动规划是有效的。     

RBCC发动机性能分析方法研究

通过进行前体的边界层效应修正、采用有限化学反应速率模型和中心差分形式的Mac Cormack格式,求解燃烧室性能分析模型方程,以及采用灵活的发动机性能计算方法等,建立了较为完善的RBCC发动机性能分析模型及软件,并进行了软件应用研究。分别采用二维CFD计算和试验结果对该模型进行了校验,其相对误差小于10%。结果表明,该软件适用于RBCC发动机性能分析。     

卫星ATM网络中跨层设计的星上缓存管理优化方案

为提高卫星ATM(异步传递方式)网络星上缓存资源的利用率,针对利用上层协议重传的非实时数据业务,采用跨层设计方法提出了一种缓存管理优化方案—错误信元尾丢弃(ECTD)。它把信道误码引起的错误信元及后续的属于同一协议数据单元的无效信元丢弃。以早分组丢弃为基础,进一步建立了采用ECTD和不采用ECTD的分析有效吞吐量的数学模型。数值分析结果表明,ECTD具有优化缓存管理、提高有效吞吐量的作用,而且信元错误率和协议数据单元的长度越大,ECTD对有效吞吐量的改善就越明显。     

关于高校档案工作实行规范化建设的思考

论文针对高等教育事业迅速发展的现状,结合高校档案管理自动化和档案信息化的要求,分析了现有的《高等学校档案实体分类法》和《高等学校档案工作规范》所确定的归档范围、保管期限、分类体系以及整理规则不相适应的地方,提出了实现高校档案实体分类及有关业务环节的标准化、规范化的新思路。     

激波在狭缝中绕射过程研究

针对固体火箭发动机药柱存在裂纹的情况，对运动激波在狭缝中绕射传播的非定常流场进行了计算，得到了清晰的流场变化图谱，从流场图中可分辨出激波在狭缝中的传播过程。对不同深宽比的狭缝进行研究，发现流场结构存在明显差别，在深宽比较小时狭缝内压力波振荡较小，当深宽比超过一定值时狭缝内的压力波产生剧烈振荡。研究结果表明，该方法可很好地描述激波在狭缝中的传播过程。     

基于RBF网络的惯导系统初始对准

建立了惯导系统（ＩＮＳ）初始对准的线性和非线性误差模型。分析了径向基函数（ＲＢＦ）网络的结构和工作原理。研究了ＲＢＦ网代替初始对准中的卡尔曼滤波器的实现方法。通过仿真表明，用神经网络进行初始对准，既可获得与卡尔曼滤波相同的对准精度，又提高了系统的实时性。