某飞行器推力矢量试验测力装置研制

为满足某飞行器推力矢量试验的测试要求,采用两台六分量应变天平和一个空气桥组成测力装置来实现飞机全机气动力和喷管推进特性同时分别测量。基于有限元软件,对天平的应变及空气桥对天平的干扰进行了分析。结果表明:空气桥对天平力分量的干扰值优于5%,对力矩(滚转力矩除外)分量的干扰值优于15%,达到了设计指标。通过校准获得了单独天平、天平带空气桥(充压、不充压)状态下的校准公式,校准结果表明:两台天平各分量的综合加载误差均优于0.3%,天平带空气桥(充压、不充压)状态下各分量的综合加载误差优于0.5%,空气桥对天平的干扰量值与有限元分析结果一致。理论分析与实测结果证明:研制的天平及空气桥达到了预定目标,它的测量精准度高,满足推力矢量风洞试验需求。     

电子阻尼的增进——局部激励应变的补偿

分析了以压电陶瓷片为作动和测量元件,构成速度负反馈的闭环控制的“电子阻尼技术”之所以不能大幅度增加结构阻尼的原因。提出了“局部激励应变补偿”和把通常的微分负反馈改为低截止频率的惯性环节正反馈的控制新方案。压电悬臂梁的实验表明,它们能使结构模态阻尼比大幅提高。     

复杂产品研制项目标准化效益评估模型

旨在量化计算标准化工作的效益,凸显标准化工作的重要作用.通过分析复杂产品研制项目标准化工作的特点,确定标准化工作权重计算方法,建立了复杂产品研制项目标准化工作项目体系及效益指标体系.深入研究复杂产品研制项目标准化效益评估模型的构建方法,编制总效益调研问卷,收集有关型号标准化工作效果数据,构建了复杂产品研制项目标准化效益评估模型.运用本方法建立了航空领域复杂产品研制项目标准化效益评估模型,并以某型飞机研制项目的真实数据验证了模型的准确度.     

基于高分卫星姿态监测的姿态参数算法优化

目前航天测绘相机几何参数的在轨标定通常经由地面检校场数据处理完成。然而,由于一次摄影中难以保证获取的地面检校场影像完整,使得在轨标定周期较长,进而导致实时监测与标定非常困难。“高分十四号”卫星搭载了一种新的姿态测定系统,利用高精度的相机光轴监测实现对相机几何参数的在轨实时标定。文章在此基础上对高分卫星星地相机间夹角在轨解算方案进行了优化,并基于数值仿真和在轨实测数据进行了分析,结果显示优化算法可以进一步提高影像内定向稳定度和最终的定位精度,未来有望在高精度立体测绘应用中发挥重要作用。     

Space Weather Service for Chinese Space Science Satellites

Strategic Priority Research Program on Space Science has gained remarkable achievements. Space Environment Prediction Center (SEPC) affiliated with the National Space Science Center (NSSC) has been providing space weather services and helps secure space missions. Presently, SEPC is capable to offer a variety of space weather services covering many phases of space science missions including planning, design, launch, and orbital operation. The service packages consist of space weather forecasts, warnings, and effect analysis that can be utilized to avoid potential space weather hazard or reduce the damage caused by space storms, space radiation exposure for example. Extensive solar storms that occurred over Chinese Ghost Festival (CGF) in September 2017 led to a large enhancement of the solar energetic particle flux at 1 AU, which affected the near Earth radiation environment and brought great threat to orbiting satellites. Based on the space weather service by SEPC, satellite ground support groups collaborating with the space Tracking, Telemetering and Command system (TT&C) team were able to take immediate measures to react to the CGF solar storm event.      

Method for designing constant thrust power schedule

In order to make the power level angle (PLA) have the same bijection relationship with the thrust when the environment changes before operational limit exceedance, and ensure the pilots ability of unrestricted throttle movement as well as the safety of the engine, a method used to design a constant thrust power schedule was proposed. The research was based on a simulink turbofan engine model and the results were organized as look-up tables in different structures with limitations. Simulation was done to confirm the validity and demonstrate the effectiveness of the schedule obtained with the approach. The constant thrust takeoff schedule, constant thrust idle schedule and constant thrust part power schedule with the present constant thrust control (CTC) method were proved to be valid. The results can be applied to this specific engine but the method can be applied to any areoengine and can be even extended to the unmanned plane.      

Long-term evolution of Galileo operational orbits by canonical perturbation theory

Galileo operational orbits are slightly affected by the 3 to 5 tesseral resonance, an effect that can be much more important in the case of disposal orbits. Proceeding by canonical perturbation theory we show that the part of the long-term Hamiltonian corresponding to the non-centralities of the Earth's gravitational potential can be replaced by an intermediary that shows the pendulum dynamics of the 3 to 5 tesseral resonance problem. Inclusion of lunisolar perturbations requires a semi-analytical integration, which is compared with the corresponding results from the well-established Draper Semi-analytical Satellite Theory.     

双独立闭环复合液压伺服控制体系的分析

针对现有几种液压伺服控制系统的优缺点,基于高性能和节能这一发展趋势,提出基于伺服电机、定量泵、蓄能器和伺服阀的双独立闭环的新型复合控制体系.分析了其结构特点,建立了数学模型并进行了仿真分析和实验验证,证明新型控制体系充分发挥了各个控制环节的效能,实现了流量适应,较现有的控制方案简单可靠,在综合指标方面有了很大的提高,适合机载液压系统和弹载液压系统.      

Watershed image segmentation and cloud classification from multispectral MSG-SEVIRI imagery

In this work a technique for cloud detection and classification from MSG-SEVIRI (Meteosat Second Generation-Spinning Enhanced Visible and Infra-red Imager) imagery is presented. It is based on the segmentation of the multispectral images using order-invariant watershed algorithms, which are applied to the corresponding gradient images, computed by a multi-dimensional morphological operator. To reduce the over-segmentation produced by the watershed method, a RAG (Region Adjacency Graph) based region merging technique is applied, using region dissimilarity functions. Once the objects present in the image have been segmented, they are classified using a multi-threshold method based on physical considerations that takes into account the statistical parameters inside each region.