基于Ansys Icepak 的负载器热设计与热分析

基于热设计的基础理论与负载器的工作原理,应用Ansys Icepak仿真软件对供配电负载器工作过程中内部散热情况进行仿真,找出负载器内部温度最高部位,指导实际测试,避免实际测试的盲目性。另外,通过优化负载器散热孔设计,降低负载器温升值。     

超临界CO2技术对空心/实心石英混编纤维表面改性

采用热处理+溶剂浸洗+超临界CO2技术对空心/实心石英混编纤维表面进行预处理,同时利用超临界流体的携带与渗透作用,将KH-560偶联剂引入纤维表面进行改性。采用接触角测试、表/界面张力测试、树脂吸附量测试、力学性能测试、扫描电镜等分别测试纤维表面能、胶液表面张力与接触角、胶液与纤维浸润性,观察纤维表面形貌结构,分析复合材料的力学与介电性能。结果表明:采用热处理+溶剂浸洗+超临界CO2技术可有效去除空心/实心石英混编纤维表面浸润剂,提高纤维表面能,促进胶液与纤维的完全浸润,最终改善复合材料力学与介电性能。     

GRACE gravity field modeling with an investigation on correlation between nuisance parameters and gravity field coefficients

The GRACE (Gravity Recovery And Climate Experiment) monthly gravity models have been independently produced and published by several research institutions, such as Center for Space Research (CSR), GeoForschungsZentrum (GFZ), Jet Propulsion Laboratory (JPL), Centre National d’Etudes Spatiales (CNES) and Delft Institute of Earth Observation and Space Systems (DEOS). According to their processing standards, above institutions use the traditional variational approach except that the DEOS exploits the acceleration approach. The background force models employed are rather similar. The produced gravity field models generally agree with one another in the spatial pattern. However, there are some discrepancies in the gravity signal amplitude between solutions produced by different institutions. In particular, 10%–30% signal amplitude differences in some river basins can be observed. In this paper, we implemented a variant of the traditional variational approach and computed two sets of monthly gravity field solutions using the data from January 2005 to December 2006. The input data are K-band range-rates (KBRR) and kinematic orbits of GRACE satellites. The main difference in the production of our two types of models is how to deal with nuisance parameters. This type of parameters is necessary to absorb low-frequency errors in the data, which are mainly the aliasing and instrument errors. One way is to remove the nuisance parameters before estimating the geopotential coefficients, called NPARB approach in the paper. The other way is to estimate the nuisance parameters and geopotential coefficients simultaneously, called NPESS approach. These two types of solutions mainly differ in geopotential coefficients from degree 2 to 5. This can be explained by the fact that the nuisance parameters and the gravity field coefficients are highly correlated, particularly at low degrees. We compare these solutions with the official and published ones by means of spectral analysis. It is found that our solutions are, in general, consistent with others in the spatial pattern. The water storage variations of the Amazon, Chari and Ganges river basins have also been computed. The variations computed with the NPARB approach are closer to those produced by JPL and DEOS solutions, while the variations produced with the NPESS approach are in good agreement with those produced by the CSR and GFZ solutions. A simulation study is implemented with considering realistic noise and low-frequency error. The two approaches are used to recover the true model. The NPESS solution appears closer to the true one. Therefore we are inclined to estimate the nuisance parameters simultaneously with the geopential coefficients.     

可靠性设计优化的球空间设计法

可靠性设计优化（RBDO）在航空航天等领域已经被广泛应用,具有显著提高可靠性的效果;然而它包含两个迭代循环-总体优化循环和可靠性分析循环,双循环求解方法效率低下甚至难以承受。本文提出一种可以提高可靠性设计优化求解效率的方法-球空间设计法,该方法可以方便地表达搜索区域,最大可能失效点可以从极值点处精确获取;同时,该方法可以将总体优化以及可靠性分析同步进行。本文所提出的球空间法的有效性将通过2个算例进行测试,测试结果表明该方法不仅精度与同类方法持平,求解效率有明显提升,它将会对提高航空航天装备如卫星、火箭、飞行器等产品的可靠性提供更为有效的方法和技术支持。     

卫星介质深层充电电场时域差分计算方法研究

根据卫星介质深层充电的物理机制,分别对应介质板正面接地、背面接地和正面背面同时接地三种情况建立相应的介质板深层充电模型,研究了利用时域差分和数值积分方法求解卫星介质深层充电电场的算法,计算了在单能电子束流垂直入射作用下卫星内部介质板(Teflon)深层充电电场,计算结果表明,文章建立的数值计算方法能求解出介质深层充电电场,且计算结果能反映充电电场在介质板中的时空分布特征.     

轴对称突扩直管流场计算

本文是为喷管喉部沉积问题的研究而进行的喷管突扩流场研究工作的一部分,重点研究了产生突扩流效应的轴对称直管流场.在等粘度和k-ε紊流模型下,分别计算了三种速度分布下的流场,和国内外相关实验结果及Spalding,D.B.的计算结果进行比较,取得了满意的结果.同时考察了动边界下流场的变化,实现了突扩流效应的理论预测.本文考察了SIMPLE方法.在源项处理、方程的非线性、方程的解法等方面做了分析研究和计算工作,解决了一些具体应用问题.     

应用端弯叶片增加压气机喘振裕度

本文介绍了某型高压压气机考虑端壁附面层影响改进设计的端弯叶片,试验证明:喘振裕度增加7.3％,效率提高4.1％,流量、压比变化很小。飞行试验证明:解决了空中停车问题,在飞行包线内能保证可靠稳定工作,发动机和飞机性能都有较大的提高。     

高硅氧增强塑料烧蚀模型中热解层厚度的探讨

通过小型实验固体火箭发动机的多次热试车,对喷管扩散段截面上高硅氧酚醛材料的色变厚度进行了观察,对该截面上材料采用红外光谱成份分析和导电性测量,确认了热解层厚度与碳化层厚度具有相同的数量级,可达2.5mm左右.因此,在作高硅氧酚醛喷管材料的烧蚀与温度场计算时,不宜采用热解面模型,而应采用热解层模型.     

粘性跨音速喷管流场计算

本文继用隐式近似因子分解法成功地计算无粘跨音速喷管流场之后,用同样的方法,结合任意曲线坐标系,通过非定常方程在相当长时间后的定常解,针对矩形截面喷管和轴对称喷管粘性跨音速流场,求解了可压缩层流薄层N-S方程,获得了核心流,特别是边界层中的流动参数.对于矩形截面和轴对称两种喷管进行了计算,其结果和实验数据相当一致.将本文的方法应用到粘性两相流动计算,可望较多的节省机时.     

EB-PVD制备箔材的厚度均匀性研究

从真空蒸镀中使用的小平面蒸发源理论出发,针对电子束物理气相沉积中为改善箔材厚度分布所须旋转大基板进行蒸镀的情况,建立了该过程的数学模型;并利用该模型对不同的坩埚位置所沉积的箔材厚度进行了定性分析,从而实现了对坩埚与基板相对位置的优化,使基板上沉积的箔材厚度分布可以达到最均匀的状态.最后通过K值的提出使理论和实际箔材厚度的结果趋于一致,即证明所建立的数学模型是合理的.