Emission heights of coronal bright points on Fe XII radiance map

The study of coronal bright points (BPs) is important for understanding coronal heating and the origin of the solar wind. Previous studies indicated that coronal BPs have a highly significant tendency to coincide with magnetic neutral lines in the photosphere. Here we further studied the emission heights of the BPs above the photosphere in the bipolar magnetic loops that are apparently associated with them. As BPs are seen in projection against the disk their true emission heights are unknown. The correlation of the BP locations on the Fe XII radiance map from EIT with the magnetic field features (in particular neutral lines) was investigated in detail. The coronal magnetic field was determined by an extrapolation of the photospheric field (derived from 2-D magnetograms obtained from the Kitt Peak observatory) to different altitudes above the disk. It was found that most BPs sit on or near a photospheric neutral line, but that the emission occurs at a height of about 5 Mm. Some BPs, while being seen in projection, still seem to coincide with neutral lines, although their emission takes place at heights of more than 10 Mm. Such coincidences almost disappear for emissions above 20 Mm. We also projected the upper segments of the 3-D magnetic field lines above different heights, respectively, on to the tangent x–y plane, where x is in the east–west and y in the south–north direction. The shape of each BP was compared with the respective field-line segment nearby. This comparison suggests that most coronal BPs are actually located on the top of their associated magnetic loops. Finally, we calculated for each selected BP region the correlation coefficient between the Fe XII intensity enhancement and the horizontal component of the extrapolated magnetic field vector at the same x–y position in planes of different heights, respectively. We found that for almost all the BP regions we studied the correlation coefficient, with increasing height, increases to a maximal value and then decreases again. The height corresponding to this maximum was defined as the correlation height, which for most bright points was found to range below 20 Mm.     

结构光三维视觉及其在工业中的应用

介绍结构了光三维视觉原理及实现方法，讨论了结构光三维视觉在工业视觉检测和机器人的导引中的应用，所列实例体现了结构光视觉应用的最新研究成果。     

固体火箭发动机无损检测和无损评价技术的现状

无损检测和评价技术在固体火箭发动机研制中起着重要的作用,该文介绍了国外固体发动机无损检测和评价技术的新进展,论述了无损检测和评价技术是保证固体发动机质量和可靠性的关键技术之一,并预示了未来的发展趋势。     

DATA MODEL FOR MULTIMEDIA DATABASE SYSTEM NHMDB BASED ON NF~2 DATA MODEL

ＤＡＴＡＭＯＤＥＬＦＯＲＭＵＬＴＩＭＥＤＩＡＤＡＴＡＢＡＳＥＳＹＳＴＥＭＮＨＭＤＢＢＡＳＥＤＯＮＮＦ~２ＤＡＴＡＭＯＤＥＬ￥ＧｕｏＨｏｎｇｙｉｎｇ；ＬｉｎＪｕｎｈａｉ；ＴｉａｎＣａｎｇｈａｉ（ＤｅｐａｒｔｍｅｎｔｏｆＣｏｍｐｒｔｅｒＳｃｉｅｎｃｅａｎ?..     

雷达RCS测量的月球标定方法

提出利用月球的雷达标定方法，分析了月球作为脉冲雷达标定目标的电磁散射特性。研究了月球标定时雷达工作方式的有关问题，并对方法效能进行了评估。     

大气温度剖面的行星波驻波结构

利用Ｎ８ｍｂｕｓ－７卫星上角度扫描红外辐射计（ＳＡＭＳ）的资料，分析出大气温度剖面具有行星波垂直结构的驻波结构；讨论了波长、振幅随高度的分布，驻波结构随经度、纬度的变化，以及可能的形成机制。     

界面层及其建模方式对编织结构CMC材料导热系数影响研究

针对编织结构陶瓷基复合材料（Ceramic matrix composite,CMC）中基体、纤维束和界面层等组分的不同传热特征,以及考虑到界面层结构极薄的尺寸特征,探究了界面层及其在细观结构代表单元中的引入方式对编织结构CMC材料内部热量传输特征和各向异性导热系数的影响。研究中对比分析了不考虑界面层、含隐式界面层和含显式界面层等三种代表性体积单元模型的温度场、热流密度场及各向异性等效导热系数,获取了界面层导热系数对CMC材料整体导热系数的影响规律。研究结果表明：编织结构CMC材料内部温度场存在明显的不均匀性,不同模型计算获取的热流密度场具有明显区别。同时基于三个模型获取的各向异性导热系数也具有较大差异,显示界面层方法预估精度较高。此外,随着界面层导热系数增加,CMC材料整体各向异性导热系数明显增加,其对水平经纱Y方向上等效导热系数的影响最大。     

世界无人机和巡航导弹用发动机发展概况

简述了世界上无人机和巡航导弹用发动机的研制历程 ,分析了弹用小型发动机未来的发展趋势。     

合成孔径雷达(SAR)正侧视数据转换成前斜视的速度合成法

通过一般的商用合作渠道较易获得正侧视 SAR的原始数据。相对而言 ,其他照射模式 ,如前斜视、聚束模式等的实飞数据却很难得到。提出一种新的思路 ,采用一种速度合成法 ,完成正侧视的原始数据到前斜视模式的近似转换。仿真实验证明了这种方法的可行性     

射频识别技术在实验室收费系统中的应用

基于ISO14443A国际标准的射频识别技术已经成熟,并得到广泛应用.为此介绍了射频识别技术在实验室收费系统中的应用,给出了射频卡系统的工作原理,详细探讨了Mifare射频卡的结构和特点,并根据实验室收费系统的实际需要,实现了下位机射频卡读写器的软硬件设计和上位机实验室收费系统的设计,最后对系统进行了结果分析.