Interference Due to Limiting and Demodulation of Two Angle Modulated Signals

Two angle modulated signals (FM or PM) passing through a limiter and then a demodulator are analyzed. The analysis considers the problem of adjacent carrier interference, direct adjacent channel interference (DACI) or cross talk, and adjacent channel interference (ACI). The analysis of adjacent carrier interference shows that if the 3rd order IM is not to overlap the signal spectra, the carrier frequencies must be separated by 2B where B is the bandwidth of each carrier. The ACI analysis shows that the carrier frequencies must be separated by B+2?m for no ACI, since the demodulator reduces the bandwidth of the 3rd order IM from 3B to 2B+2?m where ?m is the maximum frequency of each baseband. The DACI analysis shows that DACI does not exist in a PM system and is -52 dB for an ideal hard limiter with no bandpass filter. But the DACI is -58 dB for an ideal hard limiter with a more realistic bandpass filter.     

Exercise response to simulated weightlessness

Two bed rest analog studies of space flight were performed; one 14 d and the other 28 d in duration. Exercise response was studied in detail during the 28 d study and following both the 14 d and 28 d studies. This paper relates the results of these studies to physiologic changes noted during and following space flight. The most consistent change noted after both bed rest and space flight is an elevated heart rate during exercise. A second consistent finding is a postflight or postbed rest reduction in cardiac stroke volume. Cardiac output changes were variable. The inability to simulate inflight activity levels and personal exercise makes a direct comparison between bed rest and the results from specific space flights difficult.     

Global magnetic attitude control of spacecraft in the presence of gravity gradient

The problem of Earth-pointing attitude control for a spacecraft with magnetic actuators is addressed and a novel approach to the problem is proposed, which guarantees almost global closed loop stability of the desired relative attitude equilibrium for the spacecraft. Precisely, a proportional derivative (PD)-like state feedback control law is employed together with a suitable adaptation mechanism for the controller gain. Simulation results are presented, which illustrate the performance of the proposed control law     

Position and Velocity Estimation Via Bearing Observations

The problem of performing target motion analysis using noisy bearing measurements derived from multiple observation platforms or from a single moving observer is addressed. For the latter case, the properties of an estimator based on a Cartesian model of the process are detailed. Methods of providing estimates both before an observer maneuver, when the process is unobservable, and following an observer maneuver are developed. The results of an experimental study are presented.     

A technique of shaping the barrel-type parts

In this paper, a new technique for shaping the thin-walled barrel-type parts is presented.     

Approximate analytical solutions of stability problems for skew plates under combined loading

The known analytical solutions of the linearized stability problems for rectangular hinged plates under the combined loading are generalized to the similar problems for skew plates, the deformation mechanics of which is described by the equations of the classical theory formed in the oblique Cartesian coordinates.     

Experimental study of radial temperature gradient-reducing devices in GTE rotor disks

In this paper, we examine experimentally some devices the principle of action of which is based on using the dynamic pressure of air extracted to engine cooling and which are meant for reducing the radial temperature gradient in GTE rotor disks. We established that the devices equipped with the ejector channels make it possible to accelerate the process of the disk hub heating by hot air suction from the cavity periphery towards the rotor axis of rotation. Using the data of visualization studies, we show the possibility for efficient operation of ejector devices in the conditions of real GTE rotor circumferential velocities.     

Optimization of electrode system for the aircraft time-of-flight ion-marking airspeed and angle of attack sensor

A technique of optimizing the electrode system of the differential recorder for the aircraft time-of-flight ion-marking airspeed and aircraft angle of attack sensor by the criterion of ion-marking recording error variance minimum is considered. The technique is based on analyzing the function of spatial distribution for the ion-marking and recorder electrode interaction field potential and determining a point for which this function reaches the maximum slope. The relations making it possible to synthesize the sensor electrode system by the complex criterion as a ratio of error variance to transformation channel response are obtained.     

Application of high-order accurate methods to solve the computational gas dynamics and aeroacoustics problems

The application of the low dissipative high-order accurate scheme for numerical solution of the Euler and Navier-Stokes equations in the two-dimensional statement is considered. The scheme of calculating space derivatives is the seven-point central-difference approximation of the fourth order with the coefficients optimized to reduce the dispersion errors. The optimized six-step Runge-Kutta method is used for evaluating the time derivatives. By means of filtration, spurious pulsations are suppressed and shocks are processed. The results of verifying the calculation scheme realized on the stationary problem of flow around the model turbine blades are presented.     

Calculation of setup variables for the process of bending and rolling thin-walled components using the finite difference method

A mathematical model of the process of bending and rolling the thin-walled components is presented taking into account the geometrical nonlinearity. Also presented is the technique for calculating the setup variables of bending equipment, which is based on reduction of the initial differential boundary-value problem to the discrete one with the use of the finite difference method.