Steady State Analysis of the Rectified Superconducting Alternator

Equations are derived to predict the electrical behavior of a three-phase superconducting alternator connected to a full-wave bridge rectifier. This is accomplished by expanding a previous analysis for conventional rectified alternators and adding computational impovements. The significance of the work is that it provides a means of calculating certain critical variables such as the ac current in the superconducting field winding and the ac voltage harmonics at the rectified output. A numerical example based on a machine designed for airborne applications is included.     

Synthesizing the control system of a small gliding unmanned aerial vehicle with high-aspect ratio wing

In this paper, we consider a problem of synthesizing the control system of a small gliding (unpowered) aerial vehicle (GAV) with a high-aspect ratio wing (?? ?? 10). This wing makes it possible to increase significantly the flight range and improve the maneuvering characteristics of the aerial vehicle itself.     

Gravity and perceptual stability during translational head movement on earth and in microgravity

We measured the amount of visual movement judged consistent with translational head movement under normal and microgravity conditions. Subjects wore a virtual reality helmet in which the ratio of the movement of the world to the movement of the head (visual gain) was variable. Using the method of adjustment under normal gravity 10 subjects adjusted the visual gain until the visual world appeared stable during head movements that were either parallel or orthogonal to gravity. Using the method of constant stimuli under normal gravity, seven subjects moved their heads and judged whether the virtual world appeared to move “with” or “against” their movement for several visual gains. One subject repeated the constant stimuli judgements in microgravity during parabolic flight. The accuracy of judgements appeared unaffected by the direction or absence of gravity. Only the variability appeared affected by the absence of gravity. These results are discussed in relation to discomfort during head movements in microgravity.     

Fluxes of Quasi-trapped Electrons with Energies >0.08 MeV in the Near-Earth Space on Drift Shells <Emphasis Type="Italic">L</Emphasis> < 2

We study the characteristics of fluxes of electrons with energy >80 keV in the near-Earth space regions corresponding to the drift shells L = 1.7, 1.4, and 1.1 observed during the entire period of the GRIF experiment onboard the Spectr module of the Mir orbital station from October 1995 to June 1997. The obtained geographic maps of the distribution of electron fluxes at the height of the station flight (400 km) and, also, the estimates of the spectra indicate that the South-Atlantic Anomaly provides for a mechanism of stable replenishment for shells with L < 1.5. The mechanism of stable replenishment of shells with L < 1.5 may be due to the scattering, in the residual atmosphere, of electrons from the inner radiation belt precipitating into the region of the South-Atlantic Anomaly.     

一种新型多普勒噪声抑制技术对BepiColombo任务无线电科学实验的性能提升

在欧洲空间局和日本宇宙开发机构联合开展的BepiColombo水星任务中,将开展水星轨道器无线电科学实验,包括估计水星的引力场及其旋转状态,并对广义相对论进行验证。目前地面系统和星上设备的主流配置可以在无线电科学实验中建立X/X、X/Ka和Ka/Ka多个频段的链路,测速精度可达3 um/s（1 000 s积分）,测距精度为20 cm。提出了基于时延机械噪声对消技术提高无线电科学实验性能的方案。时延机械噪声对消技术需要处理在两个测站不同时刻的测量数据,一个测站实施双向多普勒测距,对另一个单收测站的要求较为严格,该测站需要具有较好的对流层条件。这种方法能够显著降低Ka频段双向链路的主要测量噪声,包括由对流层和天线机械系统震动引起的噪声。我们给出了端到端的仿真性能,并估计了在使用时延机械噪声对消技术前提下的水星引力场和旋转状态。考虑使用NASA位于美国本土戈尔德斯敦的DSS-25天线或欧空局位于阿根廷马拉圭的DSA-3天线作为双程测量站,并考虑使用位于智力的APEX天文观测天线作为单收站。分析结果表明在最好的噪声条件下,使用DSA-3天线作为双程测量站时,时延机械噪声对消技术可将待估计的全局和局部参数的估计精度提升一倍。对于无线电科学实验的目标,这一可能的性能提升对行星地质物理学很有意义,它将有益于研究水星内部的结构。     

Ground based ISS payload microgravity disturbance assessments

In order to verify that the International Space Station (ISS) payload facility racks do not disturb the microgravity environment of neighboring facility racks and that the facility science operations are not compromised, a testing and analytical verification process must be followed. Currently no facility racks have taken this process from start to finish. The authors are participants in implementing this process for the NASA Glenn Research Center (GRC) Fluids and Combustion Facility (FCF). To address the testing part of the verification process, the Microgravity Emissions Laboratory (MEL) was developed at GRC. The MEL is a 6 degree of freedom inertial measurement system capable of characterizing inertial response forces (emissions) of components, sub-rack payloads, or rack-level payloads down to 10(-7) g's. The inertial force output data, generated from the steady state or transient operations of the test articles, are utilized in analytical simulations to predict the on-orbit vibratory environment at specific science or rack interface locations. Once the facility payload rack and disturbers are properly modeled an assessment can be made as to whether required microgravity levels are achieved. The modeling is utilized to develop microgravity predictions which lead to the development of microgravity sensitive ISS experiment operations once on-orbit. The on-orbit measurements will be verified by use of the NASA GRC Space Acceleration Measurement System (SAMS). The major topics to be addressed in this paper are: (1) Microgravity Requirements, (2) Microgravity Disturbers, (3) MEL Testing, (4) Disturbance Control, (5) Microgravity Control Process, and (6) On-Orbit Predictions and Verification.     

Social desirability bias in personality testing: implications for astronaut selection

The assessment of personality is recognized by space agencies as an approach to identify candidates likely to perform optimally during spaceflights. In the use of personality scales for selection, the impact of social desirability (SD) has been cited as a concern. Study 1 addressed the impact of SD on responses to the Personality Characteristic Inventory(PCI) and NEO-FFI. This was achieved by contrasting scores from active astronauts (N=65) with scores of successful astronaut applicants (N=63), and between pilots applicants (N=1271) and pilot research subjects (N=120). Secondly, personality scores were correlated with scores on the Marlow Crown Social Desirability Scale among applicants to managerial positions (N=120). The results indicated that SD inflated scores on PCI scales assessing negative interpersonal characteristics, and impacted on four of five scales in NEO-FFI. Still, the effect sizes were small or moderate. Study 2 addressed performance implications of SD during an assessment of males applying to work as rescue personnel operations in the North Sea (N=22). The results showed that SD correlated negatively with cognitive test performance, and positively with discrepancy in performance ratings between self and two observers. In conclusion, caution is needed in interpreting personality scores in applicant populations. SD maybe a negative predictor for performance under stress.     

2004年3月13日TC-1和Cluster卫星联合观测的磁通量传输事件

分析了2004年3月13日12:15到12:25UT期间TC-1和Cluster卫星簇的磁通门磁力计(FGM)和电子/电流试验仪(PEACE)的联合观测数据.在此期间,TC-1卫星位于日下点以南的磁层顶附近的磁鞘中,并在12:19UT左右观测到了一个典型的先正后负的磁鞘磁通量传输事件(FTE);而Cluster卫星簇位于北半球日侧高纬磁层项附近,并于12:23UT左右穿出磁层顶进入磁鞘,且在12:21 UT左右也观测到了一个典型的先正后负的磁层FTE.比较分析发现此两个FTE具有类似的磁场结构和等离子体特征,可能是同一个北向运动的FTE先后被TC-1和Cluster卫星观测到.利用Cluster 4颗卫星的多点同时观测数据,采用最小方向微分法和时空微分方法,推断Cluster卫星观测的这个FTE是尺度大小约为1.21Re的准二维结构,其运动方向为东北方向,与Cooling模型预测方向基本一致.利用Cooling模型的预测,推算了TC-1卫星在12:19UT观测的FTE的运动速度和尺度,进而得出随着通量管的极向运动,其速度和尺度均有所增加.     

Mercury’s Weather-Beaten Surface: Understanding Mercury in the Context of Lunar and Asteroidal Space Weathering Studies

Mercury’s regolith, derived from the crustal bedrock, has been altered by a set of space weathering processes. Before we can interpret crustal composition, it is necessary to understand the nature of these surface alterations. The processes that space weather the surface are the same as those that form Mercury’s exosphere (micrometeoroid flux and solar wind interactions) and are moderated by the local space environment and the presence of a global magnetic field. To comprehend how space weathering acts on Mercury’s regolith, an understanding is needed of how contributing processes act as an interactive system. As no direct information (e.g., from returned samples) is available about how the system of space weathering affects Mercury’s regolith, we use as a basis for comparison the current understanding of these same processes on lunar and asteroidal regoliths as well as laboratory simulations. These comparisons suggest that Mercury’s regolith is overturned more frequently (though the characteristic surface time for a grain is unknown even relative to the lunar case), more than an order of magnitude more melt and vapor per unit time and unit area is produced by impact processes than on the Moon (creating a higher glass content via grain coatings and agglutinates), the degree of surface irradiation is comparable to or greater than that on the Moon, and photon irradiation is up to an order of magnitude greater (creating amorphous grain rims, chemically reducing the upper layers of grains to produce nanometer-scale particles of metallic iron, and depleting surface grains in volatile elements and alkali metals). The processes that chemically reduce the surface and produce nanometer-scale particles on Mercury are suggested to be more effective than similar processes on the Moon. Estimated abundances of nanometer-scale particles can account for Mercury’s dark surface relative to that of the Moon without requiring macroscopic grains of opaque minerals. The presence of nanometer-scale particles may also account for Mercury’s relatively featureless visible–near-infrared reflectance spectra. Characteristics of material returned from asteroid 25143 Itokawa demonstrate that this nanometer-scale material need not be pure iron, raising the possibility that the nanometer-scale material on Mercury may have a composition different from iron metal [such as (Fe,Mg)S]. The expected depletion of volatiles and particularly alkali metals from solar-wind interaction processes are inconsistent with the detection of sodium, potassium, and sulfur within the regolith. One plausible explanation invokes a larger fine fraction (grain size <45 μm) and more radiation-damaged grains than in the lunar surface material to create a regolith that is a more efficient reservoir for these volatiles. By this view the volatile elements detected are present not only within the grain structures, but also as adsorbates within the regolith and deposits on the surfaces of the regolith grains. The comparisons with findings from the Moon and asteroids provide a basis for predicting how compositional modifications induced by space weathering have affected Mercury’s surface composition.     

Precipitation of subrelativistic-energy electrons near the polar boundary of the Earth radiation belt according to the data of measurements on the <Emphasis Type=Italic>Vernov</Emphasis> and <Emphasis Type=Italic>Lomonosov</Emphasis> satellites

The work is devoted to observations of sharp growths of magnetospheric electron fluxes in the vicinity of the polar boundary of the outer radiation belt of the Earth according to the data of measurements on the Vernov and Lomonosov satellites. This precipitation was observed at the high-latitude boundary of the outer radiation belt toward the equator from the isotropization boundary, and can be caused by scattering waves of various physical natures, including electromagnetic and electrostatic waves.