A review of long drop tubes as a supplement/alternative to space experiments

The 100 meter high drop tube at the Marshall Space Flight Center has proven to be a viable facility for studies of containerless solidification. Advantages are that experiments are inexpensive and large numbers of specimens can be processed rapidly. It would not be unusual to run ten specimens in a day. Another significant advantage is that the undercooling behavior can be followed with sufficient sensitivity to easily detect the onset of recalescence and subsequent events.Disadvantages are the restrictions on specimen sizes and types of alloys that can be run in a microgravity environment. Practical specimen sizes range between 50 mg and 500 mg depending on the type of furnace being used. Refractory alloys can be processed in a vacuum (about 10^?5 torr) and therefore at microgravity. Non-refractory alloys demand an atmosphere (about 200 torr) to obtain appreciable undercooling before impact at the bottom of the tube. Under these conditions significant g forces result.Because of the present limitations of the 100 meter drop tube, the most definitive work has been done on niobium based alloys. Large amounts of undercooling have been observed routinely and the effects of undercooling on microstructure have been characterized in detail. X-ray diffraction, scanning electron microscopy, and transmission electron microscopy have been used to determine types of phases, amounts of phases, and compositions of phases. It is clear, as would be expected, that the results bear some resemblance to rapid solidification processing by quenching. However, there are dissimilarities due to the uniqueness of solidification by deep undercooling without quenching in long drop tubes and accompanying recalescence effects.     

IR-spectroscopy of ionosphere from stratospheric balloons

The radiation spectra of the ionosphere in the 4–5 μm region have been determined from stratospheric balloons by means of the specially elaborated method of the registration of angular and spectral distribution of the radiation. The radiation bands of 4.4 μm and 4.8 μm which have 0.1–0.2 erg cm^?2 sr^?1s^?1. brightness obtained in two flights, are identified with the vibration-rotation transitions of the ion NO⁺ (0 - 1) and the molecules N¹⁴N¹⁵ (0 - 1) and CO (0 - 1) and (3 - 2) from altitudes between 120 and 500 km.     

Performance Degradation of MTI Circuits Due to Amplitude Limiting

The loss in output signal-to-noise ratio (SNR) due to amplitude limiting is obtained for a radar circuit consisting of a bandpass limiter, coherent demodulator, matched filter, and moving-target-indicator (MTI) filter. The circuit is used in scanning MTI radars. The tandem connection of the limiter and coherent demodulator is a model for the saturation of the intermediate-frequency (IF) demodulator of an MTI radar. Results on special functions are used to obtain simple formulas for the loss in output SNR relative to a linear IF demodulator when the input SNR is less than -15 dB and the number of hits per 3-dB beamwidth exceeds 15.     

ELF radio signals produced in the auroral ionosphere by non-linear demodulation of signals from high-power amplitude-modulated transmitters

ELF and VLF radio signals were recorded in the afternoon to early morning (local time) between 24 March and 4 April 1979, in Northern Scandinavia. Apart from signals of natural origin, timing signals, i.e. six pips of equal duration of 105 ± 8 ms, at 1 kHz ± 0.5 Hz, were observed on the hour UT. Such signals only occur on days of relatively high geomagnetic activity during enhanced auroral electrojet activity. They are believed to be generated by non-linear demodulation (self-detection) of signals from two or more amplitude modulated transmitters in the USSR, operating at 173, 200, 236, 263 and 657 kHz. The simplest explanation for the observations is provided by the three transmitters operating at 173 kHz.     

Gravitational influence on binary alloy melt equilibria

Micro- and macrosegregation, the nonuniform redistribution of solute during solidification, are common to both casting and welding, processes of fundamental importance in materials engineering. In multicomponent crystal growth where solid/liquid density differences are appreciable gravity-induced separation can lead to significant spatial variations in resulting ingot composition. In fact, this phenomenon is also operative in liquid/liquid systems such as monotectic alloys exhibiting a liquid miscibility gap, where buoyancy-driven flows can result in a sometimes unwanted separation of phases upon cooling through the miscibility dome.     

Modeling Random Gyro Drift Rate by Data Dependent Systems

A new modeling procedure is presented in which a mathematical model for random gyro drift rate is obtained directly from the original observations without requiring any theoretical conjectures or preprocessing of the data. The adequate model so obtained confirms the presence of a random walk component causing the "steady state" drift and a stochastic component of the nature of correlated noise. It also provides a quantitative measure of the relative contribution of each component, useful in determining the quality of the gyro in guidance over extended periods.     

Knowledge Acquisition for ATE Diagnosis

An applied intelligence program for ATE fault diagnosis shows promise as an effective method to reduce mean time to repair (MTTR). The types of knowledge required by an intelligent diagnostic for VLSI test systems, the resources needed to derive that knowledge, the approach implemented to organize it, and the final form of the knowledge representations which resulted from our work are discussed in this paper.     

Application of remote sensing techniques in mineral resources survey — a case study pertaining to Singhbhum Shear Zone,Bihar, India

Geological analysis and evaluation of digitally processed and enhanced LANDSAT MSS data products for three test areas of Singhbhum Shear Zone, India has led to certain significant results regarding optimisation and utility of such techniques for geological studies and obtaining additional/new information regarding lithology and structure. Three band-to-band ratio images are found to give best results. Lithologic formations could be subdivided into a number of units. The Westward and southeastward extension of the shear zone could be delineated thereby indicating scope of mineralisation in these parts.     

Crystallization of metal alloys in microgravity and uniform compression conditions

This is an analysis of the experimental results to study the metastable phase formation while crystallization of binary metal melts in microgravity and quasi-isostatic (uniform) compression takes place. The alloy system PbSn serves as an illustration