Cosmic Ray Energetics And Mass for the International Space Station (ISS-CREAM)

The Cosmic Ray Energetics And Mass (CREAM) instrument is configured with a suite of particle detectors to measure TeV cosmic-ray elemental spectra from protons to iron nuclei over a wide energy range. The goal is to extend direct measurements of cosmic-ray composition to the highest energies practical, and thereby have enough overlap with ground based indirect measurements to answer questions on cosmic-ray origin, acceleration and propagation. The balloon-borne CREAM was flown successfully for about 161 days in six flights over Antarctica to measure elemental spectra of Z = 1–26 nuclei over the energy range 10¹⁰ to >10¹⁴ eV. Transforming the balloon instrument into ISS-CREAM involves identification and replacement of components that would be at risk in the International Space Station (ISS) environment, in addition to assessing safety and mission assurance concerns. The transformation process includes rigorous testing of components to reduce risks and increase survivability on the launch vehicle and operations on the ISS without negatively impacting the heritage of the successful CREAM design. The project status, including results from the ongoing analysis of existing data and, particularly, plans to increase the exposure factor by another order of magnitude utilizing the International Space Station are presented.     

A 3NM-64_He added to LARC for Solar Extreme Event studies during solar cycle 24

The Antarctic Laboratory for Cosmic Rays (LARC, acronym for Laboratorio Antartico per i Raggi Cosmici or Laboratorio Antártico para Rayos Cósmicos) operates on King George Island (South Shetlands). Since January 1991 a standard 6NM-64 detector has been recording continuous cosmic ray measurements and several Ground-Level Enhancements have been registered. Here we describe the different phases performed in Italy for the realization of a 3NM-64_³He detector, which started its measurements during the Italian XXII Antarctic Summer Campaign. Data recorded during solar activity cycle 24 will furnish an useful research tool for the next Solar Extreme Events.     

Coronal fast wave trains of the decimetric type IV radio event observed during the decay phase of the June 6, 2000 flare

The 22 min long decimetric type IV radio event observed during the decay phase of the June 6, 2000 flare simultaneously by the Brazilian Solar Spectroscope (BSS) and the Ond?ejov radiospectrograph in frequency range 1200–4500 MHz has been analyzed. We have found that the characteristic periods of about 60 s belong to the long-period spectral component of the fast wave trains with a tadpole pattern in their wavelet power spectra. We have detected these trains in the whole frequency range 1200–4500 MHz. The behavior of individual wave trains at lower frequencies is different from that at higher frequencies. These individual wave trains have some common as well as different properties. In this paper, we focus on two examples of wave trains in a loop segment and the main statistical parameters in their wavelet power and global spectra are studied and discussed.     

SVIRCO contribution to the world-wide network of cosmic ray detectors

Since 1954 a research team (called SVIRCO) has been performing measurements of cosmic rays in Rome at La Sapienza University till 1997 and then at Roma Tre University. The experimental work carried out over more than 50 years is summarized in this paper. It describes: the early history of SVIRCO, the evolution from SVIRCO station to SVIRCO observatory, land and sea cosmic-ray surveys and the mini-network of neutron monitors, operating inside the world-wide network of cosmic ray detectors.     

The radiation environment in the ISS-USLab measured by ALTEA: Spectra and relative nuclear abundances in the polar,equatorial and SAA regions

We present here the energy spectra relative to different geomagnetic regions as measured by the ALTEA (Anomalous Long Term Effects on Astronauts) detector in the International Space Station – USLab from August 2006 to July 2007.     

跨声速流自发凝结水滴的测量

应用基于多波长消光法原理发展的光学探针,测量了跨声速风洞中不同马赫数湿空气流自发凝结形成的水滴尺寸及浓度,并给出了实验结果     

收敛形进气道数值研究的验证

介绍一种新型的、具有最小喉道面积的三维高超声速进气道 (称之为收敛形进气道 )的数值和实验研究结果。表明使用这种形式的进气道 ,在整个飞行速度范围内可以降低阻力和高超声速发动机表面的热防护要求 ,通过降低外压缩表面的倾斜度和减少进气道及燃烧室壁的面积就可以做到这一点。在采用低维次流动的气体动力设计方法的基础上设计成这种形式的进气道。计算是在无粘气体模型构架内用有限体积法进行的。同时用边界层方程计算出计及粘性的气流特性和进气道特性。数值算法是通过收敛形进气道的有限宽楔形外压缩表面的计算和实验数据来验证的。进行实验研究的马赫数M=2～ 1 0 7,基于模型进气道高度的雷诺数Re=( 1～ 5) × 1 0 6。数值计算与实验结果一致性很好。这些结果也和通常的二维进气道的数据作了比较。     

Implications of X-ray Observations for Electron Acceleration and Propagation in Solar Flares

High-energy X-rays and ??-rays from solar flares were discovered just over fifty years ago. Since that time, the standard for the interpretation of spatially integrated flare X-ray spectra at energies above several tens of keV has been the collisional thick-target model. After the launch of the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI) in early 2002, X-ray spectra and images have been of sufficient quality to allow a greater focus on the energetic electrons responsible for the X-ray emission, including their origin and their interactions with the flare plasma and magnetic field. The result has been new insights into the flaring process, as well as more quantitative models for both electron acceleration and propagation, and for the flare environment with which the electrons interact. In this article we review our current understanding of electron acceleration, energy loss, and propagation in flares. Implications of these new results for the collisional thick-target model, for general flare models, and for future flare studies are discussed.     

Numerical study of intrachamber processes dynamics at nozzleless solid propellant rocket engine actuation

The results of the comprehensive numerical analysis for dynamics of intrachamber processes that appear at nozzleless solid propellant rocket engine (SPRE) actuation are presented. A complete cycle of rocket engine operation is analyzed. We solve a conjugate problem involving the igniter actuation; heating, ignition and following combustion of a solid propellant charge; a combustion product flow in the combustion chamber; depressurization of the combustion chamber, and the subsequent motion of the rocket engine blank; variation of the combustion surface geometry at the expense of the gradual and nonuniform burnout of solid propellant web.