Bearing Ambiguity and Resolution in Interference Direction Finders

Radio direction finders based on the principles of interference measurement provide increased angular resolution as the number of bearing ambiguities increase. In spite of the diversity of interference direction finder design, the resolution of bearing ambiguities reduces to a simple relative phase measurement on crossed baselines less than ?/2 long. This principle is applied in a review of current interference direction finder (DF) designs from the Adcock to the multiwavelength interferometer including both analog and digital bearing computation and display. Analysis shows that simple digital logic circuits may be used to resolve bearing ambiguities in multichannel DF rather than the "sense" displays of conventional analog design. This technique has the advantage of keeping direction finding and sense finding functions simultaneous but separate so that the DF information is not degraded by the injection of the ambiguity resolving sense signal.     

One-kVA, Three-Phase dc-ac Inverter with Digital Control

This paper describes a method of applying digital techniques to the control of a 1-kVA three-phase dc-ac inverter to generate a sinusoidal 400-Hz output, using high-frequency bridge-chopper techniques. The model which was constructed used predominantly off-theshelf digital microcircuits and resulted in a device with an overall efficiency of 85 percent, in a 0.52 cubic-foot package which weighed 19.5 lbs. Sinusoidal output with less than 2 percent harmonic distortion at 115 volts line to neutral was obtained with 28 volts dc input.     

Switchless Control Strategies for Minimum Time Frequency Transitions in Phase-Locked Loops

The problem of minimum time frequency transitions in phase-locked loops with both phase and frequency controls applied is investigated using Pontryagin's maximum principle. Typically, a type II secondorder loop with a damping ratio of 0.707 subjected to a step change in the frequency of its input signal is considered and switchless control strategies that force the transients in the loop to settle down in minimum time are obtained.     

Stable mid-latitude red arcs: Observations and theory

Summary The observational features of the arc are fairly well established. At present, the thermal conduction model appears to explain the red arc features most consistently, but it must be noted that a soft electron flux would give very similar results. Ion temperature measurements in the vicinity of an arc, which should be forthcoming in the very near future, can establish conclusively whether transverse electric fields play any important role in the formation of the arcs. Accepting the assumption that the arcs are the result of energy flowing down from the plasmasphere, the major remaining question is: where does the energy come from and how does it get into the plasmasphere? The various proposed mechanisms discussed in the previous chapter appear feasible, but much work needs to be done before this problem is completely resolved.On leave from the Department of Electrical Engineering, The University of Michigan, Ann Arbor.The National Center for Atmospheric Research is sponsored by the National Science Foundation.     

Evaluation of Multipoint Interaction in the Design of a Thin Diffraction-Limited Active Mirror

Active control of a thin, deformable mirror is one approach to obtaining diffraction-limited performance from large orbiting telescopes. The control system design requires knowledge of the mirror reaction to the multiple forces used to maintain the desired mirror figure. A structural analysis program is used to obtain estimates of the static deflections of a point-loaded, thin, shallow, spherical primary mirror. The calculated deflections are compared to experimentally measured deflections for a specific configuration.     

Some Comments on the Dynamics of Urban Structural Development

The suggestion is made that the aerospace industry examine the dynamics of urban structural development, that it identify the forces which act on the elements comprising the structure of the city, and that it describe the relationship between and the relative movements of those elements. By formulating such a general theory of urban structural development, urban political, social, and economic leadership may be given the means by which permanent remedies?including technological?may be devised and applied. This paper presents examples of such means and explains their application and effects.     

Auroral electrons

Satellite and rocket measurements of auroral electrons (which have been made since Brown's (1966) and Pfister's (1967) papers have appeared) are reviewed, and the salient characteristics of auroral electrons which emerge from all types of measurements are summarized. Effects of the atmosphere on the energy distribution of electron fluxes are discussed. Ionization rates associated with typical fluxes are derived. Observable effects produced in the atmosphere and the fate of auroral electrons are briefly described.This paper does not discuss the role of auroral protons (or particles). A recent review on the subject has been given by Eather (1967).     

The Design of Huffman Sequences

The paper presents a method by which the zeros of the polynomial representing a Huffman (impulse-equivalent) pulse sequence can be chosen so as to exert a degree of control on the form of the energy distribution of the signal in the time-frequency plane. This makes it possible to design Huffman pulse sequences which are suitable for use as radar or sonar signals in situations where significant target velocity occurs.     

Soil and crop management experiments in the Laboratory Biosphere: an analogue system for the Mars on Earth(R) facility.

During the years 2002 and 2003, three closed system experiments were carried out in the "Laboratory Biosphere" facility located in Santa Fe, New Mexico. The program involved experimentation of "Hoyt" Soy Beans, (experiment #1) USU Apogee Wheat (experiment #2) and TU-82-155 sweet potato (experiment #3) using a 5.37 m2 soil planting bed which was 30 cm deep. The soil texture, 40% clay, 31% sand and 28% silt (a clay loam), was collected from an organic farm in New Mexico to avoid chemical residues. Soil management practices involved minimal tillage, mulching, returning crop residues to the soil after each experiment and increasing soil biota by introducing worms, soil bacteria and mycorrhizae fungi. High soil pH of the original soil appeared to be a factor affecting the first two experiments. Hence, between experiments #2 and #3, the top 15 cm of the soil was amended using a mix of peat moss, green sand, humates and pumice to improve soil texture, lower soil pH and increase nutrient availability. This resulted in lowering the initial pH of 8.0-6.7 at the start of experiment #3. At the end of the experiment, the pH was 7.6. Soil nitrogen and phosphorus has been adequate, but some chlorosis was evident in the first two experiments. Aphid infestation was the only crop pest problem during the three experiments and was handled using an introduction of Hyppodamia convergens. Experimentation showed there were environmental differences even in this 1200 cubic foot ecological system facility, such as temperature and humidity gradients because of ventilation and airflow patterns which resulted in consequent variations in plant growth and yield. Additional humidifiers were added to counteract low humidity and helped optimize conditions for the sweet potato experiment. The experience and information gained from these experiments are being applied to the future design of the Mars On Earth(R) facility (Silverstone et al., Development and research program for a soil-based bioregenerative agriculture system to feed a four person crew at a Mars base, Advances in Space Research 31(1) (2003) 69-75; Allen and Alling, The design approach for Mars On Earth(R), a biospheric closed system testing facility for long-term space habitation, American Institute of Aeronautics and Astronautics Inc., IAC-02-IAA.8.2.02, 2002).