ELF radio signals produced in the auroral ionosphere by non-linear demodulation of signals from high-power amplitude-modulated transmitters

ELF and VLF radio signals were recorded in the afternoon to early morning (local time) between 24 March and 4 April 1979, in Northern Scandinavia. Apart from signals of natural origin, timing signals, i.e. six pips of equal duration of 105 ± 8 ms, at 1 kHz ± 0.5 Hz, were observed on the hour UT. Such signals only occur on days of relatively high geomagnetic activity during enhanced auroral electrojet activity. They are believed to be generated by non-linear demodulation (self-detection) of signals from two or more amplitude modulated transmitters in the USSR, operating at 173, 200, 236, 263 and 657 kHz. The simplest explanation for the observations is provided by the three transmitters operating at 173 kHz.     

A Nonlinear Tracker Using Attitude Measurements

The subject of this paper involves tracking the present position of a maneuvering aircraft as well as predicting its future position. A tracking filter is developed that uses aircraft attitude angles (yaw, pitch, roll) in addition to the usual radar measurements. Computer simulation of tracker performance when tracking violently maneuvering aircraft indicates that a dramatic improvement is obtained by using attitude information. The approach taken is to develop a 12-or 15-state extended Kalman filter that models both translational and rotational degrees of freedom. By measuring and estimating attitude it is possible to approximately determine the magnitude and direction of the force system acting on the vehicle and therefore determine vehicle linear acceleration. Knowledge of acceleration is then used to improve the estimate of present and future position of the vehicle being tracked. Simulation of a T-38 aircraft performing a 5 g turn indicates that the new tracker produces maximum trajectory prediction errors that are 36 percent of the errors experienced by more conventional trackers.     

Gravitational influence on binary alloy melt equilibria

Micro- and macrosegregation, the nonuniform redistribution of solute during solidification, are common to both casting and welding, processes of fundamental importance in materials engineering. In multicomponent crystal growth where solid/liquid density differences are appreciable gravity-induced separation can lead to significant spatial variations in resulting ingot composition. In fact, this phenomenon is also operative in liquid/liquid systems such as monotectic alloys exhibiting a liquid miscibility gap, where buoyancy-driven flows can result in a sometimes unwanted separation of phases upon cooling through the miscibility dome.     

Modeling Random Gyro Drift Rate by Data Dependent Systems

A new modeling procedure is presented in which a mathematical model for random gyro drift rate is obtained directly from the original observations without requiring any theoretical conjectures or preprocessing of the data. The adequate model so obtained confirms the presence of a random walk component causing the "steady state" drift and a stochastic component of the nature of correlated noise. It also provides a quantitative measure of the relative contribution of each component, useful in determining the quality of the gyro in guidance over extended periods.     

Knowledge Acquisition for ATE Diagnosis

An applied intelligence program for ATE fault diagnosis shows promise as an effective method to reduce mean time to repair (MTTR). The types of knowledge required by an intelligent diagnostic for VLSI test systems, the resources needed to derive that knowledge, the approach implemented to organize it, and the final form of the knowledge representations which resulted from our work are discussed in this paper.     

Application of remote sensing techniques in mineral resources survey — a case study pertaining to Singhbhum Shear Zone,Bihar, India

Geological analysis and evaluation of digitally processed and enhanced LANDSAT MSS data products for three test areas of Singhbhum Shear Zone, India has led to certain significant results regarding optimisation and utility of such techniques for geological studies and obtaining additional/new information regarding lithology and structure. Three band-to-band ratio images are found to give best results. Lithologic formations could be subdivided into a number of units. The Westward and southeastward extension of the shear zone could be delineated thereby indicating scope of mineralisation in these parts.     

Crystallization of metal alloys in microgravity and uniform compression conditions

This is an analysis of the experimental results to study the metastable phase formation while crystallization of binary metal melts in microgravity and quasi-isostatic (uniform) compression takes place. The alloy system PbSn serves as an illustration     

Ralicon anodes fabricated by electron beam lithography for image photon counting detectors

The Anger wedge and strip anode event location system developed for microchannel plate image photon detectors at the Space Sciences Laboratory of the University of California, Berkeley, has been extended in the present work by the use of electron beam lithography (EBL). Computer-aided design methods have been used to develop several types of RALICON ($\text{R}$eadout $\text{A}$nodes of $\text{Lit}$hographic $\text{Con}$struction) for use in photon counting microchannel plate imaging detectors. These anodes are suitable for linear, two dimensional or radial position measurements and they incorporate novel design features made possible by the EBL fabrication technique which significantly extend their application relative to published wedge-strip anode designs.     

Electromagnetic containerless undercooling facility and experiments for the shuttle

An electromagnetic furnace is being prepared for flights aboard the space shuttle. This apparatus is capable of melting metals and alloys up to 1400°C melting point by induction heating with subsequent solidification of the freely levitated melt without contact with any container. The solidification can be carried out with greatly reduced fields resulting in minimal heating and stirring of the free melt. Sequential specimens can be processed during flight. Several experiments are planned for a series of flights, beginning in 1985 with an undercooling experiment on NiSn alloys. These will be interspersed with detailed studies of fluid flow caused by low and high field levels in order to quantify the corresponding effect upon the solidification process.