Lightweight (AlGaAs)GaAs/CuInSe2 tandem junction solarcells for space applications

Mechanically stacked tandem cells consisting of GaAs thin-film upper cells and CuInSe₂ thin-film lower cells have been developed to meet the increasing power needs projected for future spacecraft. The authors report the fabrication of the first highly efficient lightweight GaAs/CuInSe₂ tandem cell on a 2-mil thick substrate, update recent performance improvements in thin-film GaAs/CuInSe₂ tandem cells, and discuss their application to space power systems. The efficiency of 4-cm² cells has improved to 21.6% AM0, the highest ever reported for a thin-film photovoltaic cell. Lightweight 4-cm² tandem cells have been successfully fabricated with efficiencies as high as 20.8%. These cells weighed about 180 mg without optimized substrate trimming. Radiation and operating temperature effects on GaAs/CuInSe₂ tandem cells are also discussed, and an interconnect scheme to form a voltage-matched string is described     

LIPS III-a solar cell test bed in space

The LIPS III satellite, which was launched into a 1100-km circular orbit of 60° inclination in the spring of 1987, is discussed. LIPS III is a member of the living-plume-shield class of spacecraft, all of which were built around a simple sheet metal plume deflector. The purpose of LIPS III was to provide a testbed for space power sources. An overview of the LIPS III system is given, and the experiments submitted for it, all but one of which were photovoltaic in nature, are described     

Electrical power distribution on space based radar satellites

The radar payload on a space-based radar (SBR) satellite could require tens of kilowatts of power distributed to many small loads over a large area. This poses special problems for the power distribution and control system (PDCS). A study that examined the power requirements of an SBR spacecraft is reported. A baseline prime power system, generating about 30 kW, was derived. The proposed distribution network would transmit 240 V at 20 kHz. The voltage would be downconverted in one converter for about 100 transmit/receive modules. The design considerations are discussed, and the baseline PDCS is described     

Physical interpretation of interdisciplinary solar/interplanetary observations relevant to the 27–29 June 1980 SMY/STIP event no. 5

A sequence of six well defined interplanetary structures (magnetic clouds) was identified in the solar wind and magnetic field measurements of Helios-1 from 29 June-01 July, 1980. (location 0.64–0.67 AU, C. Long. ～165°, C. Lat. ～5.8°). These structures were characterized by a large northward directed solar wind flow; by well defined directional discontinuities of mainly the ‘tangential-type’ at their beginnings and ends; by some increase in proton and by very pronounced increases in alpha particle number densities - each accompanied by sudden temperature decreases (or in one case by an increase); by some times an increase in magnetic field strength and by values of Nα/Np typical of the inner solar atmosphere. These structures are suggested to have been ejections from a succession (27–29 June, 1980) of Type II producing flares in Hale Region 16923 which coronagraph and X-ray (GOES) data indicate constituted a family of transient producing events. Only two interplanetary shocks were identified in the relevant Helios-1 records. It is suggested on the basis of observations of the directionality of certain of the flare related Type II bursts that some of these shocks could have been missed by the spacecraft. This implies that, in the absence of directional information, correlation of an observed interplanetary shock wave with a solar Type II burst may not always lead to a unique result.     

Properties of the neutral density and composition in the thermosphere

Measurements of the density and composition of the thermosphere between 150 and 500 km, which were obtained by the S3-1 satellite, have been compared with the Jacchia and MSIS models. The measurements of the densities of O, N₂, N and Ar show some differences from the current models which should be considered during the preparation of the next CIRA model. The Ar measurements are particularly useful in examining the response of the neutral atmosphere to geomagnetic heating. These results are useful in establishing the appropriate lower boundary conditions for modeling of the thermosphere.     

Cometary habitats for primitive life.

Comet Halley studies indicate most of the nucleus is covered by an insulating crust, presumed of pyrolysed organic material. The subcrust is warmed and percolated by gases within 2AU, so provides one habitat for primitive replicating organisms. Cracks and crevices within contaminated ice in the craters provides a habitat for photosynthesising organisms. Subsurface lakes on the Europa model, though insulated by some metres of ice, would require a trigger (perhaps meteorite impact and energy source (chemical or metabolic energy) to initiate and maintain a suitable-habitat on short period comets. Constraints on transfer between comets and other planetary bodies implies that radiation-resistant species with lengthy hibernation potential would be expected.     

Recognition and Self-Organization of Nodes into DTDMA Nets

An effective relay management solution applicable to multiple terminal ground-to-ground or ground-to-air line-of-sight communication environments is described. Algorithms are developed which enable terminals first to recognize the existence or availability of other terminals, and second, to self-organize a community of terminals rapidly into local nets without the need for a master control terminal. Computer simulation results show how a static or dynamically changing user geometry can be managed. Network connectivity is provided automatically and the system protects itself against the loss of a master user by not requiring one.     

Design and operation of an algal photobioreactor system.

A photobioreactor system has been designed, constructed, and implemented to achieve efficient oxygen production for a closed ecological life support system (CELSS). The special features of this system are the optical transmission system, uniform light distribution, continuous cycling of cells, gravity-independent gas exchange, and an ultrafiltration unit. The fiber optic based optical transmission system illuminates the reactor internally and includes a light source which is external to the reactor, preventing heat generation problems. Uniform light distribution is achieved throughout the reactor without interfering with the turbulent regime inside. The ultrafiltration unit exchanges spent with fresh media and its use results in very high cell densities, up to 10(9) cells/ml for Chlorella vulgaris. The prototype photobioreactor system was operated in a batch and continuous mode for over two months. The oxygen production rate measured at 4-6 mmoles per liter of the culture per hour under continuous operation, is consistent with the expected performance of the unit for the provided light intensity.