有初始横流的冲击壁面强化的换热特性实验研究

对初始横流的冲击壁面强化的换热特性进行了实验研究。实验的参数范围：Ｒｅｊ＝５０００－２００００，Ｚｎ＝１－３，Ｇｃ／Ｇｊ＝１－１．３。实验表明：随着初始横流的增加（Ｇｃ／Ｇｊ的增大），将改善冲击粗糙肋靶面的换热特性；Ｚｎ的变化对换热有着明显的影响，存在一个最佳值；实验结果还表明冲击孔与粗糙肋相对位置对换热有影响。     

γ’粒子尺寸对定向凝固高温合金拉伸和持久性能的影响

研究了一种定向凝固高温合金析出 γ′粒子尺寸的控制规律。结果表明 :γ′粒子尺寸随固溶处理后冷却速度提高而减小 ,抗拉强度和蠕变寿命随 γ′粒子尺寸增大而降低 ,而合金的拉伸塑性将随之提高     

俯仰敏捷性评估与影响因素研究

建立了现代高机动性能战斗机俯仰敏捷性仿真计算数学模型和机动飞行时的操纵动作，以Ｆ－１６战斗机为例，计算并讨论了初始飞行状态以及飞行控制系统参数对战斗机俯仰敏捷性的影响。结果表明，选择适当的飞行状态，有利于更好地发挥飞机的俯仰敏捷性；降低飞机整体系统的阻尼，将有利于提高飞机的俯仰敏捷性；控制系统有关参数的设计，除考虑飞行品质要求外，还需综合考虑飞机敏捷性等方面的要求。     

中间层厚度对陶瓷扩散焊接头应力分布影响的数值分析

采用有限元计算方法，对平面应变、平面应力两种应力状态下含中间层的陶瓷接头界面上应力分布规律进行数值分析。得到了接头界面上正应力和剪应力沿板定的分布曲线。结果表明，中间层材料厚度小时，两种应力状态下的正应力和剪应力在接头界面上滑板定的分布基本均匀。中间层材料厚度增大，平面应变状态下试件中部的正应力增大并出现峰值；平面应力状态下在试件自由瑞边缘正应力增大并出现峰值。两种应力状态下界面上的剪应力由板中央到板边缘逐渐增大，界面上边缘处最大剪应力的值也随中间层厚度的增加而增大。因此，在保证接头接合良好的前提下，应采用小厚度的中间层。     

Automatic spectral target recognition in hyperspectral imagery

Automatic target recognition (ATR) in hyperspectral imagery is a challenging problem due to recent advances of remote sensing instruments which have significantly improved sensor's spectral resolution. As a result, small and subtle targets can be uncovered and extracted from image scenes, which may not be identified by prior knowledge. In particular, when target size is smaller than pixel resolution, target recognition must be carried out at subpixel level. Under such circumstance, traditional spatial-based image processing techniques are generally not applicable and may not perform well if they are applied. The work presented here investigates this issue and develops spectral-based algorithms for automatic spectral target recognition (ASTR) in hyperspectral imagery with no required a priori knowledge, specifically, in reconnaissance and surveillance applications. The proposed ASTR consists of two stage processes, automatic target generation process (ATGP) followed by target classification process (TCP). The ATGP generates a set of targets from image data in an unsupervised manner which will subsequently be classified by the TCP. Depending upon how an initial target is selected in ATGP, two versions of the ASTR can be implemented, referred to as desired target detection and classification algorithm (DTDCA) and automatic target detection and classification algorithm (ATDCA). The former can be used to search for a specific target in unknown scenes while the latter can be used to detect anomalies in blind environments. In order to evaluate their performance, a comparative and quantitative study using real hyperspectral images is conducted for analysis.     

机载光电跟踪系统模糊控制的优化设计与仿真

 分析了机载光电跟踪系统的构成,并对机载光电跟踪系统的最主要组成部分——陀螺稳定平台框架系统设计了基于遗传算法的模糊控制器,通过遗传算法来优化模糊控制器的规则、参数以及量化因子和比例因子。并对系统进行了详细的仿真研究,仿真结果证明基于 GA的模糊控制器设计获得了良好的控制效果。     

战斗机敏捷性的一种估算方法

介绍了敏捷性矢量的定义和估算方法，计算了架战斗机的敏捷性矢量，讨论了影响敏捷性的因素，并对计算结果进行了分析和比较。     

Performance evaluation of a cascaded logic for track formation inclutter

The authors present a Markov-chain-based performance evaluation technique for two-stage sliding-window cascaded logic (2/2×m /n) for track formation in a cluttered environment. The main features of this technique are that it avoids the need for extensive simulations and it is more realistic than previous methods, accounting for the association gate size variation. The gates are obtained from a Kalman filter and fully account for the transient observed for the cascaded logic following the two-point initiation from its first stage. Numerical examples of performance evaluation are given along with a logic design example     

平尾尾容系数对飞机俯仰敏捷性的影响

研究了平尾容系数对飞机俯仰敏捷性尺度的影响，这些尺度包括加载／卸载时间，最大正／负过载变化率，最大上仰／下俯机运范围内的俯角速率，对比计算表明:较大的尾容系数可获得较高的俯仰敏捷性，而在同一容系数下，较大的平尾面积可比较大的平尾力臂获得更高的俯仰敏捷性。另外，平尾面积和平尾力臂的影响只有一定范围内最显著，故在设计时需进行综合考虑。     

Walsh相关函数的研究

研究了既有波形畸变又有时间位移时的Ｗａｌｓｈ互相关函数，并在Ｈａｒｎｕｔｈ ＨＦ给出的Ｗａｌｓｈ互相关函数误差矩阵定性结果的基础上进一步给出了定量结果，依据这个结果，提出了选择Ｗａｌｓｈ副载波的原则。