Conceptual design of a bioregenerative life support system containing crops and silkworms

This article summarizes a conceptual design of a bioregenerative life support system for permanent lunar base or planetary exploration. The system consists of seven compartments – higher plants cultivation, animal rearing, human habitation, water recovery, waste treatment, atmosphere management, and storages. Fifteen kinds of crops, such as wheat, rice, soybean, lettuce, and mulberry, were selected as main life support contributors to provide the crew with air, water, and vegetable food. Silkworms fed by crop leaves were designated to produce partial animal nutrition for the crew. Various physical-chemical and biological methods were combined to reclaim wastewater and solid waste. Condensate collected from atmosphere was recycled into potable water through granular activated carbon adsorption, iodine sterilization, and trace element supplementation. All grey water was also purified though multifiltration and ultraviolet sterilization. Plant residue, human excrement, silkworm feces, etc. were decomposed into inorganic substances which were finally absorbed by higher plants. Some meat, ingredients, as well as nitrogen fertilizer were prestored and resupplied periodically. Meanwhile, the same amount and chemical composition of organic waste was dumped to maintain the steady state of the system. A nutritional balanced diet was developed by means of the linear programming method. It could provide 2721 kcal of energy, 375.5 g of carbohydrate, 99.47 g of protein, and 91.19 g of fat per capita per day. Silkworm powder covered 12.54% of total animal protein intakes. The balance of material flows between compartments was described by the system of stoichiometric equations. Basic life support requirements for crews including oxygen, food, potable and hygiene water summed up to 29.68 kg per capita per day. The coefficient of system material closure reached 99.40%.     

基于变量集结预测控制的四旋翼无人机控制器设计

针对四旋翼无人机路径跟踪问题,设计了一种基于变量集结预测控制的控制器。首先以四旋翼无人机状态空间模型为基础建立预测模型;接着设计控制器时采用分段集结的策略把控制量集结成三段优化序列以减少优化计算量,并降低优化保守性,为了进一步加强系统稳定性,控制器引入终端代价函数和终端约束;最后用四旋翼无人机的动力学模型作为被控对象进行仿真验证,结果表明：该控制器能使四旋翼无人机在三轴方向均能实现一个良好的路径跟踪效果。与传统方法相比,这种基于变量集结的预测控制策略能够减小在线优化量,更适合四旋翼无人机飞控芯片的应用。     

高性能混凝土的外加剂优化研究(英文)

运用不同减水剂和早强剂配制高性能混凝土(High performance concrete,HPC),测定其工作性、标准养护强度和蒸汽养护强度,研究了HPC的外加剂选用原则。结果表明,掺加聚缩酸系高效减水剂有利于HPC获得高工作性和高强度。硫酸钠早强剂将导致工作性不好,强度降低。对于蒸汽养护的HPC制品,应该优先采用硫酸钠含量低的萘系高效减水剂。因此,HPC外加剂的选择应该考虑养护条件的差异。     

《客舱服务技能》课程教学的改进与思考

《客舱服务技能》是空乘专业的一门专业必修课程。在课程改革中,如何改进《客舱服务技能》的教学效果是我们需要关注的重点。本文从目前该课程发展状况、师资、教材、实训条件、教学方法等方面对该课程的建设情况及存在的问题进行了分析与探讨。     

Flight Control System of Unmanned Aerial Vehicle

To date unmanned aerial system(UAS)technologies have attracted more and more attention from countries in the world.Unmanned aerial vehicles(UAVs)play an important role in reconnaissance,surveillance,and target tracking within military and civil fields.Here one briefly introduces the development of UAVs,and reviews its various subsystems including autopilot,ground station,mission planning and management subsystem,navigation system and so on.Furthermore,an overview is provided for advanced design methods of UAVs control system,including the linear feedback control,adaptive and nonlinear control,and intelligent control techniques.Finally,the future of UAVs flight control techniques is forecasted.     

三维四向编织复合材料等效热特性数值分析和试验研究

 采用“米”字型枝状胞体有限元模型和试验方法对三维四向编织复合材料的整体等效热膨胀系数和等效热传导系数进行了分析并将计算结果和试验值进行了比较。研究表明枝状胞体模型能较为真实的反映三维四向编织复合材料的结构构形;有限元方法在分析热膨胀、热传导方面具有较好的精度;三维四向编织复合材料编织方向的热膨胀系数随着纤维体积比的增加而减小,随着编织角的增加而减小;热传导系数随着纤维体积比的增加而增大,随着编织角的增大而增大。     

过失速机动飞机的鲁棒非线性控制律设计

 采用非线性动态逆和结构奇异值综合方法设计了过失速飞行条件下飞控系统控制律,解决了飞控设计中面临的非线性和鲁棒性问题。应用非线性动态逆的目的就是对过失速机动飞行条件下高度非线性的飞机动力学进行线化;从而围绕线性的快逆回路应用结构奇异值综合方法设计相应的鲁棒控制器,以提供对驾驶员指令的鲁棒跟踪。所设计的飞控系统将达到期望的飞行品质,确保系统对过失速机动飞行过程中因非定常气动力效应引起的系统参数摄动鲁棒性良好。高逼真度、非线性的仿真验证了这一点。     

基于遗传算法的无人机协同侦察航路规划

无人机将成为侦察卫星、有人驾驶侦察机的重要补充与增强手段 ,成为未来战场上广泛应用的一种侦察工具。为了提高无人机 (UAV)的侦察效率 ,在执行侦察任务前必需规划设计出高效的无人机侦察飞行航路。针对这一问题 ,本文提出了一种侦察效率指标评估的计算方法 ,解决了航路规划中的侦察效率量化问题。考虑在大范围任务区域内进行侦察航路优化存在计算的复杂性和收敛性等问题 ,本文采用遗传算法对侦察航路进行了优化处理。通过该方法得到的侦察航路可以有效地提高无人机的侦察效率。     

分区和有限容积法计算长尾喷管中的湍流流动

为了给长尾喷管热防护结构设计提供热边界条件，从轴对称二维雷诺平均N－S方程出发，采用分区算法和有限容积法计算了长尾喷管中的湍流流动，分析了流场的结构特性，提出了长尾喷管中燃气温度，压强和马赫数分布的某些规律以及燃气温度沿壁面的分布，计算和分析结果提出了长尾喷管热防护结构设计应注意的事项。     

环型超声速空气引射器零二次流流场数值研究

采用二维轴对称雷诺平均方程和标准κ-ε双方程湍流模型，数值研究了环型超声速引散器零二次流的流场结构及盲腔压强的变化，空间上采用二阶迎风格式进行耦合求解，时间上采用显示的Runge-Kutta方法进行迭代推进。结果表明，引射器几何参数不变的情况下，启动后的盲腔压强与引射气流总压之比为一常数；喷管马赫数不变情况下，喷管出口面积与混合室入口面积比越小，盲腔压强越低，扩压器性能越好，启动要求的总压越低，对超声速空气引射器的设计具有指导意义。