基于自动有限元建模的民机机翼结构布局优化

针对民用飞机中广泛采用的双梁式机翼结构,以机翼结构纵向构件(长桁)和横向构件(翼肋)的数量为参数生成机翼CAD模型,然后基于Patran的PCL(Patran Command Language)语言,根据整体模型分割、局部模型编号、局部网格控制、整体有限元生成的思路,实现了以纵向和横向构件的数量变化为基础自动进行机翼结构有限元模型的构建及分析,并将上述流程集成到机翼结构的布局优化中.最后参照某大型民用飞机的机翼外形尺寸建立了CAD模型,以机翼的静强度、刚度和蒙皮稳定性为约束,以机翼结构质量最低为目标,对上、下蒙皮长桁和翼肋数量进行了优化.优化后的布局使机翼结构质量降低了10.1%,表明了布局优化方法的有效性和可行性.     

Powered-descent trajectory optimization scheme for Mars landing

This paper presents a trajectory optimization scheme for powered-descent phase of Mars landing with considerations of disturbance. Firstly, θ–D$\theta ''–''D$ method is applied to design a suboptimal control law with descent model in the absence of disturbance. Secondly, disturbance is estimated by disturbance observer, and the disturbance estimation is as feedforward compensation. Then, semi-global stability analysis of the composite controller consisting of the nonlinear suboptimal controller and the disturbance feedforward compensation is proposed. Finally, to verify the effectiveness of proposed control scheme, an application including relevant simulations on a Mars landing mission is demonstrated.     

构架式空间可展开支撑臂

构架式空间可展开支撑臂在实现大尺寸高刚度航天器方面有着广泛的应用需求。文章论述了几种典型构架式空间可展开支撑臂的结构组成、工作原理和发展现状,从多个方面比较了不同类型构架式空间可展开支撑臂的特点,阐述了构架式空间可展开支撑臂发展趋势,指出球铰接杆式空间可展开支撑臂是适应大型化发展的空间可展开支撑臂主要发展方向,分析了实现球铰接杆式空间可展开支撑臂工程化尚需解决的关键技术。     

星载可展开天线热振动数值分析

根据非耦合动力学理论及有限元方法,研究分析了星载可展开天线的热振动。利用半正弦波温度冲击模拟热动力荷载,对天线典型节点的热振动位移和应力以及形面精度进行了数值分析。研究表明,急剧变化的温度荷载将导致该天线结构发生热振动,热振动响应明显大于静力学响应。     

测量时刻偏差对单星定轨误差的影响分析

为评估测量时刻偏差对单星定轨等效测量误差的影响,根据单星定轨处理策略分析了其理论模型,指出测站接收机的测量时刻偏差由测站时钟钟差以及测量时刻不准确度等组成。试验数据分析表明,测站钟差经一阶多项式拟合后的残差可近似为零均值的测量噪声;数值仿真结果表明,卫星信号发射时刻1ms误差导致GEO、IGSO、MEO三种卫星的等效测距误差分别为006cm、40cm、80cm。     

月球精确软着陆最优标称轨迹在轨制导方法

为实现在月球表面期望的着陆点进行精确软着陆（PPL）,且满足燃耗最优性要求,基于提出的LIDAR目标点在轨自主选定的月球精确软着陆方案,对月球PPL最优标称轨迹在轨快速规划制导方法进行研究。首先针对月球PPL三维球体非线性轨道动力学模型,采用Legendre Gauss Lobatto伪光谱方法将轨迹优化的最优控制问题转化为非线性规划问题（NLP）,再利用SQP优化算法求解月球PPL最优标称轨迹,最后通过遗传算法对优化结果进行验证,并提出应用遗传算法提供SQP在轨规划初值数据库的方案。仿真结果表明了最优标称轨迹在轨规划方法的快速性和有效性。     

负压式平板型环路热管试验

为解决高热流密度电子器件的散热问题,设计了一套负压式铜 甲醇环路热管,其蒸发器设计成平板型。研究表明,该平板型环路热管具有较高的散热能力,能够在无重力姿态和重力姿态下顺利启动。当重力倾角分别为0°、18°和30°,热负荷为160W时,蒸发器壁面温度分别达到85.8℃、66.3℃和64.6℃。按照环路热管启动状态,其启动过程可分为3个阶段：加热阶段、预启动阶段和后启动阶段。在低热负荷区域,环路热管会出现温度波动现象。增大重力倾角,有利于降低蒸发器壁面温度和热阻。当重力倾角为30°,热负荷从10W递增到160W时,环路热管的热阻从4.97℃/W降低到0.39℃/W。     

Low-dose carbon ion irradiation effects on DNA damage and oxidative stress in the mouse testis

To investigate the effects of low-dose carbon ion irradiation on reproductive system of mice, the testes of outbred Kunming strain mice were whole-body irradiated with 0, 0.05, 0.1, 0.5 and 1 Gy, respectively. We measured DNA double-strand breaks (DNA DSBs) and oxidative stress parameters including malondialdehyde (MDA) content, superoxide dismutase (SOD) activity, and testis weight and sperm count at 12 h, 21 d and 35 d after irradiation in mouse testis. At 12 h postirradiation, a significant increase in DNA DSB level but no pronounced alterations in MDA content or SOD activity were observed in 0.5 and 1 Gy groups compared with the control group. At 21 d postirradiation, there was a significant reduction in sperm count and distinct enhancements of DSB level and MDA content in 0.5 and 1 Gy groups in comparison with control. At 35 d postirradiation, the levels of DNA DSBs and MDA, and SOD activity returned to the baseline except for the MDA content in 1 Gy (P < 0.05), while extreme falls of sperm count were still observed in 0.5 (P < 0.01) and 1 Gy (P < 0.01) groups. For the 0.05 or 0.1 Gy group, no differences were found in DNA DSB level and MDA content between control and at 12 h, 21 d and 35 d after irradiation, indicating that lower doses of carbon ion irradiation have no significant influence on spermatogenesis processes. In this study, male germ cells irradiated with over 0.5 Gy of carbon ions are difficult to repair completely marked by the sperm count. Furthermore, these data suggest that the deleterious effects may be chronic or delayed in reproductive system after whole-body exposure to acute high-dose carbon ions.     

航空航天仿真试验假人研制

介绍了国内航空仿真试验假人的功能要求和研制状况,将研制工作分为人体参数测量、机械结构、信号采集与处理和可靠性验证4个部分进行.重点阐述了仿真试验假人的骨架、关节和皮肤肌肉的材料选择及结构设计特点.传感测试能力可输出记录64路生理信号,整体性能接近美国军用假人ADAM的水平,为高危的载人航空航天装备动态性能试验测试提供了有效工具.     

捻度对缝合线浸润特性的影响

研究不同捻度缝合线的浸润效果,通过SEM(扫描电子显微镜)观察不同捻度缝合线浸润树脂后的尺寸及其与树脂界面结合情况.研究结果表明:随着缝合线捻度的增加,树脂浸润缝合线的效果变差,缝合线纤维束及单丝与树脂结合情况变差;浸润树脂后的缝合线纤维束尺寸相对浸润之前提高,但随着捻度的增加,浸润树脂后的缝合线纤维束尺寸降低.