Effect of sodium tartrate concentrations on morphology and characteristics of anodic oxide film on titanium alloy Ti–10V–2Fe–3Al

The effect of sodium tartrate concentrations on morphology and characteristics of ano-dic oxide film on titanium alloy was investigated. The alloy substrates were anodized in different concentration solutions of sodium tartrate with the addition of PTFE emulsion and their morphol-ogy and characteristics were analyzed. The anodic oxide film presented a uniform petaloid drums and micro-cracks morphology. Additionally, micro-cracks dramatically swelled with the increase of the tartrate concentrations. The thickness of the anodic oxide film increased with the concentra-tions until the concentration reached 15 g/L. The results of Raman analysis illustrate that all sam-ples have similarity in the crystal structure, consisting of mainly amorphous TiO2, some anatase TiO2 and a small amount of rutile TiO2. And the ratios of anatase TiO2 and rutile TiO2 increase with the concentrations until it reaches 15 g/L. Furthermore, the intensity of the peaks increases with enhanced concentrations until the concentration reaches 15 g/L. The corrosion resistance of the anodic oxide film is increased by the sodium tartrate with higher concentrations before 15 g/L. The coefficient of friction of the anodic oxide film reduces with the concentrations until the concentration reaches 15 g/L, then the coefficient of friction of the anodic oxide film increases with the concentrations.     

嵌入式多核操作系统确定性研究

为解决嵌入式多核操作系统确定性问题,详细阐述了计算确定性,重点分析了多核结构引入的不确定性问题。通过研究嵌入式多核操作系统的结构,从共享存储的确定性访问、确定性任务调度、确定性通信等方面提出了解决多核结构带来的不确定性问题的方法。     

DOA estimation and mutual coupling calibration with the SAGE algorithm

In this paper, a novel algorithm is presented for direction of arrival（DOA） estimation and array self-calibration in the presence of unknown mutual coupling. In order to highlight the relationship between the array output and mutual coupling coefficients, we present a novel model of the array output with the unknown mutual coupling coefficients. Based on this model, we use the space alternating generalized expectation-maximization（SAGE） algorithm to jointly estimate the DOA parameters and the mutual coupling coefficients. Unlike many existing counterparts, our method requires neither calibration sources nor initial calibration information. At the same time,our proposed method inherits the characteristics of good convergence and high estimation precision of the SAGE algorithm. By numerical experiments we demonstrate that our proposed method outperforms the existing method for DOA estimation and mutual coupling calibration.     

航空发动机离心式喷嘴宏观喷雾特性

为探究航空发动机离心式喷嘴的喷雾宏观特性,通过将该喷嘴在高温高压定容弹中进行喷雾过程的实验,并结合阴影法与纹影法进行光学测量.首先以水作为射流工质,观察不同喷射压力下水进入大气环境中的雾化角变化,发现喷嘴结构对雾化角有着重要影响,最大雾化角与喷嘴出口的导流结构夹角相等.其次以正癸烷作为工质,通过不同环境压力和温度下的多...     

基于自适应代理模型的结构动力可靠度分析方法

结构动力可靠度分析对于衡量结构的安全状态和工作性能具有重要的指导意义。采用一种同时考虑 动态激励载荷和材料力学性能参数随机性的动力可靠度计算高效方法,通过建立不确定性材料力学性能参数 与条件动力可靠度之间的 Kriging代理模型,推导动力可靠度的解析表达式;提出一个新的学习函数来构建自 适应的 Kriging代理过程,通过复合材料飞行器蒙皮骨架结构在随机振动载荷和随机材料力学性能参数共同作 用下的动力可靠度分析对所提方法的准确性与高效性进行验证。结果表明:所提方法不仅能够避免使用代理 模型对动力可靠度求解时由于使用数值积分所引入的误差,同时能够使用尽可能少的计算成本获得准确的动 力可靠度结果。     

民用飞机救生筏储存箱结构设计思路探讨

民用飞机的救生筏是飞机应急着陆时使用的一种救生设备,需要有专门的储存箱来存放。详细地阐述了救生筏安装的适航要求,同时结合具体型号,以客舱天花板式储存箱为例,对救生筏储存箱的设计思路进行了探讨,并对其进行了人机功效分析。     

应用傅里叶时间谱方法求解二维跨音速流动问题解的精度研究

为了从时间离散精度的角度评估傅里叶时间谱方法的实际计算效率,对用该方法求解二维跨音速流动问题的解进行了精度研究。通过求解Euler方程模拟俯仰振动NACA0012翼型的周期性非定常流动。结果表明:傅里叶时间谱方法可以使用很大的时间间隔较为准确地模拟有激波存在的周期性跨音速流动;对于此类流动问题,相比二阶向后差分公式法,傅里叶时间谱方法在预测翼型表面压力系数积分量特别是升力系数的时间变化规律方面具有明显的计算效率优势;用于模拟翼型表面压力系数自身的时间变化规律时,傅里叶时间谱方法具有不低于二阶向后差分公式法的计算效率。     

四发螺旋桨滑流对某运输机气动特性的影响研究

四发螺旋桨飞机滑流影响区较大,需要准确获得滑流引起的升力、阻力和俯仰力矩特性的变化以评估飞机的飞行性能和品质.采用动力模拟风洞实验研究某运输机在滑流影响下的气动力特性,包括升阻特性、俯仰力矩特性和升降舵效率,并采用七孔探针技术测量平尾区的尾流场特性.结果表明:滑流对气流加速的效应使得飞机的升力、阻力均有增加,升阻比在典型巡航和爬升状态下分别降低了6％和20％;滑流随迎角的增加从下至上扫掠过平尾,使得俯仰力矩和升降舵效率出现明显的非线性变化.     

An experimental system for release simulation of internal stores in a supersonic wind tunnel

Aerodynamic parameters obtained from separation experiments of internal stores in a wind tunnel are significant in aircraft designs. Accurate wind tunnel tests can help to improve the release stability of the stores and in-flight safety of the aircrafts in supersonic environments.A simulative system for free drop experiments of internal stores based on a practical project is provided in this paper. The system contains a store release mechanism, a control system and an attitude measurement system. The release mechanism adopts a six-bar linkage driven by a cylinder, which ensures the release stability. The structure and initial aerodynamic parameters of the stores are also designed and adjusted. A high speed vision measurement system for high speed rolling targets is utilized to measure the pose parameters of the internal store models and an optimizing method for the coordinates of markers is presented based on a priori model. The experimental results show excellent repeatability of the system, and indicate that the position measurement precision is less than0.13 mm, and the attitude measurement precision for pitch and yaw angles is less than 0.126°, satisfying the requirements of practical wind tunnel tests. A separation experiment for the internal stores is also conducted in the FL-3 wind tunnel of China Aerodynamics Research Institute.     

铌掺杂ITO镀膜玻璃电磁散射特性试验

座舱玻璃镀膜是实现飞行器隐身技术的重要途径之一。利用雷达散射截面(RCS)均值增益研究铌掺杂ITO镀膜玻璃隐身性能;针对不同方块电阻的铌掺杂ITO镀膜玻璃,进行系列化RCS暗室测试,分析不同入射频率、极化方式的电磁散射特性。结果表明:方块电阻增大时电磁散射减弱,合适的方块电阻(小于40Ω/m~2)有利于实现座舱外形隐身,散射特性与金属接近,频率较高时,镜面散射波峰较窄。