Novel AC line conditioner for power factor correction

A new ac line conditioner is presented for high input power factor and clean ac output voltages for isolating the linear or nonlinear loads. A three-phase two-leg switching mode rectifier with neutral-point-clamped topology is proposed to draw the sinusoidal line currents from the ac mains. The carrier-based current controller is used in the inner control loop to track the line current commands with unity power factor. The dc bus voltage controller is adopted in the outer control loop to regulate the dc-link voltage. A voltage compensator is used to balance the neutral point voltage on the dc tank. A three-phase two-leg inverter with neutral-point-clamped topology is adopted in the system to provide the clean ac output voltages to the critical or sensitive loads. The carrier-based current control scheme is adopted to improve the instantaneous output voltages. Experimental results show the validity and effectiveness of the proposed control strategy.     

基于旋转机械故障诊断模糊神经网络多传感器融合(英文)

目前多传感器融合技术能够有效地提高精度和容错能力 ,所以它广泛应用于目标识别领域中。本文描述了一种基于旋转机械故障诊断多传感器融合系统 ,在数据融合处理中利用模糊神经网络 ,比较了采用基于数据融合实验结果和没有融合的原始数据 ,显然前者比后者更精确。     

著作权集体管理制度若干问题的研究

著作权集体管理组织应是不以营利为目的的民间团体,其管理的权利范围应仅限于著作权中的财产权利,著作权集体管理组织与著作权人或者与著作权有关的权利人之间在法律关系上一般是一种信托关系。在我国,建立和完善著作权集体管理组织是著作权法律制度对作品传播的市场份额进行合理分配、从而实现作者利益与社会公众利益间平衡的必由之路。     

交互绘图软件（MTSCAD2.0）开发中的深层次问题研究（2）

本文进一步介绍图形编辑和几何交切方面的程序设计的经验，如图形的映射、平移和旋转，交互绘图时常用到的九种几何交切的有关内容。用实例来说明程序设计原理和方法。     

Measurements of low energy electrons and ions during long-lived solar particle events

Following a solar flare in April 1979, a stream of ions and electrons appeared in interplanetary space for about 8 days. The ions follow a classic ESP pattern. Large fluxes of low energy (2–11 keV) electrons are also present throughout the event. Several distinct populations of these electrons can be identified in association with filaments of interplanetary magnetic field. The electron energy spectrum is remarkably well fit by a power law exponent -2.7 during most of the event.The pitch angle distribution of the low energy electrons are complex and undergo many changes. Weak pitch angle scattering and adiabatic effects play a role in shaping these distributions. The low energy electron fluxes increase following the strong interplanetary shock on 5 April 1979.An invited paper presented at STIP Workshop on Shock Waves in the Solar Corona and Interplanetary Space, 15–19 June, 1980, Smolenice, Czechoslovakia.Physics Department and Space Sciences Laboratory.Space Sciences Laboratory.     

Error analysis of quaternion transformations [inertial navigation]

Three transformation formulas that relate the quaternions to the direction cosine matrix used in strapdown inertial systems are derived. An error model associated with the computed direction cosine matrix is briefly discussed. Error analysis is fully evaluated analytically and tabulated for comparison. Transformation errors associated with these formulas are analyzed. The drift errors evaluated under constant angular velocity are shown to vary slightly among three different transformations. It is shown that the skew errors in three transformation schemes are not all intrinsically zero. The scale errors may differ largely by two orders of magnitude among transformation schemes. This may become a criteria for selection of altitude transformation schemes     

航天器交会最终逼近段相对姿态估计与控制

对航天器交会对接最终逼近段,给出姿态运动学方程统一形式以及相对姿态动力学方程;除了应用交会航天器的绝对姿态运动方程进行相对姿态估计(间接法)外,还直接应用相对姿态运动方程进行相对姿态估计(直接法);阐述相对姿态控制的相平面法与四元数反馈法的设计方法.相平面控制法应用常值推力,针对小姿态角机动的特点,将相对姿态通道解耦为3个独立的二阶子系统,设计相平面推力方向切换函数;四元数反馈法应用简化的基于本征轴旋转的线性二阶系统,选择相对四元数与角速率反馈增益系数,确定控制力矩.此外,对相对姿态估计与控制方法进行模拟计算与比较.理论分析与模拟计算结果表明:应用扩展Kalman滤波的相对姿态间接估计法与直接估计法是有效的,后者有可能简化估计算法;相平面控制法与四元数反馈法均可有效实现相对姿态控制,前者应用常值推力(推力方向与姿态反馈有关),较易实现,但动力消耗较大,后者按控制力矩随姿态反馈量而变,动力消耗较小.      

发动机FADEC中微处理系统故障检测

本文提出了一种用于航空发动机全权限数字电子控制 (FADEC)中微处理系统的加电自检 (POST)方法。研究了 Hamming编码对航空发动机 FADEC中信息的故障检测和校正方法, 对微处理系统中的 RAM存储器故障检测以及 Hamming编码的故障检测和纠错能力分别进行了模拟实验。      

刚体元在有限分析中的特殊应用

本文论述了刚体元在有限元分析中作为传力结构的特殊用法,并针对其使用时出现的问题一一作了详细分析。最后,探讨了刚体元在模型简化中的应用。     

压力服受力层强度研究

以薄壁压力容器强度计算理论为基础,对原料、织物组织结构、裁剪、缝合工艺及环境等影响压力服受力层强度的相关因素,进行了科学分析与大量试验研究。为压力服受力层织物的选择,加工制作工艺的确定及适宜使用环境等,给出了明确的研究结论,为保障压力服受力层的研制及加压时具有良好的安全性奠定了基础。