Inter-satellite calibration of FengYun 3 medium energy electron fluxes with POES electron measurements

We perform an L-shell dependent inter-satellite calibration of FengYun 3 medium energy electron measurements with POES measurements based on rough orbital conjunctions within 5?min?×?0.1?L?×?0.5 MLT. By comparing electron flux data between the U.S. Polar Orbiting Environmental Satellites (POES) and Chinese sun-synchronous satellites including FY-3B and FY-3C for a whole year of 2014, we attempt to remove less reliable data and evaluate systematic uncertainties associated with the FY-3B and FY-3C datasets, expecting to quantify the inter-satellite calibration factors for the 150–350?keV energy channel at L?=?2–7. Compared to the POES data, the FY-3B and FY-3C data generally exhibit a similar trend of electron flux variations but more or less underestimate them within a factor of 5 for the medium electron energy 150–350?keV channel. Good consistency in the flux conjunctions after the inter-calibration procedures gives us certain confidence to generalize our method to calibrate electron flux measurements from various satellite instruments.     

A scheduling strategy to inter-satellite links assignment in GNSS

By introducing inter-satellite link (ISL), the dependence of the global navigation satellite system (GNSS) on ground infrastructure can be reduced and its performance enhanced via inter-satellite ranging and communication. Owing to platform restrictions, there are usually fewer onboard Ka-band ISL antennas than the number of visible satellites, which poses a problem when optimizing the inter-satellite links assignment of the GNSS. In this study, to optimize inter-satellite ranging and communication, a multi-objective optimization model is built and a scheduling strategy is proposed for the inter-satellite links assignment scheduling problem. The position dilution of precision (PDOP) of links and the transmission time-delay of telemetry data are set as the ranging performance and communication metrics, respectively. We regard the links assignment in each slot as a general graph-matching problem, and apply the Blossom algorithm to obtain the maximum matching. We then generate and optimize the satellite sequences for whole slots using non-dominated sorting genetic algorithm II (NSGA-II). The simulation scenes include 10,080 epochs of GNSS constellation, and the simulation results show that the performance of the proposed strategy is better than that of other methods published recently, and can provide various solutions to meet the different preferences of system managers.     

数字科氏质量流量计闭环系统及信号解算

在科氏质量流量计测量系统设计中,提出一种数字式信号处理、解算的全新设计思路.采用高速并行模拟数字转换电路(A/D)将传感器输出的信号完整采样,借助数字信号处理芯片(DSP, Digital Signal Processor)强大运算能力对信号进行深入的分析与处理;利用信号处理方法对信号进行实时滤波处理并精确计算两路信号的相位差,进而解算出流体的质量流量和密度,辅以单片机和现场可编程器件(FPGA, Field Programmable Gate Array)实现系统的控制、显示与通讯;提出谐振电路的数字式闭环设计新思想,利用数字电路及其信号处理方法实现传统的闭环增益控制(AGC, Auto Gain Control).实验结果表明:该系统有效提高了测量系统的零点稳定性和测量精度.     

高职院校二级学院体制下的科研管理研究

基于高职院校二级学院科研管理体制,分析科研活动中院校领导、二级学院领导、科研项目负责人、教师个体研究者和院校科研管理机构不同角色的职责和使命,提出二级学院为科研管理主体,以重点学科发展需求为导向,以科研项目申报为抓手的科研管理思路,实现提高科研管理水平,创造良好的科研环境的目的。     

A novel stability prediction approach for thin-walled component milling considering material removing process

The milling stability of thin-walled components is an important issue in the aviation manufacturing industry,which greatly limits the removal rate of a workpiece.However,for a thin-walled workpiece,the dynamic characteristics vary at different positions.In addition,the removed part also has influence on determining the modal parameters of the workpiece.Thus,the milling stability is also time-variant.In this work,in order to investigate the time variation of a workpiece's dynamic characteristics,a new computational model is firstly derived by dividing the workpiece into a removed part and a remaining part with the Ritz method.Then,an updated frequency response function is obtained by Lagrange's equation and the corresponding modal parameters are extracted.Finally,multi-mode stability lobes are plotted by the different quadrature method and its accuracy is verified by experiments.The proposed method improves the computational efficiency to predict the time-varying characteristics of a thin-walled workpiece.     

基于Walsh变换的伪码快速捕获算法

本文针对空间探测的背景,利用单FPGA作为潜在处理平台,介绍了基于Walsh变换的位码快速捕获方法,并与滑动相关、FFT捕获算法进行了比较.仿真和分析结果表明基于Walsh变换的伪码快速捕获算法比FFT捕获算法捕获时间更短,占用资源更少,但是无法根本提高信号捕获的抗干扰能力,在非深空探测中具有良好的应用前景.     

一种天线主面分瓣连接件的设计

设计了一种天线主面分瓣连接件,介绍了该装置的工作原理及工作过程,通过分析、比较,表明该装置动作明确、定位简单准确且夹紧可靠,是一种较好的设计.     

涂覆焊技术在航空发动机受感部 安装中的应用研究

为满足发动机测试技术发展的需求,解决发动机测试改装和安装带来的流场扰动问题,分析了设备参数对涂覆焊效果的影响,开展了涂覆焊技术的应用研究,获取了可靠的测试数据,从而实现了发动机测试受感部的埋设式安装,避免了测试对发动机气动性能的影响,保证了发动机结构的气密性,保障了后续试验试车的效果和发动机的安全性。     

执行器故障的挠性航天器姿态滑模容错控制

针对挠性航天器执行器卡死与失效故障的姿态稳定控制问题,提出一种改进型滑模容错控制策略.与传统的滑模控制相比,该方法能削弱传统滑模控制中抖振现象对姿态控制精度的影响,且它采用自适应技术在线估计系统中的不确定参数,从而保证控制性能对外部干扰、不确定甚至时变转动惯量具有良好的鲁棒性.该控制器并不需要任何在线或离线的故障信息,...     

基于Fuzzy ARTMAP的GPS/INS组合导航系统故障诊断

将基于双状态传播器的状态χ2检验法(SCST)结合Fuzzy ARTMAP神经网络应用于GPS/INS紧组合导航系统故障的诊断和参数识别。首先,采用双状态传播器的状态χ2检验法对组合导航系统进行故障检测,得到故障的特征模式,并给出了双状态传播器重置时间间隔选择的充分条件;然后,利用Fuzzy ARTMAP神经网络结合特定的飞行器机动对故障模式进行分类,给出了一种新的分类方法;对于飞行器按照不同轨迹进行飞行的情况,也可有效的识别故障源。最后将分类的结果送入另一个Fuzzy ARTMAP神经网络进行故障参数的估计。仿真结果表明,针对组合导航系统中陀螺、加速度计、GPS信号的一度故障,此方法能有效进行检测和隔离,并能准确估计出故障发生时间和故障幅值。