封头补强技术研究

研究了碳纤维／环氧复合材料φ１５０ｍｍ和φ４８０ｍｍ压力容器封头的局部补强方法和工艺，试验结果表明：φ４８０ｍｍ压力容器经在大金属件边缘补强后改变了水压爆破时金属件飞出的现象，纤维强度得以充分发挥而使筒身段纵环向同时破坏；φ１５０ｍｍ压力容器的应力平衡系数可由０．７５提高到０．８５以上，筒身段纵向纤维发挥强度由２０９０ＭＰａ提高到２３３６ＭＰａ，提高约１１．８％。由此可见，壳体铺层设计与封头补强巧妙地结合是壳体优化设计的重要方法，是充分发挥纵向纤维强度的有效措施。     

Changes in organ perfusion and weight ratios in post-simulated microgravity recovery

Head-down tilt models have been used as ground-based simulations of microgravity. Our previous animal research has demonstrated that there are significant changes in fluid distribution within 2 h after placement in a 45 degrees head-down tilt (45HDT) position and these changes in fluid distribution were still present after 14 days of 45HDT. Consequently, we investigated changes in fluid distribution during recovery from 16 days of 45HDT. Changes in radioactive tracer distribution and organ/body weight ratio were examined in rats randomly assigned to a 45HDT or prone control group. The 45HDT rats were suspended for 16 days and then allowed to recover at the prone position 0, 77, 101, or 125 h post-suspension. Animals were injected with technetium-labeled diethylenetriamine pentaacetate (99mTcDTPA, MW=492 amu, physical half-life of 6.02 h) and then killed 30 min post-injection. Lungs, heart, liver, spleen, kidneys, and brain were harvested, weighed, and measured for radioactive counts. Statistical analyses included two-way analysis of variance (ANOVA) that compared 45HDT versus controls at the four experimental time points. The organ weight divided by the body weight ratio for the brain, heart, kidneys and liver in the 45HDT rats was significantly different than the control rats, regardless of time (treatment). There was no difference between the different time points (time). The average 99mTcDTPA count divided by the organ weight ratio values for the heart, liver, and spleen were significantly higher in the 45HDT group than the control group. The average counts for the heart and spleen were significantly higher at 77, 101, and 125 h than at time zero. We conclude that the major organs have different recovery patterns after 45HDT for 16 days in the rat.     

预变形电场时效对1420Al-Li合金组织和性能的影响

本文研究了预变形电场时效对１４２０Ａｌ－Ｌｉ合金组织和性能的影响。     

微型多路 PCM 遥测编码器的设计

针对遥测系统愈来愈小的重量和体积的要求，介绍遥测系统发送端ＰＣＭ遥测编码器的几种实现方法，并对某遥测系统的ＰＣＭ编码器采用了数字逻辑电路来实现，详细介绍其设计思路及过程。设计的编码器，全部控制电路由一片可编程逻辑器件（ＰＬＤ）来完成，减小了电路板的面积。     

CAD／CAE技术在工艺装备设计中的应用

在镜头的机床定心加工中，过渡环的刚度和质量是影响定心加工精度的主要因素，文章在分析过渡环在加工中的受力情况的基础上，使用Pro／E进行三维造型，使用PATRAN建立有限元模型，使用NASTRAN进行结构静力分析和模态分析，然后根据分析结果优化结构质量。     

基于HLA的网络对抗系统建模与仿真

介绍了HLA的基本思想,分析了网络对抗仿真系统,给出了网络对抗系统的层次模型以及基于HLA-RTI的实现方法。     

对我校图书馆数字化的建议

1校图书馆数字化建设的现状我校图书馆属大专院校中小型图书馆,自96年添置设备进行计算机管理以来,引进了深大的图书馆研制的图书管理系统,初步实现了采购、编目、查询、借阅的网络操作,并与一些数图公司购买数字资源、建立了远程链接,另外,图书馆建立电子阅览室后,更为读者网上浏览提供了广泛空间。当然,我校图书馆,基于经济实力与技术力量及其他种种条件的限制,远远达不到数字图书馆的要求与功能。例如,目前我们的馆藏实物图书采购还不能实现真正意义上的网上采购,外购所需耗费的人力和相关资金对于我们这样一个中小型图书馆来说仍然是个…     

空间光学精密展开机构展开方法的初步探讨

文章对空间光学精密展开机构(以下简称展开机构)进行分类,分析了几种典型可展开空间光学系统的展开方法和特点。讨论了展开机构设计需要考虑的主要因素,并给出设计建议。     

一种高速低噪声信号处理电路的方案研究

文章针对中国遥感高分辨率传输型相机的发展趋势，提出了一种高速低噪声的遥感CCD相机信号处理电路的设计方案。从信号完整性理论出发，利用Cadence软件进行了仿真与验证，取得了良好的效果。