备件配置方法研究

针对电路板件故障数据记录的实际,运用可靠性理论,提出了没有故障数据板件的备件数量计算方法;对有故障统计数据的板件引用了经验模型来确定备件配置。     

A bistatic SAR mission for earth observation based on a small satellite

The authors present a new scientific space mission consisting of a satellite carrying a receiving- only SAR which receives the signal transmitted by the ENVISAT-1 SAR. The integration of ENVISAT-1 SAR and bistatic radar data offers an improved potentiality of surface classification, three-dimensional observation, and the opportunity of advanced scientific experiments in the field of bistatic scattering. The small satellite nominal orbit and the attitude manoeuvres are designed in order to maintain an adequate overlap between the two radar swaths along the whole orbit, taking into account the ENVISAT-1 attitude and pointing. A preliminary satellite design (2-year lifetime) is then performed to evaluate the orbit decay and to determine the appropriate orbit manoeuvres (every 4 days) to control the satellites relative phase. The numerical simulation shows that a spacecraft of about 584kg is able to meet the mission requirements.     

GPS based onboard and onground orbit operations for small satellites

In extension to common applications such as groundtrack displays and antenna steering, the SGP4 orbit model is proposed for operational orbit determination in small satellite missions. SGP4 is an analytical orbit model for Low-Earth orbiting satellites that is widely used for the propagation of NORAD twoline elements. Twoline elements may hence be generated completely independent of NORAD. Their use as exclusive source of orbital information simplifies the operations concept and reduces mission costs through the extensive use of existing low-cost mission support software. Due to small computer resource requirements of 8–10kByte, the SGP4 model may also be applied for onboard orbit computations making use of e.g. a 80186 processor, thus ensuring full compatibility of ground-based and onboard operations. The proposed approach is particularly suited in combination with a space-borne GPS receiver, were the C/A-code navigation solutions are treated as measurements that are adjusted in a least-squares sense using the SGP4 model. As consequence, inherent drawbacks of the pure navigation solutions such as data gaps and scatter as well as limited velocity accuracy are avoided, while the operational navigation activities are kept at a minimum. The feasibility of the concept is illustrated based on real GPS navigation data from the TOPEX/Poseidon and the MIR space station with an inherent data quality of 50–100 m. It is shown that 3 hours of data within a 4 day period are sufficient to keep the position error within 4 km, that is considered sufficient for most applications.     

k-ε-g紊流燃烧模型数值研究

本文对k-ε-g紊流燃烧模型中模型系数C_R,C_(g1),C_(g2)的选定和计算浓度脉动均方值g的不同方法进行数值研究。计算结果表明模型系数值的选定直接与化学反应速率有关,而其中C_R影响最大。g的计算虽然可有不同方法,而其中微分方程求解最佳。并用实验数据来验证计算结果。     

摩擦塞焊研发与关键问题

如果将搅拌摩擦焊认定为铝合金焊接上的一场革命,摩擦塞焊则是铝合金补焊工艺上一次质的飞跃。文章阐明了摩擦塞焊的工作原理,详细论述该工艺的发展、研发中出现的几个关键问题和解决途径。     

基于PCI总线的石英晶体元件电参数测试仪

首先介绍PCI总线控制专用芯片S5920的组成,Mailboxs、FIFO、Pass-Thru的基本概念、性能和使用方法。其次介绍测量石英晶体元件参数的阻抗计法和π网络法。对基于PCI总线控制器S5920为核心的π网络法石英晶体元件电参数测试仪的设计和实现作了说明。该方法测量的频率可达2005MHz。利用GPs高精度的授时信号作为频率校准信号校准信号源的精度。     

多重直扩信号的快速捕获

多重直扩信号的快速捕获得卫星定位及通信系统研制过程中遇到的一个主要课题，它的实现，不仅可以提高系统的多址能力，而且也是系统实现的必备条件，本文阐明了多重直扩信号的来源以及可被分离的理论依据，给出了多重直扩信号快速捕获的硬件实现方案及部分实验结果，得出了一些重要结论。     

利用秩统计方法确定不完全S-N数据的p-S-N曲线

本文依据结构不同可靠度下的S—N曲线形状参数相同的观点，利用复合材料结构的不完全S—N数据，得到一组不完全疲劳极限数据，并采用秩统计方法，求得结构的p—S—N曲线，最后，给出了两个应用实例，通过对比分析了本文方法与假定完全寿命法的处理结果，发现本文方法充分利用了数据信息，能给出更好的疲劳性能。     

铝合金定向凝固过程枝晶生长的相场法模拟

本文基于Wang等人提出的熵函数公式。在假定平衡时同液界面处固、液相的化学势相同而溶质浓度不同的基础上。推导了一个新的二元合金相场模型。并利用该相场模型与溶质场进行耦合计算，以Al-4．5％Cu合金为例模拟了二元台金等温凝固定向凝固的枝晶生长过程。研究了在正温度梯度情况下二元合金过冷熔体中的等轴枝品和柱状晶的生长过程及其溶质场的分布情况。     

导弹防御系统的弹道导弹突防

根据美国国家导弹防御系统(NMD)的防御特点，提出了弹道导弹突防的以核攻核、近距离攻击和攻击天基信息链，以及饱和式多波次攻击、电磁脉冲弹头、机动发射平台、多弹头和单弹头突防等不同的战略战术，并分析了采用的不同弹头、释放有源或无源干扰物、隐身和反探测、助推段机动，以及旋转导弹和弹头等技术。