基于支持向量机的涡扇发动机起动性能估算研究

针对不同大气条件尤其是高原和高、低温条件,及不同起动机和负载扭矩特性下涡扇发动机起动过程的数值模拟问题,给出了通用起动模型状态空间描述形式,研究了基于支持向量机的起动模型辨识和起动性能仿真方法。以某型涡扇发动机为例,给定某些条件下的起动试验数据,采用模型逐次递推的方式,估算了其它条件下的起动性能。提出的方法能够保证估算结果的准确度,适合于工程应用。     

WSO／UV（世界空间紫外天文台）的轨道特征与轨道保持

WSOO／UV(世界空间紫外天文台)需要发射到日-地(月)系的共线平动点L1附近进行巡天观测，相对日-地(月)要求其几何位置几乎不变，因此有必要阐明共线平动点的动力学特征及其附近的运动状况。本文基于这一点，对限制性三体模型下，日-地(月)系中共线平动点附近扰动运动的稳定性作了理论分析，给出了WSO／UV轨道保持的条件及其在运行阶段的轨控措施。     

浅析现代战斗机翼-身接头的构造和连接形式

较详细分析了现代战斗机翼-身接头的构造和连接形式以及各种形式的优缺点和选择这些结构形式时的注意事项,并对现代战斗机翼-身接头形式未来的发展趋势作出预测。     

突跃型与平滑型斜爆震波起爆机制数值模拟

采用带有化学反应的Euler方程,对突跃型与平滑型2种形态的斜爆震波(ODW)在起爆机制和结构特点等方面的差异进行了研究.结果表明:斜激波(OSW)后是否存在亚声速区是判定斜爆震形态的依据.当波后火焰抬升斜激波面使得亚声速区存在时,横向激波与三波点结构就会出现并形成突跃型斜爆震.当波后所有区域皆为超声速区时,波后火焰燃烧无法影响到上游激波面,则会形成平滑型斜爆震.通过斜激波关系式给出了横向激波形成所需的临界斜激波角度,只有当斜激波角度大于此临界角度时才能形成突跃型斜爆震波,反之则形成平滑型斜爆震波.      

煤油燃料RBCC亚燃模态掺混与燃烧数值模拟研究

为了探索RBCC(Rocket Based Combined Cycle)亚燃模态条件下掺混燃烧性能,对多种工况进行了数值计算。对比分析了各工况下的燃烧室压力、掺混反应效率、总压损失等参数来分析燃烧室内部特性的变化。从数值模拟的研究中可以发现:由于RBCC亚燃模态的特点,一次火箭高温羽流,使得喷注的燃料能够有效地雾化蒸发,通过支板的混合增强作用能有效地提高煤油燃料的掺混能力,凹腔又适当的延长了煤油在燃烧室的停留时间,形成有效的火焰稳定区域,两种有效的火焰稳定方式的结合能实现液体燃料稳定有效的燃烧,而且双凹腔前后组合也能提高燃料的掺混燃烧能力。从计算中还可以发现,合理地布置支板与凹腔的相对位置能提高燃料的掺混反应效率,实现燃料的充分燃烧,并对燃烧性能提高有明显的帮助。     

Multi-mode diagnosis of a gas turbine engine using an adaptive neuro-fuzzy system

Gas Turbine Engines (GTEs) are vastly used for generation of mechanical power in a wide range of applications from airplane propulsion systems to stationary power plants. The gas-path components of a GTE are exposed to harsh operating and ambient conditions, leading to several degradation mechanisms. Because GTE components are mostly inaccessible for direct measurements and their degradation levels must be inferred from the measurements of accessible parameters, it is a challenge to acquire reliable information on the degradation conditions of the parts in different fault modes. In this work, a data-driven fault detection and degradation estimation scheme is developed for GTE diagnostics based on an Adaptive Neuro-Fuzzy Inference System (ANFIS). To verify the performance and accuracy of the developed diagnostic framework on GTE data, an ensemble of measurable gas path parameters has been generated by a high-fidelity GTE model under (a) diverse ambient conditions and control settings, (b) every possible combination of degradation symptoms, and (c) a broad range of signal to noise ratios. The results prove the competency of the developed framework in fault diagnostics and reveal the sensitivity of diagnostic results to measurement noise for different degradation symptoms.     

Global aerodynamic design optimization based on data dimensionality reduction

In aerodynamic optimization, global optimization methods such as genetic algorithms are preferred in many cases because of their advantage on reaching global optimum. However, for complex problems in which large number of design variables are needed, the computational cost becomes prohibitive, and thus original global optimization strategies are required. To address this need, data dimensionality reduction method is combined with global optimization methods, thus forming a new global optimization system, aiming to improve the efficiency of conventional global optimization. The new optimization system involves applying Proper Orthogonal Decomposition (POD) in dimensionality reduction of design space while maintaining the generality of original design space. Besides, an acceleration approach for samples calculation in surrogate modeling is applied to reduce the computational time while providing sufficient accuracy. The optimizations of a transonic airfoil RAE2822 and the transonic wing ONERA M6 are performed to demonstrate the effectiveness of the proposed new optimization system. In both cases, we manage to reduce the number of design variables from 20 to 10 and from 42 to 20 respectively. The new design optimization system converges faster and it takes 1/3 of the total time of traditional optimization to converge to a better design, thus significantly reducing the overall optimization time and improving the efficiency of conventional global design optimization method.     

Twistor-based synchronous sliding mode control of spacecraft attitude and position

A synchronous control of relative attitude and position is required in separated ultra-quiet spacecraft, such as drag-free, disturbance-free, and distributed spacecraft. Thus, a twistor-based synchronous sliding mode control is investigated in this paper to solve the control problem of relative attitude and position among separated spacecraft modules. The twistor-based control design and the stability proof are implemented using the Modified Rodrigues Parameter (MRP). To evaluate the effectiveness of the proposed control method, this paper presents a case study of separated spacecraft flying control considering the mass uncertainty and external disturbances. In addition, a simulation study of the Proportional-Derivative (PD) control is also presented for comparison. The results indicate that the twistor-based sliding mode controller can ensure global asymptotic stability. The states converge fast with ultra-precision and ultra-stability in both the attitude and position. Moreover, the proposed twistor-based sliding mode control system is robust to the mass uncertainty and external disturbances.     

Training effectiveness evaluation of helicopter emergency relief based on virtual simulation

Helicopters are playing an increasingly important part in emergency relief, such as earthquake rescue, firefighting and medical transport. With the development of virtual simulation technology, virtual simulation-based training is widely used in the training of the helicopter crew especially for the dangerous and costly missions mentioned above. A complete training effectiveness evaluation method is proposed to evaluate the trainees’ training effect based on virtual simulation in this paper. A key to this method is regarding the complicated process as a discrete event-activity flow system and establishing the evaluation indicator system. Then expert group and Analytical Network Process (ANP) are applied to determine the weight of indicators. When the training data are processed, there is a novel attempt to apply Fuzzy Comprehensive Evaluation (FCE) model to calculate the two categories of indicators. Eventually, an experiment and the analysis were carried out to validate the evaluation method.     

战斗机滚转姿态快速性研究

介绍了战斗机中等幅度滚转姿态快速性的定义，应用欧拉法对19种飞机构形的滚转快速性进行了仿真计算．其结果与地面模拟战斗机攻击机动试验相比较，表明滚转姿态快速性与滚转模态时间常数、滚转操纵效能、副翼操纵速率和控制系统增益等飞行品质要求密切相关，飞行品质标准MIL—STD—1797没有完全涵盖中等幅度滚转姿态变化的要求。