数模混合电路故障诊断的方法研究

结合目前数模混合电路测试的发展现状,对其故障诊断的理论进行了介绍,指出了各自的优点以及存在的缺陷,探讨了在实际中得到发展和应用的数模混合电路故障诊断技术,并预测了这些理论和技术今后的发展方向。     

国外航空涡扇发动机涡轮叶片热障涂层技术发展

介绍了美国等国家开发的航空发动机涡轮叶片热障涂层技术及其应用情况,并总结了该技术的发展动向,旨在为中国开展相关研究和应用工作提供参考和借鉴.     

用于微型涡轮机的节流孔式静压气浮轴承实验

对用于厘米级微型涡轮发动机的径向静压气浮轴承展开了实验研究,分析了长径比、节流孔径、气膜间隙及供气压力等对承载力、刚度和耗气量的影响.提出了这些设计参数的优选方法,并结合直径11 cm的某微型喷气发动机,给出了与之匹配的径向静压气浮轴承设计方案:工作面直径15 mm、长度17.5 mm、节流孔径0.35 mm、气膜间隙25μm.此方案在供气绝对压力2.5 kPa时,双轴承支撑能力为13.72 N,耗气量小于1.0 g/s,有效地满足了微型涡轮发动机要求.      

多斜孔冷却方式气动参数对壁温梯度和冷却效率的影响

针对高温升燃烧室以延长其火焰筒使用寿命为目的,实验研究了多斜孔冷却方式气动参数,如加温比、速度比和主流速度变化对主燃烧室火焰筒壁温梯度和冷却效率的影响.实验结果表明:减小加温比或增大速度比都可以减小壁温梯度的绝对值,同时冷却效率也会增加;当主流进入了自模区后,随着主流速度的增加,壁温梯度的绝对值会减小,冷却效率会增大.      

基于数值模拟的燃气舵轴向位置优化分析

为了优化燃气舵的安装位置,应用fluent软件对燃气舵三维湍流流场结构进行了分析,在此基础上就燃气舵安装位置对燃气舵流场的影响进行了数值模拟.通过数值模拟得到燃气舵在不同轴向位置、耳片长度和舵偏角下绕流流场的复杂波系结构,绘制了燃气舵在不同舵偏角下升力的变化曲线,给出了燃气舵可以提供的升力参量随舵偏角度变化的规律.通过分析,确定了燃气舵的轴向安装位置,数值模拟和实验结果相符.     

基于SoPC的嵌入式系统设计技术

介绍了Xilinx公司Virtex- 4 FX系列FPGA的特点,分析了该FPGA内嵌的PowerPC405处理器的体系结构及CoreConnect总线的特点.通过多路传输数据总线接口的设计实例,阐述了基于SoPC(System on Programmable Chip)的嵌入式系统设计方法.     

一种事件驱动型无线传感器网络的数据编码及融合算法

基于事件驱动的区域监测是无线传感器网络的一类典型应用,该网络中包括两种类型的数据,分别为对网络状态进行监控的周期性监测数据和事件发生时应传送的事件消息.基于簇结构,利用簇头和簇成员两种角色的节点,分别针对上述两种类型的数据提出不同的编码方式和对应的融合机制,同时详细分析了该编码方法和融合机制的优缺点.     

Area-oriented coordinated trajectory planning of dual-arm space robot for capturing a tumbling target

The growing amount of space debris poses a threat to operational spacecraft and the long-term sustainability of activities in outer space. According to the orbital mechanics, an uncontrolled space object will be tumbling, bringing great challenge to capture and remove it. In this paper, a dual-arm coordinated ‘‘Area-Oriented Capture"(AOC) method is proposed to capture a non-cooperative tumbling target. Firstly, the motion equation of the tumbling target is established, based on which, the dynamic properties are analyzed. Then, the ‘‘Area-Oriented Capture"concept is presented to deal with the problem of large pose(position and attitude) deviation and tumbling motion. An area rather than fixed points/devices is taken as the object to be tracked and captured. As long as the manipulators' end-effectors move to a specified range of the objective areas(not fixed points on the target, but areas), the target satellite will be hugged by the two arms.At last, the proposed method and the traditional method(i.e. fixed-point oriented capture method)are compared and analyzed through simulation. The results show that the proposed method has larger pose tolerance and takes shorter time for capturing a tumbling target.     

Comparative analysis of four different single-frequency PPP models on positioning performance and atmosphere delay retrieval

Single-frequency precise point positioning (SF-PPP) has attracted increasing attention due to its high precision and cost effectiveness. With various strategies to handle the dominant error, i.e., ionosphere delay, the ionosphere-float (IF), ionosphere-free-half (IFH), ionosphere-corrected (IC), and ionosphere-weighted (IW) SF-PPP models are certain to possess different characteristics and performance levels. This study is dedicated to assessing and comparing the four models from model characteristics, positioning performance, and atmosphere delay retrieval. The model comparison shows that IC and IW models are full-rank while IF and IFH models have a rank deficiency of size one that will result in biased estimations, which means the better solvability of IC and IW models. The experiments are carried out based on the 7-day Global Positioning System (GPS) observations collected at 57 global Multi-GNSS Experiment (MGEX) stations and Global Ionosphere Map (GIM) products. The results indicate that the IW model can accelerate SF-PPP convergence and achieve higher positioning accuracy compared to the other three SF-PPP models, especially in kinematic mode. With convergence criteria of 0.25 m in horizontal and 0.5 m in vertical, the east/north/up convergence times of IW model are 0.5/15.0/25.0 min and 0.5/16.0/36.5 min for static and kinematic modes, respectively. The IW model is able to achieve an instantaneous positioning accuracy of 0.28/0.35/0.75 m. In addition, a real kinematic test also demonstrates the best positioning solutions of IW model. Regarding troposphere delay retrieval, the IF, IFH, and IW models obtain a comparable daily accuracy of 3.0 cm on average, while the IC model achieves the worst accuracy of 8.0 cm. For precise ionosphere delay estimation, IW model only needs an average initialization time of 34.3 min, but a longer initialization time of 51.6 min is required for IF model. The daily precision of ionosphere delay estimation for IW model can reach up to 10.8 cm. At the present accuracy of GIM products, it is suggested that the IW model should be adopted for SF-PPP first due to its superior performance in positioning and atmosphere delay retrieval.     

不同边界层厚度下高马赫数进气道自起动过程研究

为了探寻入口边界层厚度变化对高马赫数进气道自起动性能的影响,对简化的二元高马赫数进气道的加速自起动过程进行数值仿真研究,分析了边界层厚度对自起动过程中流场波系结构变化和自起动性能的影响机制,获得了不同边界层厚度下的进气道自起动性能及主分离包高度的变化规律。结果表明:随着边界层相对厚度从0.05增加至0.3,进气道的自起动马赫数一开始保持不变,然后快速增大;相同主流条件下,不起动流场跨越主分离包无量纲压升和主分离包高度随边界层相对厚度的增大均变小;边界层动量损失厚度和跨越主分离包无量纲压升对进气道起动性能影响重大。