星光折射航天器自主定轨方案比较

当星光透射大气发生折射时 ,用星光折射角精确地反映星光在大气中离地球表面的高度 ,并建立高度、航天器与地球的几何关系。通过对折射角进行观测 ,间接测得地平 ,从而改善了用地平仪直接测地平所造成的航天器自主导航精度低的不足。本文提出了几种利用星光折射的航天器自主定轨方案 ,并作了细致的仿真实验 ,对直接和间接两种测量地平方法以及几种星光折射自主定轨方案进行了分析比较。     

Ariane transfer vehicle in service of man in orbit

The Ariane transfer vehicle (ATV), an Ariane 5 borne, unmanned propulsion vehicle, is designed to transport the logistics needed to resupply the International Space Station (ISS) and the man tended free flyer (MTFF) step 2 with pressurized and unpressurized cargo and to dispose the waste. The ATV is an expendable vehicle and is disposed of by a safe atmospheric burn up. In accordance with the AR5 schedule it should be operational in 1996 for missions toward ISS and beyond the year 2000 for MTFF 2 missions. The main constituents of the proposed ATV are the modified AR5 third stage L5, an upgraded VEB steering the launcher as well as the ATV and the P/L-adaptor providing mechanical and umbilical links to the payload. The mechanical part of the RVD-kit will be placed on the payload-module, the main RVD sensors are located on the adaptor and the needed computer intelligence will be integrated on the VEB. To minimize the development, and recurring costs, the ATV concept fully complies to the idea of maximum use of existing hardware and software, mainly from the AR5, Hermes and Columbus programs thus minimizing development and recurring costs. The ATV is compatible to ISS, MTFF and OMV and is able to transport logistic modules compatible with NSTS and U.S.-expendable launchers.     

对某距离自动跟踪系统测距误差的分析

根据某距离自动跟踪系统设计的实际情况，分析了系统中模拟数字（ＡＤ）转换电路、动目标显示（ＭＴＩ）与求模运算、波形分析和α－β滤波器所引入的测距误差，得出ＡＤ采样率和波形分析的内插点数决定了系统引入测距误差大小的结论。对实际工作参数的计算及校飞试验的结果证明，此距离自动跟踪系统引入的测距误差较小，满足雷达系统的要求。     

红外隐身材料的研究进展

红外探测器的高度发展已使用于目标表面的热红外隐身材料成为飞行器隐身技术中的一个重要组成部分。但对这种材料的发展情况,以往的文献一向较少涉及。本文概括了这种材料的一般性能要求,较全面地评述了十余年来红外隐身材料研究中各主要方面的发展情况,并分析了一些重要材料品种的特点、性能水平、技术影响因素、存在的问题和发展趋势。     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.     

按降低轨迹灵敏度综合最优设计飞行控制系统

本文提出了一个按降低轨迹灵敏度综合最优设计飞行控制系统的方法。它能使系统具有满意的动态品质,同时对系统参数的变化及非线性产生的影响具有较强的鲁棒性。该设计方法具有通用性和程序化,系统实现简单。     

多体分离抛撒初条件与分离特征参数

多次风洞自由飞多体分离抛撒实验均证实了被抛撒物运动初条件对抛离成功与否有决定性影响;为此可采取"戴帽"措施;但数值计算结果与此相反,因而需深入开展研究,解决问题。常规形式的风洞测力方法,无法模拟各分离体之间很大的相对速度。分离过程中"特征时间"是很小的,因而风洞实验以及数值计算必须计及非常小的"特征时间"所反映的非定常气动力。多体分离的实践表明,至少在快速分离过程中运动动力学相似是必需的。     

捷联惯性测量组合综合评估方法研究

简要论述了捷联惯性测量组合评估系统在小样本下的性能评估方法,给出了小样本下正态性分布结构和采用随机加权的评估算法。采用此评估方法可以实现对惯组的综合性能的分析与评估,对落点偏差的分析预测,从而实现对射前优选惯组的辅助决策。     

多模式组合诊断技术在导弹导引头上的应用研究

阐明了四种类型的多模式组合诊断方法及其故障诊断的核心思想。以某导弹导引头的故障诊断为实例，详细描述了基于模糊理论、神经网络和粗糙集理论的三组合模式的诊断过程，并给出了诊断结果；介绍了我们研制的基于不确定性理论和专家系统组合的智能化故障诊断专家系统的应用。研究和应用实例表明：多模式组合诊断技术通用性和鲁棒性强。能够加快诊断速度。降低误诊率。尤其适合于复杂系统的故障诊断，具有很大的工程实用价值。