Pareto-optimal solution of a two-objective problem in choosing conditions of monoimpeller milling

A problem of optimization of cutting parameters with respect to the criteria of maximum efficiency and maximum tool resistance is formulated. To solve the problem, a method is developed and applied for determining the Pareto-optimal values of machining conditions in milling the present-day GTE monoimpeller blade passages with a circular milling cutter.     

Gasodynamic characteristics of a combustion chamber in the integrated power plant with an asymmetric air intake

The results of experimental investigations of gasodynamic characteristics of a combustion chamber model in the integrated power plant (IPP) with an asymmetric air intake are presented. The influence of an angle of air supply into the chamber model on hydraulic losses and the flow structure is shown at different air flowrates, relative values of the minimal flow section area of the feeding air intake pipes, under changes of the flowrate of gas simulating gas generation products and geometric model parameters. A technique for measuring the concentration of carbon dioxide simulating IPP gas generation products in the combustion chamber air flow and the results of experimental investigations of a mixture formation process in the combustion chamber model are described.     

Laminar flow control research at TsAGI: Past and present

This paper presents a brief review of activities in laminar flow control being performed at the Central Aerohydrodynamic Institute named after Prof. N.E. Zhukovsky (TsAGI). These efforts are focused on the improvement of the existing laminar flow control methods and on the development of new ones. The investigations have demonstrated the effectiveness of aircraft surface laminarization applications with the aim of friction drag reduction. The opportunity of considerable delaying of laminar-turbulent transition due to special wing profile geometry and using boundary layer suction and surface cooling has been verified at sub- and supersonic speeds through various wind tunnel testing at TsAGI and during flying laboratory experiments at the Flight Research Institute (LII). The investigations on using hybrid laminar flow control systems for friction drag reduction were also carried out. New techniques of laminar flow control were proposed, in particular, the method of local heating of the wing leading edge, boundary layer laminarization by means of receptivity control, and electrohydrodynamic methods of boundary layer stability control.     

Difference schemes in computations for chemically non-equilibrium processes in the rocket engine nozzles

The problem of determining the “potential” number of integration steps by explicit difference schemes is solved within the framework of the prediction model for chemically non-equilibrium processes.     

Psychosocial effects of adjustment in Antarctica: lessons for long-duration spaceflight

This paper examines the utility of remote, isolated Antarctic research stations as analogs for long-duration spaceflights from the perspective of psychosocial processes of adaptation and adjustment. Certain features of the physical and man-made environments found in Antarctica are similar to those that will be encountered in outer space. In both settings, men and women are likely to experience a number of physiological and psychological changes in response to the extreme environmental conditions and the prolonged isolation and confinement. Biomedical research in Antarctica provides an opportunity to study the causes of these changes and to develop strategies for reducing the risks to health and well-being before they pose a serious threat to crew safety and mission success. A number of lessons for long-duration spaceflight are examined, including screening and selection of personnel; training programs designed to facilitate individual adjustment and group adaptation and minimize group conflict; identification of optimal leadership characteristics for small, isolated groups; an understanding of social dynamics and group "microcultures" necessary for the organization and management of small but heterogeneous groups; organization of work activities; facility design; and support infrastructure.     

Intrinsic time scale for reconnection on the dayside magnetopause

Recently much attention has been focused on the transient behavior of the magnetopause in response to pressure pulses and southward fluctuations of the interplanetary magnetic field. We examine the motion of the magnetopause behind the foreshock and conclude that this motion is affected by foreshock pressure variations but not by fluctuations in the direction of the magnetic field. Neither magnetopause erosion nor flux transfer event occurrence is controlled by the foreshock. On the contrary, flux transfer events occur at times of steady IMF and thier quasi-periodic behavior is controlled by the magnetopause or the magnetosphere and is not driven by the external boundary conditions. Since flux transfer events are clearly due to reconnection, this observation implies that the IMF must be southward some time perhaps as long as 7 minutes before flux transfer begins.     

Dayside reconnection during IMF northward: A possible foreshock effect

The northward and southward orientation of the interplanetary magnetic field (IMF) is usually considered as providing the external boundary conditions in the solar wind interaction with the Earth's magnetopause but it is the magnetic field in the magnetosheath that interacts with the Earth's magnetic field. In this paper, we consider the possibility that the wave activity in the foreshock region may affect the magnetic field orientation in the magnetosheath with time scales that might be geomagnetically effective. If magnetosheath magnetic field becomes disturbed on plasma streamlines which are connected to the quasi-parallel bow shock and foreshock, the magnetic field orientation on the inner magnetosheath may differ significantly from the undisturbed IMF. We present a model of dayside reconnection which may occur when the IMF northward and illustrate its effects on the erosion of the magnetopause.     

Collisionless reconnection in the magnetotail

Recent developments regarding collisionless reconnection in current sheets with a finite normal magnetic field component (B_z) are reviewed. In 2-D x, z configurations the ion tearing mode is stabilized by the electron compressibility. When the y dependence is included, cross-field current instabilities can be excited. Of these, the drift kink mode appears to be particularly important. 3-D electromagnetic particle simulations indicate that this mode can act as the precursor to the growth of tearing modes and subsequent reconnection.     

Forecasting the 23 and 24 solar cycles on the basis of MGM spectrum

A new method of nonlinear spectral analysis (called the method of global minimum: MGM), based on the best presentation (in sense of minimal squares) of a given time data set as a sum of sinusoids whose frequencies, amplitudes and phases are to be determined, has been used to find periodicities in annual Wolf sunspot numbers (W) during the period 1700–1995. The possible future behaviour of the 11-year solar cycle (based on an extrapolation of the calculated model) is also presented. The main characteristics of the 23^rd solar cycle are as follows: the W maximum occurs about 2004, with a peak of nearly 220. An unusually large value of W will occur during the 23^rd cycle, which should be characterised by the longest maximum, specifically, W will be greater than 100 during the 11-year period from 1997 to 2007. The first sharp rise will occur during the period 1996–1998, the second sharp during 2002–2004. The main features of the 24 year cycle are as follows: the next minimum in W, associated with the 24^th solar cycle, should occur in the year 2008 and the maximum in 2014. W is expected to peak at about 180. The minimum value for the 25^th year cycle is expected to occur in the year 2019. It is shown that the accuracy of these predictions depends, first of all, on the extrapolation of the hyperlong harmonic of the calculated polyharmonic model fit of observed annual sunspot numbers during the period 1700–1995. The error bars in the definition of the maximum and minimum epochs can be as large as two years.