数控车削加工仿真系统结构研究

根据实际加工情况提出了一种虚拟NC车削加工的仿真系统的设计及实现原理。在Visual C++平台上利用OpenGL技术建立虚拟加工机床数字化模型,用C++语言实现物理仿真相关的各个数学模型的建立,进行虚拟环境下数控车削加工的几何仿真及物理仿真,实现产品的虚拟车削制造。     

Morphological synthesis method of search for promising technicalsystem

The work studies the application of the morphological (structural) synthesis method of search for the new technical approaches. The method is based on the application of the theory of system, morphological and cluster analysis, methods of mathematics simulation and calculation experiments made by computer. The work shows how this method is used to synthesize the landing spacecrafts, hypersonic spacecrafts and medical equipment and gives the comparison of the present and synthesized technical systems (TS). The conclusion is that this method increases the degree of the validity decision made and broadens the number of possible variants which allows an increase in the quality (technical level) of the TS under development. The work also points out that the method allows the system to search for promising inventions to solve the problems of prognostication and to single out the trends of TS evolution. It also allows the system to single out these systems which are able to respond flexibly to the changing external conditions with the lowest expense, and therefore, increases the compatibility of the chosen TS     

Surveillance through walls and other opaque materials

The Department of Defense (DoD) has funded a dazzling array of “high tech” solutions for many of the problems facing our military forces. Many of these “solutions” have been effective for long range mass destruction but have not been applicable for the close-in hand-to-hand combat that is on our streets. Our goal at the Hughes AET Center has been to convert “high tech” DoD capabilities into cost effective tools to help law enforcement agencies do their jobs better. Surveillance systems presently used by law enforcement officers make extensive use of television, infrared and other Line-of-Sight (LOS) surveillance systems. However, these systems cannot tell what is happening on the other side of a wall, behind bushes, around the corner, in the dark or through a dense fog. A new sensor has been developed that uses technology developed by the DoD for missile warhead fuzing. This small, light weight, low power “Radar” is based upon the fact that radio waves can penetrate nonmetallic materials. This new surveillance capability can help provide information about what is in a wall, ceiling or floor or on the other side of a door or concrete wall. Real field scenarios are used in this paper to show how this radar works and how field users can tell if someone is moving inside a building, even from remote locations     

Active damping control of vibrational systems

The problem of vibration suppression in large flexible space structure (LFSS) is investigated. Based on the structure property of LFSS, an active damping strategy is proposed to effectively attenuate the critical vibrations of the structure subject to modeling uncertainty and external disturbance. Control algorithms are derived with the aim of suppressing both the vibrating magnitude and vibrating rate to an acceptable level. It is shown that the strategy exhibits robust and adaptive properties and is truly model-independent. The novelty of the proposed approach lies in the fact that it is fairly easy to set up the strategy and the overall computation involved is much less than any other strategies available to date. A two-bay truss is used to verify the validity of the proposed approach     

On adaptive multiband signal detection with the SMI algorithm

In a nonstationary and/or nonhomogeneous interference environment, an adaptive system for target detection may suffer a severe performance degradation due to the lack of a sufficient amount of data from which the system can learn (estimate) the statistics of the environment. The detection performance of an adaptive system, which employs a frequency diversity (multiband) signaling waveform and a multiband sample matrix inversion algorithm (SMI), is analyzed. By comparison with the corresponding single-band system under the chosen system constraint, it is shown that the multiband system can significantly outperform the single band when the amount of data available from a single frequency band is severely limited by the environment     

飞机导管标志研究与改进

分析了飞机各管路系统中导管标带识别、涂色识别和印章识别传统方法的不足，提出了采用激光刻制导管图号标记的新方法，阐明其基本原理和方法，并与传统方法作了比较分析。激光刻制方法使设计人员不用再在图样上注明导管的标志和辅助标志，减轻了设计的工作量，提高了工作效率，缩短了导管制造周期；同时减轻了飞机的重量，改善飞机性能；标记清晰、美观易认，有利于飞机的检查和维修。     

Ground Radiation Pattern Generated by High-Altitude Reflectors

A method is given to calculate the shape a high-altitude reflector must have to produce any intensity distribution inside the illuminated ground area. The method consists of setting up and solving a differential equation appropriate to the required ground intensity distribution. Cylindrical and spherical mirrors are discussed in detail, and mirror shapes for producing a particular type of uniform ground illumination are derived. These shapes approach paraboloids in the limit when the mirror altitude is much greater than the diameter of the illuminated area.     

Late Stages of Stellar Evolution

A large fraction of ISO observing time was used to study the late stages of stellar evolution. Many molecular and solid state features, including crystalline silicates and the rotational lines of water vapour, were detected for the first time in the spectra of (post-)Asymptotic Giant Branch (AGB) stars. Their analysis has greatly improved our knowledge of stellar atmospheres and circumstellar environments. A surprising number of objects, particularly young planetary nebulae with Wolf-Rayet (WR) central stars, were found to exhibit emission features in their ISO spectra that are characteristic of both oxygen-rich and carbon-rich dust species, while far-IR observations of the PDR around NGC 7027 led to the first detections of the rotational line spectra of CH and CH⁺. Based on observations with ISO, an ESA project with instruments funded by ESA Member States (especially the PI countries: France, Germany, The Netherlands, and the United Kingdom), and with the participation of ISAS and NASA.     

Detection of microlesions induced by heavy ions using liposomes filled with fluorescent dye.

In cells irradiation by heavy ions has been hypothesized to produce microlesions, regions of local damage. In cell membranes this damage is thought to manifest itself in the form of holes. The primary evidence for microlesions comes from morphological studies of cell membranes, but this evidence is still controversial, especially since holes also have been observed in membranes of normal, nonirradiated, cells. However, it is possible that damage not associated with histologically discernable disruptions may still occur. In order to resolve this issue, we developed a system for detecting microlesions based on liposomes filled with fluorescent dye. We hypothesized that if microlesions form in these liposomes as the result of irradiation, then the entrapped dye will leak out into the surrounding medium in a measurable way. Polypropylene vials containing suspensions of vesicles composed of either dipalmitoyl phosphatidylcholine, or a combination of egg phosphatidylcholine and cholesterol were irradiated at the Brookhaven National Laboratory using 56Fe ions at 1 GeV/amu. In several cases we obtained a significant loss of the entrapped dye above the background level. Our results suggest that holes may form in liposomes as the result of heavy ion irradiation, and that these holes are large enough to allow leakage of cell internal contents that are at least as large as a 1 nm diameter calcein molecule.     

民航机场建立呼叫中心的作用及实施对策

论文介绍了呼叫中心的技术原理，在分析民诱机场商务活动的现状的基础上，阐述了呼叫中心的特点及其在机场经营业务中的作用，提出了民航机场呼叫中心的模型，最后论述了民航机场实施呼叫中心的对策。