用EXCEL设计会计报表系统软件

利用Microsoft Excel强大的表格功能设计会计报表系统，可以简化会计报表软件的开发设计的难度，提高开发设计的效率。Excel开发会计报表系统主要的工作是设计个性化的菜单及编制从相应会计软件系统的数据库中取数的函数。本文主要分析会计报表系统的功能模型及利用Excel内置的VBA的设计个性化菜单。     

克服天线罩瞄准误差影响的一种鲁棒导引控制器设计方法

本文首先分析了某类导弹系统的稳定性，然后对天线罩瞄准线误差斜率Ａ的摄动对寻的制导控制系统稳定性的影响进行了研究。在此基础上，文章提出了鲁棒导引控制器的设计方法。仿真结果表明，按此方法设计出的控制器对于Ａ的摄动具有满意的鲁棒性，该方法在某类导弹控制系统的设计中得到应用，效果良好。     

基于RBF网络的惯导系统初始对准

建立了惯导系统（ＩＮＳ）初始对准的线性和非线性误差模型。分析了径向基函数（ＲＢＦ）网络的结构和工作原理。研究了ＲＢＦ网代替初始对准中的卡尔曼滤波器的实现方法。通过仿真表明，用神经网络进行初始对准，既可获得与卡尔曼滤波相同的对准精度，又提高了系统的实时性。     

VentureStar… reaping the benefits of the X-33 program

Major X-33 flight hardware has been delivered, and assembly of the vehicle is well underway in anticipation of its flight test program commencing in the summer of 1999. Attention has now turned to the operational VentureStar^TM, the first single-stage-to-orbit (SSTO) reusable launch vehicle. Activities are grouped under two broad categories: (1) vehicle development and (2) market/business planning, each of which is discussed. The mission concept is presented for direct payload delivery to the International Space Station and to low Earth orbit, as well as payload delivery with an upper stage to Geosynchronous Transfer Orbit (GTO) and other high energy orbits. System requirements include flight segment and ground segment. Vehicle system sizing and design status is provided including the application of X-33 traceability and lessons learned. Technology applications to the VentureStar^TM are described including the structure, propellant tanks, thermal protection system, aerodynamics, subsystems, payload bay and propulsion. Developing a market driven low cost launch services system for the 21st Century requires traditional and non-traditional ways of being able to forecast the evolution of the potential market. The challenge is balancing both the technical and financial assumptions of the market. This involves the need to provide a capability to meet market segments that in some cases are very speculative, while at the same time providing the financial community with a credible revenue stream. Furthermore, the market derived requirements need to be assessed so as not to impose unnecessary requirements on the vehicle design that add unreasonable cost to the development of the system, yet provides the right capabilities for new markets that could be triggered by dramatically lower space transportation prices.     

Tether Satellite System Collision Study

A study was performed to determine the probability of collision with resident space objects and untrackable debris for the tether component of the Tethered Satellite System (TSS) after it broke away from the Space Shuttle orbiter (mission STS-75) in February 1996. Both an analytical and a numerical approach were used in this study, and the results obtained with these two methods were found to be in good agreement. These results show that the deployed tether is expected to have been impacted by several particles 0.1mm or larger in size. The probability of collision with objects 10cm in size or larger was on the order of 10^–3 per month. Since the severed tether reentered within one month after deployment, the collision hazard to other objects while in orbit was small. The analytical methods used in this study are useful for tether collision evaluations in general.     

液体火箭发动机运动循环参数通用计算方法的研究

本文运用网络分析和图论的数学方法，建立起一个能计算各种动力循环方案参数的通用计算模型；同时，为了确保计算的准确、顺利进行，提出了控制参数的概念。最后编制了一个实用的通用计算软件，并用它对不同动力循环方案进行了计算     

The Brazilian scientific microsatellite SACI-1

The National Space Research Institute (INPE) is developing the first Brazilian Scientific Microsatellite (SACI-1) based on the vanguard technology and on the experience acquired through projects developed by Brazilian Space Program. The SACI-1 is a 750km polar orbit satellite. The spacecraft will combine spin stabilization with geomagnetic control and has a total mass of 60 kg. The overall dimensions are 640×470×470 mm. The SACI-1 satellite shall be launched together with CBERS (China-Brazil Earth Resource Satellite). Its platform is being designed for multiple mission applications. The Brazilian Academy of Sciences has selected four scientific payloads that characterize the mission. The scientific experiments are: ORCAS (Solar and Anomalous Cosmic Rays Observation in the Magnetosphere), PLASMEX (Study of Plasma Bubbles), FOTSAT (Airglow Photometer), and MAGNEX (Geomagnetic Experiment).     

红外多光谱扫描仪主体设计

文中简要介绍了中巴合作地球资源卫星(CBERS)红外多光谱扫描仪主体(简称扫描仪主体)的组成和工作原理。     

具L2有界不确定性扰动系统最优跟踪问题的时域解

本文对Ｌ２有界不确定性扰动下的一性系统在时域提出Ｍａｘｍｉｎ最优跟踪问题，给出了问题的时域状态反馈解，这一问题与相应的Ｈ∞问题具有某种一致性，因此，问题的求解方法可为解决领域不确定系统的Ｈ∞最优跟踪问题提供一种时域途径。     

斜切反喷管流场的数值模拟

为了在级间分离期间提供反推力，许多固体火箭发动机前端都装有一组斜切反喷管。由于反喷管的气动型面具有许多尖点，并且在超声速区有一个台阶，喷管内存在一系列激波，而且亚声速区和超声速区互相混杂。本文用时间相关法数值模拟了反喷管流场，控制议程用Ｍａｃ Ｃｏｒｍａｃｋ显格式求数值解，边界参数采用物理边界条件和从双特征线方法推导来的有效的特征方法为计算，为于固壁边界点，在不同的区域采用不同的方法对计算方程组求