选择工程材料的一种定量化方法

本文简述了选择工程材料时应考虑的部分因素,论述了材料在某些载荷作用下其机械性能与成本之间的关系,从而给出了可以定量化比较和计算的选择工程材料的方法。     

军用直升机任务效能综合评估技术及应用

论述了军用直升机任务效能综合评估的意义、方法,提出了以任务效能为优化目标的直升机综合设计技术,建立了直升机效能-费用模型。     

Time-frequency approaches to ISAR imaging of maneuvering targetsand their limitations

Inverse synthetic aperture radar (ISAR) imaging of the noncooperative maneuvering target is a challenging task because of its time variant orientation and rotation velocity which cannot be measured accurately. This correspondence investigates the principles of ISAR imaging of maneuvering targets, and proposes an algorithm for application in situations where the maneuverability is not too severe and the Doppler variation of subechoes from scatterers can be approximated as a first-order polynomial. The imaging results obtained by using real data show the effectiveness of the new method     

端壁侧向出流对透平轮缘密封的影响及优化

在燃气轮机的设计研究中,用于冷却静叶端壁的气体会有一部分从端壁的侧面沿轴向流出,这部分气体恰恰处在轮缘间隙密封流体和主流的交互作用区。采用数值模拟的方法研究了真实工况下端壁侧向出流与动静叶间隙密封流的相互影响,分析了其作用机理并在此基础上提出了一种新型的非均匀布置出流孔结构。结果表明端壁侧向出流能够抑制主流侵入涡系的大小和深度,当端壁侧向出流量Rm=10%能够将密封间隙冷却60~80K;新提出的非均匀布置端壁侧向出流孔结构能改善对静叶尾缘附近这些燃气入侵严重区域的密封效果,Rm=10%的情况下非均匀出流形式在静叶尾缘区域的密封效率能够提高3%左右。     

多序列激光阴影成像技术研究及应用

为获取超高速碰撞过程中弹丸的飞行姿态及碰撞所产生的碎片云特性,开展了多序列激光阴影成像技术研究。利用多光源空间分离、偏振分光、光束角放大和补偿滤光等技术解决了单色光带来的衍射和干涉噪声以及碰撞瞬间强烈的自发光干扰问题,并先后在碰撞靶上建立了2序列、4序列和8序列激光阴影成像系统。该系统可以获得最小间隔1μs、曝光时间10ns、像素1000万的多个不同时刻的超高速瞬态变化过程图像,并在超高速碰撞靶试验中得到应用,获得了2～7km/s 撞击速度时碎片云的多序列阴影图像,该序列图像清晰地描述了碎片云的轮廓发展变化过程。该技术以低成本的方式实现了超高速摄影机的功能,满足目前碰撞试验粒子的飞行姿态及碎片云显示需要,并可以应用于其它超高速瞬态过程测量及流场结构显示。     

Design and experiments of an active isolator for satellite micro-vibration

In this paper, a soft active isolator（SAI） derived from a voice coil motor is studied to determine its abilities as a micro-vibration isolation device for sensitive satellite payloads. Firstly,the two most important parts of the SAI, the mechanical unit and the low-noise driver, are designed and manufactured. Then, a rigid-flexible coupling dynamic model of the SAI is built, and a dynamic analysis is conducted. Furthermore, a controller with a sky-hook damper is designed. Finally,results from the performance tests of the mechanical/electronic parts and the isolation experiments are presented. The SAI attenuations are found to be more than 20 d B above 5 Hz, and the control effect is stable.     

Analytic estimation and numerical modeling of actively cooled thermal protection systems with nickel alloys

Actively cooled thermal protection system has great influence on the engine of a hypersonic vehicle, and it is significant to obtain the thermal and stress distribution in the system. So an analytic estimation and numerical modeling are performed in this paper to investigate the behavior of an actively cooled thermal protection system. The analytic estimation is based on the electric analogy method and finite element analysis（FEA） is applied to the numerical simulation. Temperature and stress distributions are obtained for the actively cooled channel walls with three kinds of nickel alloys with or with no thermal barrier coating（TBC）. The temperature of the channel wall with coating has no obvious difference from the one with no coating, but the stress with coating on the channel wall is much smaller than that with no coating. Inconel X-750 has the best characteristics among the three Ni-based materials due to its higher thermal conductivity, lower elasticity module and greater allowable stress. Analytic estimation and numerical modeling results are compared with each other and a reasonable agreement is obtained.     

Design and implementation of five-axis transformation function in CNC system

To implement five-axis functions in CNC system, based on domestic system Lan Tian series, an improved design method for the system software structure is proposed in this paper. The numerical control kernel of CNC system is divided into the task layer and the motion layer. A five-axis transformation unit is integrated into the motion layer. After classifying five-axis machines into different types and analyzing their geometry information, the five-axis kinematic library is designed according to the abstract factory pattern. Furthermore, by taking CA spindle- tilting machine as an example, the forward and the inverse kinematic transformations are deduced. Based on the new software architecture and the five-axis kinematic library, algorithms of RTCP （rotation tool center point control） and 3D radius compensation for end-milling are designed and realized. The milling results show that, with five-axis functions based on such software struc- ture, the instructions with respect to the cutter＇s position and orientation can be directly carried out in the CNC system.     

基于XGBoost的航空器动态滑行时间预测方法研究

对航空器进港和离港滑行时间进行精确的动态预测,可以有效提升机场的运行效率。首次提出基于XGBoost 的航空器动态滑行时间预测方法,该方法首先通过分析影响机场滑行时间的各类因素,构建可变滑行时间预测的关键特征指标;然后选取XGBoost 算法建立可变滑行时间预测模型,对模型的关键输入参数进行测试调整;最后将XGBoos...     

空间用液态金属传热式斯特林发电机换热结构研究

随着对太空的探索逐渐深入,核动力电源的优势日益凸显。针对空间核动力电源中的斯特林循环,本文设计1台10 kW的空间用液态钠钾传热式斯特林发电机组,发电机的高温端钠钾换热流道采用直肋式结构,并对换热结构进行优化研究。首先对斯特林发电机的热力学性能进行计算,在此基础上开展斯特林发电机组高温端换热器换热性能分析,得出72流道能较好满足换热要求;然后对换热结构进行应力应变分析,根据分析结果对换热结构的耐压壳体和钠钾流道管壁进行优化研究,使换热器各部件在工作状态下结构应力均低于材料屈服强度。