On adaptive multiband signal detection with the SMI algorithm

In a nonstationary and/or nonhomogeneous interference environment, an adaptive system for target detection may suffer a severe performance degradation due to the lack of a sufficient amount of data from which the system can learn (estimate) the statistics of the environment. The detection performance of an adaptive system, which employs a frequency diversity (multiband) signaling waveform and a multiband sample matrix inversion algorithm (SMI), is analyzed. By comparison with the corresponding single-band system under the chosen system constraint, it is shown that the multiband system can significantly outperform the single band when the amount of data available from a single frequency band is severely limited by the environment     

飞机导管标志研究与改进

分析了飞机各管路系统中导管标带识别、涂色识别和印章识别传统方法的不足，提出了采用激光刻制导管图号标记的新方法，阐明其基本原理和方法，并与传统方法作了比较分析。激光刻制方法使设计人员不用再在图样上注明导管的标志和辅助标志，减轻了设计的工作量，提高了工作效率，缩短了导管制造周期；同时减轻了飞机的重量，改善飞机性能；标记清晰、美观易认，有利于飞机的检查和维修。     

民航通信导航监视的危机管理

一、危机概念美国学者罗森豪尔特认为,危机是指“对一个社会系统的基本价值和行为准则架构产生严重威胁,并且在时间压力和不确定性极高的情况下必须对其作出关键决策的事件。”也就是指危机状态威胁到了现存的秩序。对于民航通信导航监视来说,危机是指对民航通信导航监视的保障     

Ground Radiation Pattern Generated by High-Altitude Reflectors

A method is given to calculate the shape a high-altitude reflector must have to produce any intensity distribution inside the illuminated ground area. The method consists of setting up and solving a differential equation appropriate to the required ground intensity distribution. Cylindrical and spherical mirrors are discussed in detail, and mirror shapes for producing a particular type of uniform ground illumination are derived. These shapes approach paraboloids in the limit when the mirror altitude is much greater than the diameter of the illuminated area.     

Tapped-inductor filter assisted soft-switching PWM DC-DC power converter

A novel high-frequency transformer linked full-bridge type soft-switching phase-shift pulsewidth modulated (PWM) controlled dc-dc power converter is presented, which can be used as a power conditioner for small-scale photovoltaic and fuel cell power generation systems as well as isolated boost dc-dc power converter for automotive ac power supply. In these applications with low-voltage large-current sources, the full-bridge circuit is the most attractive topology due to the possibility of using low-voltage high-performance metal-oxide-semiconductor field-effect transistor (MOSFET) and achieving high efficiency of the dc-dc power converter. A tapped-inductor filter including the freewheeling diode is newly implemented in the output stage of the full-bridge phase-shift PWM dc-dc converter to achieve soft-switching operation for the wide load variation range. Moreover, in the proposed converter circuit, the circulating current is effectively minimized without using additional resonant circuit and auxiliary power switching devices. The practical effectiveness of the proposed soft-switching dc-dc power converter was verified in laboratory level experiment with 1 kW 100 kHz breadboard setup using power MOSFETs. Actual efficiency of 94-97% was obtained for the wide duty cycle and load variation ranges.     

Late Stages of Stellar Evolution

A large fraction of ISO observing time was used to study the late stages of stellar evolution. Many molecular and solid state features, including crystalline silicates and the rotational lines of water vapour, were detected for the first time in the spectra of (post-)Asymptotic Giant Branch (AGB) stars. Their analysis has greatly improved our knowledge of stellar atmospheres and circumstellar environments. A surprising number of objects, particularly young planetary nebulae with Wolf-Rayet (WR) central stars, were found to exhibit emission features in their ISO spectra that are characteristic of both oxygen-rich and carbon-rich dust species, while far-IR observations of the PDR around NGC 7027 led to the first detections of the rotational line spectra of CH and CH⁺. Based on observations with ISO, an ESA project with instruments funded by ESA Member States (especially the PI countries: France, Germany, The Netherlands, and the United Kingdom), and with the participation of ISAS and NASA.     

Fiber-optic radar calibration

A simple fiber-optic radar calibration target is described. Its operation is based on a wideband fiber, a laser transmitter that is directly modulated by the down-converted radar signal and an optical diode receiver recovering said signal. Further up-conversion having a common local oscillator with the first mixer ensures fidelity of the calibration return. Measured useful bandwidth exceeds 200 MHz and practically any radar RF frequency can be handled when suitable mixers are employed. Amplifiers can be added to the down-converted path as desired to compensate for the fiber loss. Modulation and LO sweep provide easy ways of introducing artificial fluctuations and Doppler frequencies. Particularly pulsed radars are readily tested with the proposed scheme as no restrictions are posed by the radar's TR-switch delays.     

Analysis of the Integrity of the Microwave Landing System (MLS) Data Eu nctions

The microwave landing system (MLS) transmits angle, data, andrange information for use by airborne receivers. In this paper, theintegrity of the data functions is analyzed in terms of the probabilityof undetected errors remaining in the data. The data format andintegrity requirements were derived from the MLS standards andguidance material defined by the International Civil Aviation Organization (ICAO). Results show that the performancerequirements can be met by: 1) averaging the received data bits ofseveral samples of the same word using a majority voting;2) reducing the bit error rate at the output of the receiver'sdecoder; and 3) a combination of the above techniques.     

Shuttle performance improvements through multiple database integration

The ability to model and analyze system performance is a key enabler when you are extending the operational life of complex systems. This is especially true when the system is operating in a hostile environment, such as space. This paper discusses a change made to the Space Shuttle main engines (SSMES) that affected the solid rocket booster (SRB) performance, and illustrates how databases maintained by the different subsystem contractors can be integrated, correlated, and evaluated to improve a subsystem component performance model. The enhanced model can be used not only for better prediction of component performance on the existing system, but can be used on upgrades to the system, or the next generation space shuttle solid rocket. motor.