The History and Dynamics of Comet 9P/Tempel 1

Since its discovery in 1867, periodic comet 9P/Tempel 1 has been observed at 10 returns to perihelion, including all its returns since 1967. The observations for the seven apparitions beginning in 1967 have been fit with an orbit that includes only radial and transverse nongravitational accelerations that model the rocket-like thrusting introduced by the outgassing of the cometary nucleus. The successful nongravitational acceleration model did not assume any change in the comet’s ability to outgas from one apparition to the next and the outgassing was assumed to reach a maximum at perihelion. The success of this model over the 1967–2003 interval suggests that the comet’s spin axis is currently stable. Rough calculations suggest that the collision of the impactor released by the Deep Impact spacecraft will not provide a noticeable perturbation on the comet’s orbit nor will any new vent that is opened as a result of the impact provide a noticeable change in the comet’s nongravitational acceleration history. The observing geometries prior to, and during, the impact will allow extensive Earth based observations to complement the in situ observations from the impactor and flyby spacecraft.     

On Finite-Lag Receivers for Fading Channels

This paper reports some results on the development of finite-lag receivers for reception via fading channels. The receivers are given in discrete form and clearly show the additional complexity due to introduction of delay between the instants of reception and estimation of the signal. The channel noise has been assumed to have a multiplicative component due to fading. This results in the optimal demodulators being nonlinear and unrealizable. However, the receivers proposed are suboptimal, but realizable. Simulation studies evaluating the performance of the various receivers are also discussed.     

Interstellar Mapping and Acceleration Probe (IMAP): A New NASA Mission

The Interstellar Mapping and Acceleration Probe (IMAP) is a revolutionary mission that simultaneously investigates two of the most important overarching issues in Heliophysics today: the acceleration of energetic particles and interaction of the solar wind with the local interstellar medium. While seemingly disparate, these are intimately coupled because particles accelerated in the inner heliosphere play critical roles in the outer heliospheric interaction. Selected by NASA in 2018, IMAP is planned to launch in 2024. The IMAP spacecraft is a simple sun-pointed spinner in orbit about the Sun-Earth L1 point. IMAP’s ten instruments provide a complete and synergistic set of observations to simultaneously dissect the particle injection and acceleration processes at 1 AU while remotely probing the global heliospheric interaction and its response to particle populations generated by these processes. In situ at 1 AU, IMAP provides detailed observations of solar wind electrons and ions; suprathermal, pickup, and energetic ions; and the interplanetary magnetic field. For the outer heliosphere interaction, IMAP provides advanced global observations of the remote plasma and energetic ions over a broad energy range via energetic neutral atom imaging, and precise observations of interstellar neutral atoms penetrating the heliosphere. Complementary observations of interstellar dust and the ultraviolet glow of interstellar neutrals further deepen the physical understanding from IMAP. IMAP also continuously broadcasts vital real-time space weather observations. Finally, IMAP engages the broader Heliophysics community through a variety of innovative opportunities. This paper summarizes the IMAP mission at the start of Phase A development.     

Temperature effects in the ATIC BGO calorimeter

The Advanced Thin Ionization Calorimeter (ATIC) Balloon Experiment had a successful test flight and a science flight in 2000–01 and 2002–03 and an unsuccessful launch in 2005–06 from McMurdo, Antarctica, returning 16 and 19 days of flight data. ATIC is designed to measure the spectra of cosmic rays (protons to iron). The instrument is composed of a Silicon matrix detector followed by a carbon target interleaved with scintillator tracking layers and a segmented BGO calorimeter composed of 320 individual crystals totaling 18 radiation lengths to determine the particle energy. BGO (Bismuth Germanate) is an inorganic scintillation crystal and its light output depends not only on the energy deposited by particles but also on the temperature of the crystal. The temperature of balloon instruments during flight is not constant due to sun angle variations as well as differences in albedo from the ground. The change in output for a given energy deposit in the crystals in response to temperature variations was determined.     

Reorganization of the solar corona following a C4.7 flare

Yohkoh X-ray images, multifrequency two-dimentional observations of the Nancay Radioheliograph, Kitt Peak and Mees magnetograms provide a unique set of data with which to study a C4.7 long-duration flare that was observed close to the equator (S07, W11) on 25 Oct. 1994 at 09:49 UT. Linear force-free field extrapolations indicate a very high degree of non-potentiality in the active region. The X-ray flare started with the expansion of spectacular twisted loops. Fifteen minutes after the flare onset sporadic radio (type III) bursts were observed spreading over an area of almost 1/3 of the solar disc and two remote X-ray brightenings appeared over quiet regions of opposite magnetic polarity located in on opposite hemispheres of the Sun. In the close vicinity of these remote brightenings two coronal holes formed. The timing and location of these events combined with the overall magnetic configuration provide evidence for a large-scale magnetic reconnection occurring between the expanding twisted loops and the overlying huge loops which inter-connect quiet solar regions.     

Radio observations of total solar eclipse of November 3, 1994 at Chapecó (Brzil)

Radio observations of the eclipse on November 3, 1994, were carried out at Chapecó, Brazil by using a decimetric spectrograph having high spectral and time resolution. The light curve shows that: (1) Time variation of the radio flux before the totality was more compared to that after. (2) During the totality radio emission at 1.5 GHz was observed. Advantage of high spatial resolution ( 3.2 arc sec) possible during solar eclipse enabled us to determine the height of radio emission at 1.5 GHz. (3) Microwave bursts were observed associated with metric Type III-RS bursts. The source size of one of the microwave bursts was 7 arc sec and its physical parameters have been estimated. (4) The time difference between radio and optical contacts suggested for the first time asymmetrical limb brightening at 1.5 GHz.     

EXOSAT observations of NGC 1399 and NGC 1404: Two elliptical galaxies in the center of the Fornax cluster

Imaging X-ray observations of the Fornax cluster of galaxies centered on NGC 1399 and NGC 1404 are presented. NGC 1399 and NGC 1404, which are separated by about 10 arc minutes, are found to have an unusually high ratio of x-ray to optical flux. We consider the possibility that the x-radiation is produced by hot gas in the cores of the galaxies. Weak X-ray emission is also detected from a point almost exactly mid-way between NGC 1399 and NGC 1404. The combined emission from the galaxies is insufficient by over an order of magnitude to account for the the low-energy X-ray emission detected from this region by the HEAO-l satellite. It is suggested that the bulk of the HEAO-1 source is diffuse gas associated with the cluster as a whole, rather than individual galaxies.     

A Unified Approach to Model-Reference Adaptive Systems Part II: Application of Conventional Design Techniques

The use of linearized error equations in the design of model-reference adaptive systems developed by Part I is illustrated. Using standard control specifications on the system error (e.g., percent overshoot, rise time, etc.), a set of desired root locations on the root loci can be obtained. Then constants in the adaptive scheme can be chosen to obtain the desired root locations. Simulation results are given to illustrate the validity of the linearized error characteristic equation design procedure.