Identification and characteristics of source flares emitting 3-He or Fe enriched cosmic rays in the period September to December 1977

During the observation of solar cosmic rays on the Prognoz 6 and Helios 1 and 2 spacecrafts, several events with anomalous composition of accelerated particles (higher abundance of 3-He or Fe nuclei) occurred. We found seven such events from the period September to December 1977 for which data from the Prognoz 6 solar X-ray photometer are available. This material together with published optical and radio data from terrestrial observatories enabled us to identify more reliably the source flares and describe their characteristics. It turned out that the character of X-ray emission accompanying the emission of accelerated particles with anomalous composition shows no pronounced difference from other flares. No correlation has been found among the ratio 3-He/4-He and the angular distance between the field lines connected with the source flare and the place of observation. If a solar flare with anomalous ratio 3-He/4-He appears in a given active region, this region will probably produce other anomalous events.     

Analytic expansions of luni-solar gravity perturbations along rotating axes for trajectory optimization—Part 2: The multipliers system and simulations

An efficient self-contained trajectory optimization software is generated by making use of de Pontécoulant's analytic lunar theory removing the need for an outside third body ephemeris program to compute the lunar and solar position vectors at each integration step. The accelerations being further resolved along the rotating Euler–Hill frame after expansion to third order in the spacecraft radial distance, the adjoint differential equations are derived in a direct manner complementing the generation of the dynamic system of equations for full compatibility. Because the variation of parameters equations are cast in terms of the nonsingular equinoctial elements with the perturbation accelerations resolved in their analytic form along the rotating axes, the adjoint equations are also derived in the same manner providing a highly efficient and accurate system of equations for rapid computations in conjunction with Aerospace Corporation's NLP2 nonlinear programming codes to search for the initial values of the multipliers that steer the spacecraft towards its target orbit in minimum time. Numerical simulations show that the solutions obtained by the analysis developed in this paper are essentially identical to the more indirect approach based on the use of inertial accelerations obtained from a separate ephemeris generator and subsequent conversions to the thrust frame and equinoctial system.     

高纯α—Fe热压缩动态复原机制的研究

用高纯α-Fe在GLEEBLE-1500热模拟机上率进行了热压缩试验。变形温度分别为550℃,700℃,800℃和900℃,应变速率分别为0.001s~(-1),0.01s~(-1),0.1s~(-1),1s~(-1)和10s~(-1)。对其热压缩过程中的显微结构变化及真应力-真应变曲线进行的研究结果表明,形变温度的增加和应变速率降低有利于动态再结晶的进行;对动态再结晶与Z参数关系的研究结果表明,在一定的Z参数范围内即25<1nZ<37,高纯α-Fe可以发生动态再结晶,并给出动态再结晶图。     

Modeling of ionospheric scintillation at low-latitude

The presence and movement of plasma density fluctuations in the F-region of the ionosphere are studied by monitoring phase and amplitude of radio waves propagating through the region. In this paper, we have used weak scattering theory and assumed the plasma density fluctuations to behave like phase changing diffraction screen. Appropriate relations for scintillation index S₄, and phase variance δ? are derived and computed for different parameters of the plasma density irregularities of the ionosphere. SROSS-C2 satellite in situ measurements of plasma density fluctuations, which provide direct information about the structure and morphology of irregularities that are responsible for scintillation of radio waves, were used first time to develop a scintillation model for low latitude. It is observed that the scintillation index S₄ and phase variance δ? depends on the strength of the plasma turbulence. Finally, the results obtained from modeling are compared and discussed with the available recent results.     

An Artificial Neural Network based approach for estimation of rain intensity from spectral moments of a Doppler Weather Radar

By using a Doppler Weather Radar (DWR) at Shriharikota (13.66°N & 80.23°E), an Artificial Neural Network (ANN) based technique is proposed to improve the accuracy of rain intensity estimation. Three spectral moments of a Doppler spectra are utilized as an input data to an ANN. Rain intensity, as measured by the tipping bucket rain gauges around the DWR station, are considered as a target values for the given inputs. Rain intensity as estimated by the developed ANN model is validated by the rain gauges measurements. With the help of a developed technique, reasonable improvement in the estimation of rain intensity is observed. By using the developed technique, root mean square error and bias are reduced in the range of 34–18% and 17–3% respectively, compared to Z–R approach.     

Evolution of periodic orbits near the Lagrangian point L2

A study of the evolution of the periodic and the quasi-periodic orbits near the Lagrangian point L₂, which is located to the right of the smaller primary on the line joining the primaries and whose distance from the more massive primary is greater than the distance between the primaries, in the framework of restricted three-body problem for the Sun–Jupiter, Earth–Moon (relatively large mass ratio) and Saturn–Titan (relatively small mass ratio) systems is made. Two families of periodic orbits around the smaller primary are identified using the Poincaré surface of section method – family I (initially elliptical, gradually becomes egg-shaped with the increase in the Jacobi constant C and elongated towards the more massive primary) and family II (initially egg-shaped orbits elongated towards L₂ and gradually becomes elliptical with the increase in C). The family I in the Sun–Jupiter and Saturn–Titan systems contains two separatrix caused by third-order and fourth-order resonances, while the Earth–Moon system has only one separatrix which is caused by third-order resonances. Also in the Sun–Jupiter and the Saturn–Titan systems, family I merge with family II, around Jacobian constant 3.0393 and 3.0163, respectively, while in the Earth–Moon system, family II evolves separately from two different branches. The two branches merge at C = 3.184515. In the Earth–Moon system, the family II contains a separatrix due to third-order resonances which is absent in the other two systems.     

Clouds and Earth Radiant Energy System (CERES), a review: Past,present and future

The Clouds and Earth Radiant Energy System (CERES) project’s objectives are to measure the reflected solar radiance (shortwave) and Earth-emitted (longwave) radiances and from these measurements to compute the shortwave and longwave radiation fluxes at the top of the atmosphere (TOA) and the surface and radiation divergence within the atmosphere. The fluxes at TOA are to be retrieved to an accuracy of 2%. Improved bidirectional reflectance distribution functions (BRDFs) have been developed to compute the fluxes at TOA from the measured radiances with errors reduced from ERBE by a factor of two or more. Instruments aboard the Terra and Aqua spacecraft provide sampling at four local times. In order to further reduce temporal sampling errors, data are used from the geostationary meteorological satellites to account for changes of scenes between observations by the CERES radiometers.     

The Solar Sail Materials (SSM) project – Status of activities

SSM (Solar Sail Materials) is an on-going project for the European Space Agency (ESA) relying on past and recent European solar sail design projects. It aims at developing and testing future technologies suitable for large, operational solar sailcrafts.     

Near-infrared study of open clusters Teutsch 10 and Teutsch 25

The astrophysical parameters have been estimated for two unstudied open star clusters Teutsch 10 and Teutsch 25 using the Two Micron All Sky Survey ($2\mathit{MASS}$) database. Radius is estimated as 4.5 arcmin for both clusters using radial density profiles. We have estimated proper motion values in both RA and DEC directions as $2.28\pm 0.3$ and $-0.38\pm 0.11$?mas?yr^?1 for Teutsch 10 and $0.48\pm 0.3$ and $3.35\pm 0.16$?mas?yr^?1 for Teutsch 25 using $\mathit{PPMXL}$¹ catalog. By estimating the stellar membership probabilities, we have identified 30 and 28 most likely members for Teutsch 10 and Teutsch 25 respectively. We have estimated the reddening as $E(B-V)=0.96\pm 0.3$?mag for Teutsch 10 and $0.58\pm 0.2$?mag for Teutsch 25, while the corresponding distances are $2.4\pm 0.2$ and $1.9\pm 0.1$?kpc. Ages of $70\pm 10$?Myr for Teutsch 10 and $900\pm 100$?Myr for Teutsch 25 are estimated using the theoretical isochrones of metallicity Z?=?0.019. The mass function slopes are derived as $1.23\pm 0.30$ and $1.09\pm 0.35$ for Teutsch 10 and Teutsch 25 respectively. Estimated mass function slope for both the clusters are close to the Salpeter value ($x=1.35$) within the errors. Estimated values of dynamical relaxation time are found to be less than cluster’s age for these objects. This concludes that both objects are dynamically relaxed. The possible reason for relaxation may be due to dynamical evolution or imprint of star formation or both.     

Materials selection for electronic enclosures in space environment considering electromagnetic interference effect

Using low power electronic devices for space applications to reduce the mass and energy consumption has lead to electromagnetic interference (EMI) problem. Electronic enclosures are used to shield electronic devices against EMI. In the past, electromagnetic shielding has been mainly the only criteria considered in electronic enclosure design. However, there are several structural and thermal requirements for selection of shielding materials which should also be taken into account. In this research work, three quantitative materials selection methods, i.e. Digital Logic (DL), Modified Digital Logic (MDL), and Z-transformation, are employed to select the best material from among a list of candidate materials. Composite and metallic electronic enclosures are explored and the best material is selected. Z-transformation method is applicable to both of the considered case studies while DL and MDL can only be used for solving one of them. Z-transformation method ranks aluminum as the first choice among various metallic materials. The wide range of Z-transformation application and its practical results confirm the superiority of Z-transformation method over DL and MDL methods.