Solar UV irradiance variation during cycles 22 and 23

The Solar Ultraviolet Spectral Irradiance Monitor (SUSIM) aboard the Upper Atmosphere Research Satellite (UARS) has been measuring solar UV irradiances since October 1991, a period which includes the decline of solar cycle 22 followed by the rise of cycle 23. Daily solar measurements include scans over the wavelength range 115–410 nm at 1.1 nm resolution. As expected, the measured time series of UV irradiances exhibit strong periodicities in solar cycle and solar rotation. For all wavelengths, the UV irradiance time series are similar to that of the Mg II core-to-wing ratio. During solar cycle 22, the irradiance of the strong Ly- line varied by more than a factor of two. The peak-to-peak irradiance variation declined with increasing wavelength, reaching 10% just below the Al edge at 208 nm. Between the Al edge and 250 nm the variation was 6–7%. Above 250 nm, the variation declines further until none is observed above 290 nm. Preliminary results for the first portion of cycle 23 indicate that the far UV below the Al edge is rising at about the same rate as the Mg II index while the irradiances in the Ly- emission line and for wavelengths longer than the Al edge are rising more slowly — even after accounting for the lower level of activity of cycle 23.     

Ariane transfer vehicle in service of man in orbit

The Ariane transfer vehicle (ATV), an Ariane 5 borne, unmanned propulsion vehicle, is designed to transport the logistics needed to resupply the International Space Station (ISS) and the man tended free flyer (MTFF) step 2 with pressurized and unpressurized cargo and to dispose the waste. The ATV is an expendable vehicle and is disposed of by a safe atmospheric burn up. In accordance with the AR5 schedule it should be operational in 1996 for missions toward ISS and beyond the year 2000 for MTFF 2 missions. The main constituents of the proposed ATV are the modified AR5 third stage L5, an upgraded VEB steering the launcher as well as the ATV and the P/L-adaptor providing mechanical and umbilical links to the payload. The mechanical part of the RVD-kit will be placed on the payload-module, the main RVD sensors are located on the adaptor and the needed computer intelligence will be integrated on the VEB. To minimize the development, and recurring costs, the ATV concept fully complies to the idea of maximum use of existing hardware and software, mainly from the AR5, Hermes and Columbus programs thus minimizing development and recurring costs. The ATV is compatible to ISS, MTFF and OMV and is able to transport logistic modules compatible with NSTS and U.S.-expendable launchers.     

Analysis and Design of Series Resonant Converter by State-Plane Diagram

Analysis based on the state-plane diagram is given for series resonant converters operating in the frequency range 0.5 ? fs/fo ? 1.0. When the voltages and currents in the converter are normalized, design parameters take on special geometric meanings in the normalized state diagram. Examples of converter design using graphical methods are given for the cases of ? and ? control. Control characteristics of the converter operating in the continuous conduction mode are derived. The concept of the energy reflection coefficient is introduced as a measure of power transfer efficiency in the converter design.     

Optical guidance for autonomous landing of spacecraft

An autonomous rendezvous guidance scheme for spacecraft to descend to small celestial bodies by using optical information is presented. First, a new guidance, navigation, and control (GNC) method based on fixation-point (FP) inheritance is proposed. A spacecraft can safely descend toward the target point on the celestial body by tracking and autonomously renewing the FPs on the surface. Next, we deal with the method of extracting the FPs. A spatial band-pass filter (BPF) is applied to pictures taken to enhance features having comparable size with the tracking window. Local variance of the filtered image is used as a criterion of the extraction. Then, the relative information between the spacecraft and the celestial body (position, velocity, attitude, etc.) is calculated from the image coordinates and the range measurements of the FPs from the spacecraft. To suppress observation noise and improve navigation accuracy, an application of the extended Kalman filter is also presented. Finally, simulations are conducted to verify the guidance precision and the fuel consumption of the proposed guidance scheme     

A study of some interplanetary shock wave tendencies

The configuration, and the structure of shock waves from isolated solar flares and from a series of flares are discussed and classified.An invited paper presented at STIP Workshop on Shock Waves in the Solar Corona and Interplanetary Space, 15–19 June, 1980, Smolenice, Czechoslovakia.     

The long term variability of 4U 1258-61 (GX304-1)

We present optical spectroscopy and photometry of 4U 1258-61 obtained over the course of six years. Evidence for the evolution of a circumstellar envelope throughout the course of the observations is presented.     

EXOSAT observations of the BL Lac object Mkn 421

The BL Lac object Mkn 421 was observed by EXOSAT four times over a period of six days in February 1984. Significant X-ray variability was apparent on a timescale of less than a day, but with no accompanying spectral change. The source exhibited a very soft power law X-ray spectrum with an extremely low intrinsic column density (N_H10²⁰ cm^–2). There was no evidence for an additional hard component attributable to synchrotron self-Compton emission. The observations when combined with other published data imply that significant changes occur in the form of the broad-band UV/X-ray continuum of this source.     

Design and characteristics of a multiband communication satelliteantenna system

Feasibility studies on a multiband communication satellite antenna system and the key technologies involved in devising this system are described. The proposed multiband communication satellite utilizes four frequency bands: Ka (30/20 GHz), Ku (14/12 GHz), C (6/4 GHz), and S (2.6/2.5 GHz). It has six beam configurations, three multibeam and three shaped-beam. The following key technologies are presented: (1) a low-loss frequency selective subreflector (FSR) for compact feeds, (2) a low-loss and broadband frequency selective surface (FSS), and (3) a highly accurate and reliable mesh reflector     

A Fast Beamforming Algorithm for Large Arrays

This beamforming algorithm is written specifically for array radars in which the number of array elements K is very large compared with the number of jammers L the radar is designed to suppress. It uses a set of M noise vectors to construct a basis for the jammer component of the antenna output vectors. The component of the quiescent weight vector orthogonal to each basis vector is calculated, renormalized to unit length, and identified as the adapted weight vector. This algorithm is effective in the suppression of many types of jammers. The number of noise samples M required in the construction of the adapted weight vector is approximately equal to L. In the special case of L narrowband noise jammers, for example, a choice of M = L usually reduces the receiver output jammer power to a few dBs above the white noise background. It is permissible to have M相似文献