Gamma-ray spectroscopy: Status and prospects

Contemporary gamma-ray spectroscopy instruments and their results are reviewed. Sensitivities of 10^?4 to 10^?3 ph/cm²-sec have been achieved for steady sources and 10^?2 to 1 ph/cm²-sec for transient sources. This has led to the detection of gamma-ray lines from more than 40 objects representing 6 classes of astrophysical phenomena. The lines carry model-independent information and are of fundamental importance to theoretical modeling and our understanding of the objects. These results indicate that gamma-ray spectroscopy is relevant to a wide range of astrophysical problems and is becoming a major part of astronomy. The objectives and anticipated results of future instruments are discussed. Several instruments in development will have a factor of ～ 10 sensitivity improvement to certain phenomena over contemporary instruments. A factor of ～ 100 improvement in sensitivity will allow the full potential of gamma-ray spectroscopy to be realized. Instrument concepts which would achieve this with both present and advanced techniques are discussed.     

Validation of the stratospheric sounding unit

The Stratospheric Sounding Unit (SSU) is part of the TOVS (TIROS Operational Vertical Sounder) on NOAA operational meteorological satellites. SSU measurements can be validated by comparison with temperature measurements from colocated rocket sondes. Systematic differences are found which vary with rocket station and sonde and are a function of height. However, these measurements are not adequate to define the performance of individual SSUs to a precision which would allow the observations from different SSUs to be combined in the study of diurnal and semidiurnal tides and of long term trends in stratospheric temperature. Instead this is achieved by detailed radiometric and spectroscopic investigation of each individual SSU, both prior to launch and during its operational life. Using the techniques descirbed, it is demonstrated that measurements from different SSUs can be combined with a relative error of less than 0.2K in equivalent brightness temperature.     

Aircraft vertical profile implementation using directed-graphmethods

Aircraft vertical profile simulation is realized using a demand-driven minimal-calculation directed graph structure to reduce calculation time and to force synchronization of the performance measurement functions with the system state variables. Performance-directed model adaptation makes dynamic vertical profile path corrections, in the presence of fixed drag variations, possible. Drag variations ranging from +10% to -10% yielded fuel consumption improvements of less than 1% in the majority of the cases. Calculation time improvement for path simulation ranges from a factor of 1.19 in the worst case to 1.5 in the best case     

Experimental work on the aerodynamics of integrated slender wings for supersonic flight

This paper reviews an extensive programme of experimental work which was aimed at the production of integrated slender wings which had volume distributions and cross-section shapes compatible with the requirements of a supersonic transport aircraft. The wings were also to be cambered so that they were trimmed at the cruise condition about a centre of gravity position located at the aerodynamic centre position at the approach condition; furthermore the camber was to be chosen so that the drag was as low as possible. The main work was carried out about 20 years ago, but the involvement in specific design applications resulted in no overall account of the programme being published, although a number of reports on individual wings, or groups of wings, have appeared. This paper reviews the whole programme from the initial tests on very simple delta wings with diamond cross-sections to the final tests on realistic shapes which achieved almost all of the design requirements.     

A review of long drop tubes as a supplement/alternative to space experiments

The 100 meter high drop tube at the Marshall Space Flight Center has proven to be a viable facility for studies of containerless solidification. Advantages are that experiments are inexpensive and large numbers of specimens can be processed rapidly. It would not be unusual to run ten specimens in a day. Another significant advantage is that the undercooling behavior can be followed with sufficient sensitivity to easily detect the onset of recalescence and subsequent events.Disadvantages are the restrictions on specimen sizes and types of alloys that can be run in a microgravity environment. Practical specimen sizes range between 50 mg and 500 mg depending on the type of furnace being used. Refractory alloys can be processed in a vacuum (about 10^?5 torr) and therefore at microgravity. Non-refractory alloys demand an atmosphere (about 200 torr) to obtain appreciable undercooling before impact at the bottom of the tube. Under these conditions significant g forces result.Because of the present limitations of the 100 meter drop tube, the most definitive work has been done on niobium based alloys. Large amounts of undercooling have been observed routinely and the effects of undercooling on microstructure have been characterized in detail. X-ray diffraction, scanning electron microscopy, and transmission electron microscopy have been used to determine types of phases, amounts of phases, and compositions of phases. It is clear, as would be expected, that the results bear some resemblance to rapid solidification processing by quenching. However, there are dissimilarities due to the uniqueness of solidification by deep undercooling without quenching in long drop tubes and accompanying recalescence effects.     

An Optimal Normalization Scheme

An attitude normalization scheme, based on quaternion updates' of the attitude matrix in a strapdown system, is presented which is optimal in the two-norm sense. Furthermore, the algorithm requires minimal computer time and memory load.     

Earth benefits from space life sciences

Contributions of space exploration which are widely recognized are those dealing with the impact of space technology on public health and medical services in both urban and remote rural areas. Telecommunications, image enhancement, 3-dimensional image reconstructions, miniaturization, automation, and data analysis, have transformed the delivery of medical care and have brought about a new impetus to the field of biomedicine. Many areas of medical care and biological research have been affected. These include technological breakthroughs in such areas as: (1) diagnosis, treatment, and prevention of cardiovascular diseases, (2) new approaches to the understanding of osteoporosis, (3) early detection of genetic birth defects, (4) emergency medical care, and (5) treatment of chronic metabolic disorders. These are but a few examples where technology originally developed to support space medicine or space research has been applied to solving medical and health care delivery problems on Earth.     

50–200 GV cosmic rays at various heliolatitudes

We consider regular motion of 50 – 200 GV particles in a large-scale interplanetary magnetic field model which contains a wavy neutral sheet responsible for the sector-structure. Numerical calculations based upon energy losses along various trajectories are carried out to obtain the predicted omni-directional density and anisotropy of cosmic rays at various solar latitudes. A marked difference is found between odd and even solar cycles. The post-1969 field configuration gives small radial and large latitudinal gradient: cosmic ray density increases toward the poles. The latitudinal gradient turns out smaller and of opposite sense for the pre-1969 epoch. Anisotropy changes dramatically as we move off the solar equator: corotation appears to be restricted to low latitudes.     

Performance Degradation of MTI Circuits Due to Amplitude Limiting

The loss in output signal-to-noise ratio (SNR) due to amplitude limiting is obtained for a radar circuit consisting of a bandpass limiter, coherent demodulator, matched filter, and moving-target-indicator (MTI) filter. The circuit is used in scanning MTI radars. The tandem connection of the limiter and coherent demodulator is a model for the saturation of the intermediate-frequency (IF) demodulator of an MTI radar. Results on special functions are used to obtain simple formulas for the loss in output SNR relative to a linear IF demodulator when the input SNR is less than -15 dB and the number of hits per 3-dB beamwidth exceeds 15.     

Role of calcium in gravity perception of plant roots

Calcium ions may play a key role in linking graviperception by the root cap to the asymmetric growth which occurs in the elongation zone of gravistimulated roots. Application of calcium-chelating agents to the root cap inhibits gravitropic curvature without affecting growth. Asymmetric application of calcium to one side of the root cap induces curvature toward the calcium source, and gravistimulation induces polar movement of applied ⁴⁵Ca²⁺ across the root cap toward the lower side. The action of calcium may be linked to auxin movement in roots since 1) auxin transport inhibitors interfere both with gravitropic curvature and gravi-induced polar calcium movement and 2) asymmetric application of calcium enhances auxin movement across the elongation zone of gravistimulated roots. Indirect evidence indicates that the calcium-modulated regulator protein, calmodulin, may be involved in either the transport or action of calcium in the gravitropic response mechanism of roots.