Coronal Observations of CMEs

CMEs have been observed for over 30 years with a wide variety of instruments. It is now possible to derive detailed and quantitative information on CME morphology, velocity, acceleration and mass. Flares associated with CMEs are observed in X-rays, and several different radio signatures are also seen. Optical and UV spectra of CMEs both on the disk and at the limb provide velocities along the line of sight and diagnostics for temperature, density and composition. From the vast quantity of data we attempt to synthesize the current state of knowledge of the properties of CMEs, along with some specific observed characteristics that illuminate the physical processes occurring during CME eruption. These include the common three-part structures of CMEs, which is generally attributed to compressed material at the leading edge, a low-density magnetic bubble and dense prominence gas. Signatures of shock waves are seen, but the location of these shocks relative to the other structures and the occurrence rate at the heights where Solar Energetic Particles are produced remains controversial. The relationships among CMEs, Moreton waves, EIT waves, and EUV dimming are also cloudy. The close connection between CMEs and flares suggests that magnetic reconnection plays an important role in CME eruption and evolution. We discuss the evidence for reconnection in current sheets from white-light, X-ray, radio and UV observations. Finally, we summarize the requirements for future instrumentation that might answer the outstanding questions and the opportunities that new space-based and ground-based observatories will provide in the future.     

利用相似周方法预测第24活动周开始时间

利用相似周方法对第24活动周的开始时间与第23活动周下降相后期的太阳黑子数进行了预报.根据第23周已经出现的特征参量和下降相的形态特征,选取9,10,11,15,17和20等六个太阳活动周作为第23周下降相的相似周,对第24周开始时间进行预报.预报结果显示,第24活动周的开始时间为2007年5±1月,黑子数平滑月均极小值为7.1±2.6,第23太阳活动周长度为11.1年.与其他研究者的预报结果相比较,本文给出的结果与文献[11]和[12]及MSFC的结果比较一致.通过对相似周方法在下降相预测太阳活动周结束时间的研究讨论,及对第23周上升阶段的太阳黑子数和F10.7平滑月均值预报结果的评估,可以看出,相似周预报方法在太阳活动周长期预报中是很有应用价值的.     

大型飞机座舱温度控制系统控制律设计

大型飞机座舱温度控制系统具有温度控制非线性、强耦合、大迟滞性等特点,对控制律设计提出很高要求。根据系统设计要求,结合执行机构动作特性,提出了一种新型座舱温度控制律。系统控制方案采用压气机出口温度控制、组件出口温度控制、座舱供气温度控制和座舱区域温度控制四级控制;压气机出口温度目标值根据大气环境温度确定,座舱供气温度目标值根据座舱区域温度控制误差确定,组件出口温度目标值根据座舱供气温度目标值中的最小值确定;使用专家比例-积分-微分(PID)控制方法设计各级温度控制器,温度控制器的设计融入了解耦控制算法和系统保护控制逻辑,控制周期由各级温度控制响应特性确定。系统地面试验与飞行试验结果显示,该座舱温度控制系统响应速度快,抗干扰能力强,控制精度高,满足系统设计要求。     

喉栓式变推力发动机性能研究

利用建立的等效喉部面积计算方法,确定了喉栓式变推力发动机中喉栓构型、喉栓位置、喉部面积之间的重要关系,比较了不同构型发动机推力调节性能的差异。针对喉栓介入后发动机内复杂波系、流动分离等非传统流动现象开展稳态数值模拟,预示了变推力过程中发动机的整体性能;并将计算的稳态平衡压强、推力与原理样机的试验数据进行了对比,结果较为一致,验证了变推力的可行性和数值模型的有效性。所得结论可为变推力固体火箭发动机的设计、试验及应用提供参考依据。     

Deep Impact: Working Properties for the Target Nucleus – Comet 9P/Tempel 1

In 1998, Comet 9P/Tempel 1 was chosen as the target of the Deep Impact mission (A’Hearn, M. F., Belton, M. J. S., and Delamere, A., Space Sci. Rev., 2005) even though very little was known about its physical properties. Efforts were immediately begun to improve this situation by the Deep Impact Science Team leading to the founding of a worldwide observing campaign (Meech et al., Space Sci. Rev., 2005a). This campaign has already produced a great deal of information on the global properties of the comet’s nucleus (summarized in Table I) that is vital to the planning and the assessment of the chances of success at the impact and encounter. Since the mission was begun the successful encounters of the Deep Space 1 spacecraft at Comet 19P/Borrelly and the Stardust spacecraft at Comet 81P/Wild 2 have occurred yielding new information on the state of the nuclei of these two comets. This information, together with earlier results on the nucleus of comet 1P/Halley from the European Space Agency’s Giotto, the Soviet Vega mission, and various ground-based observational and theoretical studies, is used as a basis for conjectures on the morphological, geological, mechanical, and compositional properties of the surface and subsurface that Deep Impact may find at 9P/Tempel 1. We adopt the following working values (circa December 2004) for the nucleus parameters of prime importance to Deep Impact as follows: mean effective radius = 3.25± 0.2 km, shape – irregular triaxial ellipsoid with a/b = 3.2± 0.4 and overall dimensions of ∼14.4 × 4.4 × 4.4 km, principal axis rotation with period = 41.85± 0.1 hr, pole directions (RA, Dec, J2000) = 46± 10, 73± 10 deg (Pole 1) or 287± 14, 16.5± 10 deg (Pole 2) (the two poles are photometrically, but not geometrically, equivalent), Kron-Cousins (V-R) color = 0.56± 0.02, V-band geometric albedo = 0.04± 0.01, R-band geometric albedo = 0.05± 0.01, R-band H(1,1,0) = 14.441± 0.067, and mass ∼7×10¹³ kg assuming a bulk density of 500 kg m⁻³. As these are working values, {i.e.}, based on preliminary analyses, it is expected that adjustments to their values may be made before encounter as improved estimates become available through further analysis of the large database being made available by the Deep Impact observing campaign. Given the parameters listed above the impact will occur in an environment where the local gravity is estimated at 0.027–0.04 cm s⁻² and the escape velocity between 1.4 and 2 m s⁻¹. For both of the rotation poles found here, the Deep Impact spacecraft on approach to encounter will find the rotation axis close to the plane of the sky (aspect angles 82.2 and 69.7 deg. for pole 1 and 2, respectively). However, until the rotation period estimate is substantially improved, it will remain uncertain whether the impactor will collide with the broadside or the ends of the nucleus.     

Operating characteristics of a high radius pre-swirl cooling system

An experimental investigation into pre-swirl effectiveness and receiver hole discharge coefficient characteristics for a high radius injection pre-swirl cooling systems was carried out on a physically representative experimental rig with a 450 mm diameter rotor.The receiver holes and pre-swirl nozzle were located at a radius of 181 mm and 180 mm respectively.The experimental work was mainly conducted at 5 000～12 000 r/min,4 bar absolute pressure and 1.132 kg/s air supply.The maximum air supply temperature was 190 ℃.Pressure and temperature distributions in the pre-swirl system were examined with an emphasis on the velocity effectiveness of the pre-swirl system as a whole and on the discharge coefficients of the rotating 'receiver holes' in the rotor.The results showed that the velocity effectiveness increased with increasing swirl ratio resulting in reduced blade cooling flow temperature.Different seal flow configurations caused very different effectiveness at different speeds,but outflow through the inner and outer seals always gave the highest effectiveness compared other configurations.Increasing the seal flow rate reduced the effectiveness.For the coefficient of discharge,except for the low speed range,it increased with increase in swirl ratio for most speeds.      

Tracking Accuracies with Position and Rate Measurements

Tracking accuracies for the radial component of motion are computed for a track-while-scan radar system which obtains position and rate data during the dwell time on a target These results will be of interest to persons developing trackers for pulse Doppler surveillance radars. The normalized accuracies, computed for a two state Kalman tracking filter with white noise maneuver capability, are shown to depend upon two parameters, r = 4?0/?aT2 and s = ?dT/?0. The symbols ?0 and ?d are the position and rate measurement accuracies, respectively, ?a is the standard deviation of the white noise maneuver process and T is the antenna scan time. The scalar tracking filter equations are derived and numerical results are presented. Lower steady state tracking errors plus the earlier attainment of steady state accuracies are the direct consequence of incorporating the rate measurements into the tracking filter.     

Earth Observation Data Policy and Europe

This paper summarizes the final report of the Earth Observation and Data Policy and Europe (EOPOLE) fixed-term project, set up to review national research on the subject and to make recommendations for its improvement within an EU-wide context. It identifies the major issues to have emerged from the areas of user perspectives, pricing policy, the impact of new technologies on data policy, archiving policy and legal regulation and suggests ways of dealing with them. These include orienting data policies towards specific uses rather than users themselves; presenting a common European voice over the trade and exchange of geo-information via new communication means; and establishing a European-scale think-tank able to provide independent assessments of the economic, legal and international relations questions affecting Earth observation.     

用SOCKET实现大气污染监测数据的网络通信

用Socket接口实现大气污染在线监测的数据网络通讯，又实时监测某地区的大气污染物排放情况，从而达到在异地对现场的大气污染进行远程监控的目的。