周向畸变条件下压气机失速先兆分布特征

在低速单转子轴流压气机实验台上开展了周向插板式畸变实验研究,通过安装在叶顶前缘的动态压力传感器和转子出口的梳状五孔探针获取不同插板高度下畸变进气失速特性,结合实验及数值模拟,并采用时域分析法和一维连续小波方法对失速先兆传播特性及失速先兆尺度进行了分析。研究结果表明,失速先兆总是在叶顶前缘位置首先出现,然后由叶顶前缘沿轴向传播至转子出口叶顶位置,之后沿径向传播由叶顶向叶根发展直至失速团占据整个径向叶高。同时,随着畸变强度增加,失速先兆传播速度逐渐增加,且尺度不断增大,从突尖型失速先兆变为长尺度型失速先兆。      

基于HyChem方法的正丙基环己烷反应动力学模型

采用Hybrid Chemistry （HyChem）建模方法对正丙基环己烷开展模型研究,以七步集总反应对大分子燃料热解形成小分子产物这一过程进行建模,小分子产物氧化过程则以小分子详细机理USC Mech Ⅱ进行描述。将两个子机理结合构建了正丙基环己烷的HyChem反应动力学模型（包括112个组分和791个基元反应）,并通过流动管热解、点火延迟时间以及层流火焰速度的实验数据进行了模型验证。验证结果表明,正丙基环己烷HyChem反应动力学模型可以很好的预测正丙基环己烷热解过程中主要组分分布情况,在宏观燃烧参数的预测方面也有很好的表现,对点火延迟时间的计算相对误差为29.7%,对火焰传播速度的计算相对误差为11.1%。      

Analysis of blade vibration response induced by rotating stall in axial compressor

An experimental and numerical study was conducted to investigate the forced response of blade vibration induced by rotating stall in a low speed axial compressor. Measurements have been made of the transient stalling process in a low speed axial compressor stage. The CFD study was performed using solution of 3-dimensional Navier-Stokes equations, coupled with structure finite element models for the blades to identify modal shapes and structural deformations simultaneously. Interactions between fluid and structure were managed in a coupled manner, based on the interface information exchange until convergence in each time step. Based on the rotating stall measurement data obtained from a low speed axial compressor, the blade aeroelastic response induced by the rotating stall flow field was analyzed to study the vibration characteristics and the correlation between the phenomena. With this approach,good agreement between the numerical results and the experimental data was observed. The flow phenomena were well captured, and the results indicate that the rotating field stall plays a significant role in the blade vibration and stress affected by the flow excitation.      

五自由度位移平台控制系统设计

介绍了一种五自由度位移平台控制系统的设计。该系统为风洞流场中温度、压力等传感器进行测试提供位移平台。采用自行设计的运动控制器,结构简单,控制精确;移植了嵌入式实时操作系统μC／OS-Ⅱ,通过μC／OS-Ⅱ来调度运动控制器的多个任务;采用PC机作为上位机,为用户提供友好的人机界面。     

一种基于扩频码动态分配的无人机多址接入技术研究

针对无人机的网络化指控以及与综合一体化作战信息网的无缝铰链问题,提出一种基于扩频码动态分配的无人机集群多址接入技术,在直接序列扩频的基础上,根据战场态势为无人机动态分配一组新的扩频码,分别采用两组扩频码进行两次扩频,实现一种新型的无人机集群码分多址接入方式。Matlab/Simulink环境下的仿真结果表明,多址接入技术方法可行,具有较强的抗干扰能力。     

On the effects of each term of the geopotential perturbation along the time I: Quasi-circular orbits

This paper provides a useful new method to determine minimum and maximum range of values for the degree and order of the geopotential coefficients required for simulations of orbits of satellites around the Earth. The method consists in a time integration of the perturbing acceleration coming from each harmonic of the geopotential during a time interval T. More precisely, this integral represents the total velocity contribution of a specific harmonic during the period T  . Therefore, for a pre-fixed minimum contribution, for instance 1×10^-8$1\times {10}^{-8}$ m/s during the period of time T, any harmonic whose contribution is below this value can, safely, be neglected. This fact includes some constraints in the degree and order of the terms which are present in the geopotential formula, saving computational efforts compared to the integration of the full model. The advantage of this method is the consideration of other perturbations in the dynamics (we consider the perturbations of the Sun, the Moon, and the direct solar radiation pressure with eclipses), since these forces affect the value of the perturbation of the geopotential, because these perturbations depend on the trajectory of the spacecraft, that is dependent on the dynamical model used. In this paper, we work with quasi-circular orbits and we present several simulations showing the bounds for the maximum degree and order (M) that should be used in the geopotential for different situations, e. g., for a satellite near 500 km of altitude (like the GRACE satellites at the beginning of their mission) we found 35?M?198$35?M?198$ for T=1$T=1$ day. We analyzed the individual contribution of the second order harmonic (_J2$J_2$) and we use its behavior as a parameter to determine the lower limit of the number of terms of the geopotential model. In order to test the accuracy of our truncated model, we calculate the mean squared error between this truncated model and the “full” model, using the CBERS (China-Brazil Earth Resources Satellite) satellite in this test.     

中长期轨道预报中大气阻力系数补偿算法的研究

利用地磁平静期的CHAMP卫星精密星历对多个弧段的大气阻力系数进行解算,找到了适用于轨道预报的最优系数,分析了最优阻力系数与地磁指数、迹向残差的关系,利用线性回归分析建立了大气阻力系数补偿算法。针对中长期轨道预报的需求,该算法能够降低定轨弧段较短条件下阻力系数的解算误差。将该补偿算法应用于不同时期CHAMP卫星和天宫一号的轨道预报,验证了该算法的正确性和普遍适用性,结果表明预报精度能够提高20%以上。     

不同重力环境下空间机械臂神经自适应鲁棒控制

针对空间机械臂从地面装调到空间应用过程中重力项的变化问题,提出了一种神经网络自适应鲁棒补偿控制策略用于空间机械臂的末端控制,从而实现在地面重力环境下装调好的空间机械臂在空间微重力环境下实现在轨操控任务。通过神经网络在线建模来逼近系统模型中变化的重力项,逼近误差及系统的不确定性通过自适应鲁棒控制器来补偿。该控制策略不依赖于系统的模型,避免了回归矩阵的复杂计算及未知参数的估计,降低了计算量。基于李亚普诺夫理论证明了闭环系统的渐近稳定性。仿真结果表明该控制器对不同重力环境下空间机械臂的末端控制均能达到较高的控制精度,具有重要的理论研究和工程应用价值。     

ECR中和器改进试验研究

目前国内电子回旋共振(ECR)中和器的研究存在电子束流不能连续引出的问题,为此通过改进中和器天线结构及优化电子引出孔径来改善中和器的性能。试验结果表明：中和器结构改进及优化后其电子束流可以随着接触电压的升高而连续变化,同时提高了中和器的推进剂利用效率、降低了电子产生损耗。推进剂利用效率和电子产生损耗在中和器结构改进前后分别为1.278 9和194.573 W/A,1.659 8和126.3 W/A。试验还通过静电探针诊断出中和器耦合天线附近等离子体密度分布在1.72×10¹⁷~12.1×10¹⁷ m^-3范围内。     

20cm口径离子推力器性能建模与仿真

为了分析国内首台通过在轨飞行测试的20cm离子推力器栅极系统束流离子运行特性和推力器性能,针对该推力器栅极系统建立了束流引出二维数值仿真计算模型,利用PIC/MCC数值仿真计算方法,模拟束流引出过程中带电粒子在电场作用下的加速、聚焦与引出、带电粒子与中性原子之间的相互作用、电场和等离子体流场之间的相互耦合等过程。数值计算结果显示,屏栅截获的离子电流约为1.71×10 -4 A,加速栅截获的电流和CEX离子电流分别为0 A和9.11×10 -7 A,因此,加速栅电流的主要来源是冲击到其表面的CEX离子,证明了加速栅电流的主要来源是冲击到其表面的CEX离子,计算的加速栅截获电流与束流电流之比约为0.114%。试验测得推力器运行4000h期间,电子反流极限电压始终为75~90〖KG*9〗V,其变化幅度很小,这意味着中和器发射的电子在栅极系统中的反流不会导致其发生失效。理论计算结果与试验测试值相比,误差约为1.08%。〖JP〗