Global Processes that Determine Cosmic Ray Modulation

The global processes that determine cosmic ray modulation are reviewed. The essential elements of the theory which describes cosmic ray behavior in the heliosphere are summarized, and a series of discussions is presented which compare the expectations of this theory with observations of the spatial and temporal behavior of both galactic cosmic rays and the anomalous component; the behavior of cosmic ray electrons and ions; and the 26-day variations in cosmic rays as a function of heliographic latitude. The general conclusion is that the current theory is essentially correct. There is clear evidence, in solar minimum conditions, that the cosmic rays and the anomalous component behave as is expected from theory, with strong effects of gradient and curvature drifts. There is strong evidence of considerable latitude transport of the cosmic rays, at all energies, but the mechanism by which this occurs is unclear. Despite the apparent success of the theory, there is no single choice for the parameters which describe cosmic ray behavior, which can account for all of the observed temporal and spatial variations, spectra, and electron vs. ion behavior.     

A Superlimiting Phased-Array Receiving System in a Two-Source Environment

The performance of a uniformly spaced phased-steered line array with element channel superlimiting is studied for far-field sources consisting of 1) two sinusoidal signals with different frequencies and angular locations, and 2) a sinusoid and a noise signal at different angular locations. Attention is focused on the nonlinear case where internal noise is negligible compared to both input signals. The analysis for the two-sinusoid case gives the precise frequencies, positions, and amplitudes of all apparent sources. In addition to the two active sources, the array output has an array of images arranged symmetrically in sine space about the larger input, at intervals equal to the spacing between the two active sources. For the case of a separated sinusoid and a noise source, the analysis shows that the angular positions and average powers of the array outputs duplicate the double-sinusoid results, but the images have noise-like spectra. The analyses are confirmed by experimental results obtained with a 60-element superlimiting X-band array.     

Radiation climate map for analyzing risks to astronauts on the mars surface from galactic cosmic rays

The potential risks for late effects including cancer, cataracts, and neurological disorders due to exposures to the galactic cosmic rays (GCR) is a large concern for the human exploration of Mars. Physical models are needed to project the radiation exposures to be received by astronauts in transit to Mars and on the Mars surface, including the understanding of the modification of the GCR by the Martian atmosphere and identifying shielding optimization approaches. The Mars Global Surveyor (MGS) mission has been collecting Martian surface topographical data with the Mars Orbiter Laser Altimeter (MOLA). Here we present calculations of radiation climate maps of the surface of Mars using the MOLA data, the radiation transport model HZETRN (high charge and high energy transport), and the quantum multiple scattering fragmentation model, QMSFRG. Organ doses and the average number of particle hits per cell nucleus from GCR components (protons, heavy ions, and neutrons) are evaluated as a function of the altitude on the Martian surface. Approaches to improve the accuracy of the radiation climate map, presented here using data from the 2001 Mars Odyssey mission, are discussed.     

The connection between radiation belt and auroral processes

Space Science Reviews - The aurora with its associated electric fields and energetic particles affects the structure of the ionosphere, plasmaphere, and ring current. It injects protons and heavier...     

Critical Issues on Magnetic Reconnection in Space Plasmas

The idea of expedient energy transformation by magnetic reconnection (MR) has generated much enthusiasm in the space plasma community. The early concept of MR, which was envisioned for the solar flare phenomenon in a simple two-dimensional (2D) steady-state situation, is in dire need for extension to encompass three-dimensional (3D) non-steady-state phenomena prevalent in space plasmas in nature like in the magnetosphere. A workshop was organized to address this and related critical issues on MR. The essential outcome of this workshop is summarized in this review. After a brief evaluation on the pros and cons of existing definitions of MR, we propose essentially a working definition that can be used to identify MR in transient and spatially localized phenomena. The word “essentially” reflects a slight diversity in the opinion on how transient and localized 3D MR process might be defined. MR is defined here as a process with the following characteristics: (1) there is a plasma bulk flow across a boundary separating regions with topologically different magnetic field lines if projected on the plane of MR, thereby converting magnetic energy into kinetic particle energy, (2) there can be an out-of-the-plane magnetic field component (the so-called guide field) present such that the reconnected magnetic flux tubes are twisted to form flux ropes, and (3) the region exhibiting non-ideal MHD conditions should be localized to a scale comparable to the ion inertial length in the direction of the plasma inflow velocity. This definition captures the most important 3D aspects and preserves many essential characteristics of the 2D case. It may be considered as the first step in the generalization of the traditional 2D concept. As a demonstration on the utility of this definition, we apply it to identify MR associated with plasma phenomena in the dayside magnetopause and nightside magnetotail of the Earth’s magnetosphere. How MR may be distinguished from other competing mechanisms for these magnetospheric phenomena are then discussed.This revised version was published online in July 2005 with a corrected cover date.     

The homologous flare sites and the general solar activity

The homologous flares observed in the same region of a spotgroup testify the existence and the duration of a permanent instability. However, they also attest that the general magnetic configuration is not destroyed by these flares and that it changes $\text{slowly}$ up to the death of the site.The study of every flaring sites where more than ten flares occur has been performed in Meudon for the 1974–1980 period.One hundred and sixty-six sites have been analysed from the rotation where the A.R. is observed up to five rotations ahead. The basis of the study are the “Synoptic Maps”. A relation is found between the presence of crossing of “filament-phantom” corridors and the location of the homologous flare sites.¹     

Electrostatic gravity gradiometer design for the future mission

Satellite gravity gradiometry has been applied in GOCE mission to obtain higher harmonics of the Earth’s gravity mapping. In-orbit results showed that the precision of GOCE gradiometry achieved a level of 10–20 mE/Hz^1/2 in the bandwidth of 38–100 mHz, and the major error source came from the intrinsic noise of the core sensor electrostatic accelerometer. Two schemes for improving sensitivity of such accelerometer are presented by optimizing the parameters to reduce the dynamic range and choosing the heavier proof mass to suppress the thermal noise limited by the discharging gold wire. As a result, an accelerometer with a better resolution of 6.6×$6.6\times$10⁻¹³ m/s²/Hz^1/2 could be developed, and then a precision of 3 mE/Hz^1/2, corresponding to a spatial resolution of about 78 km half wavelength, is achievable for the future satellite gradiometric mission.     

Measuring Techniques Applied in an MHD-Augmented Shock Tunnel

The determination of the detailed performance of an MHD-augmented high-enthalphy shock tunnel requires the simultaneous measurment of a large number of aerodynamic, electrical, and electromagnetic parameters in a test time interval of the order of several hundred microseconds. In the feasibility study currently being conducted in our laboratory of such a device, an extensive measuring system was set up and evaluated, and is being used to acquire facility performance data. This paper describes this measuring system, discusses the modifications and adaptations applied to make the various components of the system operable and compatible, and gives illustrative examples of the performance of the system.     

Effect of Processing and Composition on the Structure and Properties of P/M EP741NP Type Alloys

A study was carried out on the effects of processing and composition on the structure and properties of P/M EP741NP type alloys. The objectives of this study were to understand the role of Hf in a P/M superalloy containing high niobium used in aircraft engines and to determine the effects of extrusion and forging the powders as contrasted to HIPing (hot isostatic pressing) only. Two alloys of the P/M EP741NP composition were atomized: one alloy contained 0.26%Hf and the other was Hf free. After the as-atomized powders from both alloys were characterized, the powders were extruded into billets, forged and heat treated. After each process, the microstructures were characterized by SEM and the phases were extracted and identified by X-ray diffraction. The presence of Hf in the residues was probed by EDS (energy dispersive spectroscopy). The alloys were given the published Russian heat treatment as well as a more conventional heat treatment more typical of western powder alloys. Tensile, creep and stress rupture mechanical property tests were run. Results of the structural behavior of the alloys after each processing step will be presented and discussed. The role of the Hf on the mechanical proper- ties will be discussed.     

Effect of Variable Selection on Multidisciplinary Design Optimization： a Flight Vehicle Example

Different multidisciplinary design optimization (MDO) problems are formulated and compared. Two MDO formulations are applied to a sounding rocket in order to optimize the performance of the rocket. In the MDO of the referred vehicle, three disciplines have been considered,which are trajectory, propulsion and aerodynamics. A special design structure matrix is developed to assist data exchange between disciplines. This design process uses response surface method (RSM) for multidisciplinary optimization of the rocket. The RSM is applied to the design in two categories: the propulsion model and the system level. In the propulsion model, RSM deter-mines an approximate mathematical model of the engine output parameters as a function of design variables. In the system level, RSM fits a surface of objective function versus design variables. In the first MDO problem formulation, two design variables are selected to form propulsion discipline. In the second one, three new design variables from geometry are added and finally, an optimization method is applied to the response surface in the system level in order to find the best result. Application of the first developed multidisciplinary design optimization procedure increased accessible altitude (performance index) of the referred sounding rocket by twenty five percents and the second one twenty nine.