一种折叠弹翼悬挂物的分离轨迹试验技术

提出了一种新的折叠弹翼悬挂物机弹分离轨迹试验技术,重点解决了在机弹分离过程中折叠弹翼动态展开时悬挂物的气动力获取问题。研究表明,提出的试验技术通过将悬挂物气动力修正方法引入到悬挂物分离安全性研究当中,准确地得到悬挂物的分离特性,解决了折叠弹翼悬挂物分离轨迹风洞试验技术瓶颈,为折叠弹翼悬挂物的投放分离安全性提供一套工程实用的解决方案。     

环型与线型聚能装药射流成型机理对比

环型聚能装药药型罩2侧在挤压汇聚形成射流过程中存在不对称性,不能完全套用线型聚能装药射流成型的现有理论。利用DYNA3D软件对相同剖面结构的环型、线型聚能装药射流成型过程进行数值模拟,通过比较分析得出了环型聚能装药形成杵体及射流参数的分布特性,为进一步理论研究及工程应用提供参考。     

基于DCT-CS的脉冲星周期超快速估计方法

受快速傅里叶变换（fast Fourier transform，FFT）的影响，基于FFT和压缩感知（compressive sensing, CS）的脉冲星周期快速估计算法的计算量大。为进一步减小计算量并提高计算精度，利用离散余弦变换（discrete cosine transform，DCT)取代FFT，提出了一种基于DCT-CS的脉冲星周期超快速估计算法。在该方法中，利用DCT提取脉冲星信号的低频部分构建低频DCT矩阵；构建畸变轮廓字典并获取累积轮廓；提出了利用最大值超分辨率稀疏恢复估计脉冲星周期的方法。仿真结果表明，DCT-CS的脉冲星周期估计精度达到了3.82×10-12 s，计算时间达到了9.31 ms。与FFT-CS相比，周期估计精度提高了约16%，计算时间缩短了约37.5%，实现了实时高精度的脉冲星周期估计。     

对深入贯彻<武器装备研制的标准化工作规定>的几点看法

根据笔者１０ 年来参与起草、宣传《武器装备研制的标准化工作规定》的实践，以及对该文件实施情况的长期关注与思考，对在该文件修订以前继续做好贯彻工作提出了“提高三点认识，抓好三个环节”的看法，即：提高对强化全员参与意识；建立系统管理标准化的思想；明确合理选用和剪裁标准的思想的三点认识以及抓好研制过程中使用方提出标准化要求，发挥需求牵引作用；编制好“新产品标准化大纲”，发挥其在工程研制中的指导作用；搞好评审和定型时的标准化审查，发挥其监督作用的三个环节     

阵风缓和系统的组合控制规律

 本文给出具有阵风缓和和其他主动控制功能的组合控制规律。阵风缓和用测量阵风方法的开环控制。当缓和输出量时,闭环控制用以稳定阵风缓和系统并满足其他主动控制要求。本文用一组合的二次型性能指标,得到最优反馈控制规律与测量阵风的组合的控制规律。文末并附有算例。     

碳氢燃料的热稳定性研究：沉积的导热系数试验测定

用保持壁温为常值条件下的装置测定有燃油流动下沉积的导热系数数据。用专门试验段形成沉积及金属板夹层复合结构来测定没有燃油流动下沉积的导热系数值。与文献上结果比较数据的分散性大大改善。本文所用的方法以及结果都较Tevelde和Glickstein的方法及结果为合理。本文所做的试验数据已为工业界所应用。     

可编程逻辑器件的设计与开发

概括介绍可编程逻辑器件CPLD的主要特点、EDA软件平台和VHDL开发语言。介绍在EDA软件平台的支持下,采用VHDL语言开发以可编程逻辑器件CPLD为核心的现代数字系统设计方法和开发设计流程。     

Estimation of risk based on multiple events in radiation carcinogenesis of rat skin.

In the multistage theory of carcinogenesis, cells progress to cancer through a series of discrete, irreversible, heritable genetic alterations or mutations. However data on radiation-induced cancer incidence in rat skin suggests that some part of an intermediate repairable alteration may occur. Data are presented on cancer induction in rat skin exposed to the following radiations: 1. an electron beam (LET=0.34 keV/um, 2. a neon ion beam (LET=25 keV/um and 3. an argon ion beam (LET=125 keV/um. The latter 2 beams were generated by the Bevalac at the Lawrence Berkeley Laboratory, Berkeley, CA. About 6.0 cm2 of skin was irradiated per rat. The rats were observed every 6 weeks for at least 78 weeks and tumors were scored at first occurrence. Several histological types of cancer, including squamous and basal cell carcinomas, were induced. The cancer yield versus radiation dose was fitted by the quadratic equation (Y(D)=CLD+BD2), and the parameters C and B were estimated for each type of radiation. Analysis of the DNA from the electron-induced carcinomas indicated that K-ras and/or c-myc oncogenes were activated in all tumors tested, although only a small proportion of neon-induced tumors showed similar activation. In situ hybridization indicated that the cancers contain subpopulations of cells with differing amounts of c-myc and H-ras amplification. The results are consistent with the idea that ionizing radiation produces carcinogenically relevant lesions via 2 repairable events at low LET and via a non-repairable, linked event pathway at high LET; either pathway may advance the cell by 1 stage in the multistage model. The model, if validated, permits the direct calculation of cancer risk in rat skin in a way that can be subjected to experimental testing.     

Measurement of middle atmospheric ozone density profile by rocket-borne radiometer onboard KSR-II

KSR-II, a two-stage sounding rocket of KARI was launched successfully at the Korean Peninsula on June 11, 1998. The apogee of the rocket was 137 km. For the ozone measurement, 8-channel UV and visible radiometers were onboard the rocket. The rocket measured an in situ stratospheric and mesospheric ozone density profile over Korea during its ascending phase using the radiometer and transmitted the data to ground station in real time. The maximum ozone density occurs near 25 km. Retrieved profile has a random error (1σ) of approximately 15% for altitude below 20km, 7% between 20-50 km and 10% greater than 50 km. The retrieved data were compared with Dobson spectrophotometer, ozonesonde, and HALOE onboard the UARS. Our results are in reasonable agreements with others.     

“自准”赝像及识别

置平面镜于凸透镜后,则凸透镜前焦平面上的物成像于该物平面上,即“自准”成像.满足其它条件也能成像于物平面.分析不同条件下像的形成及其特点,并给出识别自准成像的判据.