H1 output tracking control for flight control systems with time-varying delay

For flight control systems with time-varying delay, an H1 output tracking controller is proposed. The controller is designed for the discrete-time state-space model of general aircraft to reduce the ef...     

H∞ output tracking control for flight control systems with time-varying delay

For flight control systems with time-varying delay, an H∞ output tracking controller is proposed. The controller is designed for the discrete-time state-space model of general aircraft to reduce the effects of uncertainties of the mathematical model, external disturbances, and bounded time-varying delay. It is assumed that the feedback-control loop is closed by the communication network, and the network-based control architecture induces time-delays in the feedback information. Suppose that the time delay has both an upper bound and a lower bound. By using the Lyapu- nov-Krasovskii function and the linear matrix inequality （LMI）, the delay-dependent stability criterion is derived for the time-delay system. Based on the criterion, a state-feedback H∞ output tracking controller for systems with norm-bounded uncertainties and time-varying delay is presented. The control scheme is applied to the high incidence research model （HIRM）, which shows the effectiveness of the proposed approach.     

Reentry trajectory optimization for hypersonic vehicle satisfying complex constraints

The reentry trajectory optimization for hypersonic vehicle（HV）is a current problem of great interest.Some complex constraints,such as waypoints for reconnaissance and no-fly zones for threat avoidance,are inevitably involved in a global strike mission.Of the many direct methods,Gauss pseudospectral method（GPM）has been demonstrated as an effective tool to solve the trajectory optimization problem with typical constraints.However,a series of diffculties arises for complex constraints,such as the uncertainty of passage time for waypoints and the inaccuracy of approximate trajectory near no-fly zones.The research herein proposes a multi-phase technique based on the GPM to generate an optimal reentry trajectory for HV satisfying waypoint and nofly zone constraints.Three kinds of specifc breaks are introduced to divide the full trajectory into multiple phases.The continuity conditions are presented to ensure a smooth connection between each pair of phases.Numerical examples for reentry trajectory optimization in free-space flight and with complex constraints are used to demonstrate the proposed technique.Simulation results show the feasible application of multi-phase technique in reentry trajectory optimization with waypoint and no-fly zone constraints.     

涡轮叶片多重精度MDO方法

考虑到多学科优化设计(multidisciplinary design optimization,MDO)的效率和精度,充分发挥当前涡轮叶片各种精度分析方法的优势,提出了涡轮叶片的多重精度多学科优化设计策略.利用协同优化策略在学科解耦和协调方面的能力,引入包括流固紧密耦合分析、流固热松散耦合分析和近似方程在内的涡轮叶片设计中的多种精度模型,结合两点式标度函数和优化过程阶段性收敛后更新,改进可变复杂度建模方法处理多重精度模型的能力,研究结果表明:仅调用9次高精度流固耦合分析就能确保涡轮带冠叶片多学科优化设计的效率和精度.      

基模高斯激光束高倍率扩束实验研究

基于激光光学设计了一个适合实验室环境的高倍率激光扩束系统,并进行了相应的实验研究。实验结果表明束腰半径为0.295mm的激光束,最大被扩束至束腰半径约12.04mm。     

基于可靠性的太阳能飞机多学科设计优化

针对太阳能飞机典型任务要求,建立了以总重最小为目标的多学科设计优化模型,考虑飞行性能、能量、重量3个学科的设计变量和相应约束条件。同时考虑设计变量的不确定性影响,将序列优化及可靠性评估方法引入到并行子空间优化过程中,顺序执行可靠性分析和多学科设计优化以提高执行效率。在优化过程中应用响应面近似并不断提高模型精度,降低了计算成本。利用iSIGHT软件搭建求解平台,以欧洲太阳能飞机"HeliPlat"作为算例,验证了分析模型的合理性和优化方法的有效性。基于可靠性的多学科设计优化框架有望用于更贴合工程实际的太阳能飞机设计。     

中尺度预报模式不同方案实验研究

以大雾天气为例,利用WRF中尺度数值预报模式对各物理参数进行调整,从而验证各物理方案对大雾形成和发展的作用,并将其与控制性实验进行比较。对水汽通量散度、雾区范围分析,结果表明：这三个敏感性实验都不能很好地反映实况,因此原控制性实验更适合做定量定性研究。     

Novel intelligent water drops optimization approach to single UCAV smooth trajectory planning

Trajectory planning of unmanned combat aerial vehicle (UCAV) is a rather complicated global optimum problem in UCAV mission planning. Intelligent water drops (IWD) algorithm is newly presented under the inspiration of the dynamic of river systems and the actions that water drops do in the rivers, and it is easy to combine with other methods in optimization. In this paper, we propose an improved IWD optimization algorithm for solving the single UCAV smooth trajectory planning problems in various combating environments. The water drops can act as an agent in searching the optimal UCAV trajectory. The detailed realization procedure for this novel approach is also presented. In order to make the optimized UCAV trajectory more feasible for exact flying, an efficient path smoothing method called the κ-trajectory is adopted for smoothing the single UCAV trajectory. Series experimental comparison results show the proposed IWD optimization algorithm is more effective and feasible in the single UCAV smooth trajectory planning than the basic IWD model.     

先进复合材料ＡＧＳ结构损伤扩展分析

基于精细加筋单元模型提出了一种用于先进复合材料格栅加筋(AGS)结构的损伤启始和扩展分析方法.该方法同时考虑了层内损伤和层间损伤,其中,层内损伤包括蒙皮纤维破坏、蒙皮基体开裂、蒙皮纤维-基体剪切破坏以及肋骨纤维破坏,而层间损伤为蒙皮分层损伤.对于层内损伤采用材料常数退化准则;而对于分层损伤,提出了一种新的等效刚度退化准则.通过典型算例证明了该损伤模型用于AGS结构分析的有效性,并详细分析了中心含孔复合材料正交各向异性格栅加筋曲板和光板在轴压下的损伤扩展机理和行为.计算结果表明,蒙皮层内损伤往往先于分层损伤发生并扩展,纤维-基体剪切破坏在45铺层扩展速度最快,分层损伤区域极易发生局部蒙皮失稳.